Reviews
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA NC750X, HONDA PCX125, HONDA SUPER CUB110, SUZUKI Gixxer 250, Others , HONDA CB300R, HONDA CB150R
Highly durable.
I bought the VisorBody (transparent) and Bracket Set a few years ago and installed them on my Initial ModelFORESIGHT.The VisorBody is a slightly more flexible material.I haven't had any cracks or discoloration at all so far. It looks like it will last a long time. View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA NC750X, HONDA PCX125, HONDA SUPER CUB110, SUZUKI Gixxer 250, Others , HONDA CB300R, HONDA CB150R
I used it on Grom!
I use it on my Honda Grom, which I use for commuting and touring. I bought the Knuckle Visor to alleviate some of the biting of my hands in the middle of winter. I was able to install it firmly with this Bracket. View detail
Fits: YAMAHA MAJESTYS
Purchased for installation
I bought it to install the Knuckle guard from Daytona
https://www.webike.net/sd/21988767/
(HonestlyQuantity):(I liked the set lol)
Quality is worth the price I had the impression that it was solid
It is also possible to create a variety of patterns in various positions in terms of the shape of the Universal Product Only if you are
PCX for Universal Product (2012) I purchased it after checking the Manufacturer's compatibility chart to see if it would fit the
However, the screw thread of OEM Mirror and the mounting holes of this product did not match
The OEM is probably the M10 and this looks like the M8
I had no choice but to drill a hole in it and it was successfully installed
It is recommended that you check the screw thread of your motorcycle's Mirror I will
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA NC750X, HONDA PCX125, HONDA SUPER CUB110, SUZUKI Gixxer 250, Others , HONDA CB300R, HONDA CB150R
Installation is somewhat Large strange but it is a Universal Product so it's up to the ingenuity
MAJESTY 4d9 with Knuckle visor (Smoke) We installed it together.
I could have liked the OEM Product from Y's Gear,
I thought that Universal Product could be used in other cars, select this.
Although I had assumed it to some extent, that choice is somewhat troublesome..
In the above vehicle, the distance from the Mirror section to the front is insufficient,
This Bracket Only could not be installed.
So purchase two additional OffsetHolder 45 from Tanax.
(Considering vibration and durability, and 10 mm hole not too long, not too short, with a limited Size
I thought that it might be going to end the Home center all the while before obtaining the matching Bracket,
Although it was unexpected expenses, dare to select exclusive items)
Arrange to avoid BrakeReserver, distance is OK.
But now the height of the Bracket is too high, the bottom is the skusca.
By installing Bracket from under OffsetHolder
I was able to finish just right Position.
There is not much blur of Mirror,
Quantity the Handlebar : Pair (for Left and Right) Also check that there is no interference with Screen.
Along with the satisfaction of being able to finish!
I thought that it was manageable depending on the ingenuity.
And I also thought that the OEM Product was well done.
As a result OEM Product was cheaper,
I knew when I had to purchase additional OffsetHolder, but I could not withdraw even later,
It looks better than the OEM for the appearance and the windshield effect,
I decided to convince myself that it was good in Kore.
Apart from Visor and sold separately,
I think if it is only cheaper a little more.
* The item itself is very good.
View detail
Fits: YAMAHA MAJESTYS
It is necessary if you wear Knuckle visor.
There are a lot of mounting holes, so I will not choose Motorcycle.
It will be like a little puzzle so it's better to see the situation after temporarily stopping it.
Surplus Color and Screw become Garage's fertilizer.
It is surprisingly useful.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA NC750X, HONDA PCX125, HONDA SUPER CUB110, SUZUKI Gixxer 250, Others , HONDA CB300R, HONDA CB150R
[Webike Monitor] It attached to CB400 SF H/V. attachment was ended in about 30 minutes. Since work is only done as the description, I think that it is not so difficult. Since fixing position adjustment of the Knuckle visor and a
[Webike Monitor] It attached to
CB400 SF H/V.
attachment was ended in about 30 minutes.
Since work is only done as the
description, I think that it is not so difficult.
Since fixing position adjustment of the
Knuckle visor and a Mirror also worked by actually straddling on a Motorcycle, it was a cinch.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA NC750X, HONDA PCX125, HONDA SUPER CUB110, SUZUKI Gixxer 250, Others , HONDA CB300R, HONDA CB150R
It purchases in order to attach the Knuckle visor of the company to CB1100. It was thought in the Stay and color that this price was somewhat high. The Knuckle guard is attached firmly, without it seeming that it is bent by a wind pressure. While
It purchases in order to attach the Knuckle visor of the company to CB1100.
It was thought in the
Stay and color that this price was somewhat high.
The
Knuckle guard is attached firmly, without it seeming that it is bent by a wind pressure.
While using from now on, I observe
rust and that durability.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA NC750X, HONDA PCX125, HONDA SUPER CUB110, SUZUKI Gixxer 250, Others , HONDA CB300R, HONDA CB150R
It is an instrument which fixes the knuckle visor purchased in order to prevent the cold of the back of a hand in a winter season. Keep in mind that it is necessary to purchase the visor itself aside from this product. Black surface coating is car
It is an instrument which fixes the knuckle visor purchased in order to prevent the cold of the back of a hand in a winter season.
Keep in mind that it is necessary to purchase the visor itself aside from this product.
Black surface coating is carried out to metal stay, a mirror is removed, three sorts (two sorts of order adjustments, one sort of slope regulation) are attached, and the hole for fixation which uses fixing to the hole for mirrors is equivalent to M12, M10, and a reverse hole with the attached bolt etc.
Although the removed mirror is attached to another hole of stay, a fixed position becomes high from a location from the first in 2~3-cm this side.
Although the mirror currently used is Napoleon's Klos 3, since it is a location just before not interfering with a visor, I consider that it is better to have checked whether the mirror currently used could be used as it is, and to consider purchase.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA NC750X, HONDA PCX125, HONDA SUPER CUB110, SUZUKI Gixxer 250, Others , HONDA CB300R, HONDA CB150R
These brackets are part of the knuchle visor set and have a universal set of holes to suit moast bikes using the mirror shafts as mounting points, they can be left in place when the visors are removed for summer riding,are powder coated and very solid.
These brackets are part of the knuchle visor set and have a universal set of holes to suit moast bikes using the mirror shafts as mounting points, they can be left in place when the visors are removed for summer riding,are powder coated and very solid. View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA NC750X, HONDA PCX125, HONDA SUPER CUB110, SUZUKI Gixxer 250, Others , HONDA CB300R, HONDA CB150R
Although Ho of the knuckle visor reported in detail, wearing requires this stay. In PCX, it becomes a thing of the diameter M10 of a mirror. Although three holes are open to fixation of stay, the hole of the location in a picture is used in PCX.
Although Ho of the knuckle visor reported in detail, wearing requires this stay.
In PCX, it becomes a thing of the diameter M10 of a mirror.
Although three holes are open to fixation of stay, the hole of the location in a picture is used in PCX.
And please outside carries out [ whole spacer ] the mirror and equip with stay.
Although the washer and bolt for adjustment also followed the attachment stay set in addition to this, only the screw which attaches a visor was used for things other than stay in PCX.
View detail