Reviews
Point is that it is a little short.
I had been using a combination of a 45cm Wire and Dial lock for the Helmet lock, but it was not very easy to use, so I decided to use this slightly shorter product to make it smoother to attach and detach.
It is the perfect length to stop the D-ring from the Handlebar and leave it on the Tank.
The 40cm version can be used in a similar way, but I think this one is more compact and SMART when not in use. I think this one is more compact and SMART when not in use, and it does not get in the way even if it is attached to the handlebar.
However, after one day of use, the white cover part was dirty and the paint was bald. It's OK because it's a practical product, but it might look shabby in the early stage.
View detail
For locking luggage when touring
Touring and other activities that take you away from motorcycling for a while but still allow you to carry luggage and other items.
I bought this for when I have to leave my Helmet.
It's easy to lock and unlock, and the Ring at one end is very nice.
I found it easy to use.
On the other hand, Wire's thinness may not be as secure as it could be in terms of security.
There is a psychological difference compared to not having it.
All in all, it was very convenient for a little use.
You could buy several of these for each vehicle and load them in each one.
Yes
View detail
I didn't want to put a helmet lock on the body.
I did not want to put a Helmet lock on my vehicle body, but I also do not carry a Helmet with me, so I purchased a product that met my needs.
It would be easy to cut with tools, but it is better than nothing. It's cheap.
I think it is easy to use because you can do many things with it, where you put it, what you put it on, and how you use it.
I like that it is Dial type.
View detail
Ease of use
Best of all, it is large enough to carry and use without being bulky.
Personally, I think that a longer length would have been easier to use, as it was too short to use for the Helmet lock.
View detail
Even with a simple lock, you'll feel more secure Up!
I had been using the same Blackops with the Wire in Coil form, but it was difficult to use for Helmet locks, so I purchased this product additionally.
Dial lock can be hung on the D Ring of the helmet, or looped with wire and hung on the chin of the full face.
It can also be hung on the fastener part of the Tanax Seat bag, so it is useful for locking the bag for short periods of time when taking a break at ServiceAreaetc.
It is a simple lock, but it is a deterrent and makes a huge difference when you are out touring.
View detail
Security Measures
It is a Multi lock that can be used for Helmet, Seat bag, and other small security measures.
I use this multi-purpose lock because my Ducati does not have a Helmet holder.
This lock is also useful when using Tandem with Scooter, as two helmets under Seat is difficult due to capacity.
I would recommend it to those who do not have a helmet holder as there seems to be a lot of theft of helmets.
View detail
For Helmet lock
I bought this product because I don't have a helmet holder, and it is easy to use and seems to have a good security effect. View detail
Safe to use
Like you, I put Helmet on Mirror and use it when I leave the Motorcycle.
The OEM Helmet lock is poorly positioned and difficult to use, so this is more convenient.
However, the wire part is Straight, so it is a little difficult to install.
Coil shape is more manageable and Quantity:I also wonder if it is easy to Set.
But something about the peace of mind of being able to connect your belongings to Motorcycle and protect them from theft.
It is compact and can be placed in a Wear- or Waist-Bag, so it is easy to carry.
We will have them continue to be active in the future.
View detail
To prevent theft of SeatBack
[How is it used?
SeatBack locking & Body theft prevention
Was the one you received as per Image?
Street Image
How was your experience with it?
Easy to use because of Wire.
It can be used in a loop or wrapped around somewhere.
It uses Tanax SeatBack and has a hole for a key at the zipper.
I would buy a Padlock, but if they remove the Body from the Seat, it's useless...
I was looking around for a new product and found this one.
It seems to be used in the locking Main of Helmet and has no use for SeatBack.
I was worried that it would pass through the Zipper section, but it was the perfect Size.
Because it is a Carabiner type, it can be hooked up simply by applying a Hook.
Also, when removing it, the Hook must be pressed, so it will not come off while running.
Dial key is very easy to set up.
All Wire sections are also protected, so there is no risk of damage.
Dial can be left open and hooked up only when leaving Motorcycle, for example.
It is also appreciated that it only needs to be locked.
[Points to note]
The Hook is rubbing against the Zipper and the paint is peeling.
How did it compare to other products?
Very convenient as it does two jobs in one.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
It can be used for simple locking of helmets, etc.
This product can be used as a simple lock for helmets, etc. The Small Type has a solid wire, so you can feel secure when shopping! View detail
I guess I could disconnect if I wanted to.
[Usage]
The vehicle's helmet holder cannot be used with the side bag attached.
This is turned on the Handlebar to lock the D Ring
[Is what you received as Image?
It was just like the Image. It is a little cheap.
[Try it.
Dial is easy to turn. It is moderately hard so that it can be passed through narrow handlebar gaps.
(Points to note)
I wonder if it would work for someone who is serious about stealing.
Compare with other products
There is also a helmet holder that attaches to the handlebar.
I chose this product because it is unlikely to be attached to the Taper Handlebar.
Opinions and requests to Manufacturer
I think it could be a little cheaper.
View detail
simple lock
I purchased this for use with the Helmet lock.
The 3-digit dial lock is not thick in diameter, so it may be difficult to use the lock for long periods of time.
Personally, I would like to see longer, thicker diameter, key Type, etc.
View detail
Useful to have
[How is it used?
Purchased to prevent theft of my Road motorcycle's Saddle and to lock the Zipper on my Seat bag and Rucksack.
How was your experience with it?
It is durable enough for a portable lock and easy to use.
The Ninja 400 has a standard helmet lock, so I haven't used this product, but I think it can be used as a helmet lock as well.
It's also good to have a wide range of colors.
[Points to note]
Of course, the key is made of gold, so it needs to be installed in a place where it will not damage the motorcycle.
View detail
Happy with the color and design.
This is a great product.
The Wire itself seems sturdy.
View detail
It can be used for anything.
I bought it to accompany my motorcycle.
I don't usually use it, but I use it when I go touring.
In addition to securing the Helmet, I also fasten the bag to the body of the vehicle to prevent the luggage from falling out.
The key is a 3-digit dial, so it's easy to use.
It's small and moderately long, so it's a good idea to have one as you can put it under the seat of your motorcycle, attach it to your Handlebar, or put it in your Jacket pocket.
View detail
Good for Tandem grip
I bought it for my SeatBack and Helmet lock at Tandem
When I bought it, I wasn't sure which type of wire length to use, but I used the Tandem grip to get the It was just right for use Aside from durability, the Wire also has a coating protection, so you can feel comfortable with it
Like all of them, the numbers are hard for old eyes to see..
View detail
It is a very good Large Kiso.
I think that the wire part is firmly coated and the thickness of Wire is sufficient.
However, if the key part is Stainless Steel it is safe against rust. (Motorcycle storage place is under the roof, it is still for the first time to use for half a year, so now there are no rusty things)
View detail
Just feeling good.
It is easy to lock with a good Length
It prevents Tank Bag and Helmet from being stolen.
The Wire part seems not to be hurt by Vinyl coating and it is likable.
I attached a Carabiner that can also be locked to the rings
I am trying to use it without having to make it Loop.
This Recommendation
View detail
It is a good product
I installed the outside helmet holder on the vehicle, but I purchased it because there is no for Tandem.
It is a product that I found after searching for what specialized for Helmet. Ideally it was to lock the Wire by making it round the Handlebar, but it was a product that could be used as intended. Since it is not too long, there is no worry that Helmet will move from Handlebar.
When not in use, it gathers in Compact, so it is put under Jacket's Pocket and Seat.
The lock number is three digits, but you can easily change it.
Changing is easy, but I think that durability can be expected rather than making a fancy.
Material attached to the lock number : It can be done with plastic objects, but please be careful not to throw away as it is casually attached to the item. Even if we lose it, we can substitute if there is a thinner one - - -
View detail
Easy to use!
I bought it for locking Seat bag! Henry Higgins Seat bag locking hole was burned because the lock part was not thick enough to enter, but it was good as it entered the hole of Zipper. It was nice that the part of the lock was easy to use. View detail