Reviews
Fits: SUZUKI Address V100, SUZUKI Address V100
OEM's with Stages for acceleration modification.
As a precaution for installation, …Crank is an Opposite Thread Screw and the length of the Spline is limited, so there is a possibility of crushing it if it is tightened too much.
Grease is applied to the WR, but it is too little, so I applied additional grease. The Plus screw on the back cover is hard, but it loosens easily with the Impact Driver.
The PRESS processing on the back cover is rough in some areas and requires a compromise by the user.
The performance is more than sufficient, and although it may not be as good as the High Speed Pulley, it accelerates linearly with the Axel without any staggered acceleration.
To take advantage of the High Speed Pulley, it is necessary to consider the driven side as well, so if you are assuming that you are going to install it by itself, I think you will not be dissatisfied with this Pulley kit.
The weight of the attached wr is also a good feeling. I think it could be a little lighter for a young girl.
View detail
Fits: SUZUKI LETS4Palette, SUZUKI LETS5, SUZUKI LETS4Basket, SUZUKI LETS4, SUZUKI LETS4Palette, SUZUKI LETS4Palette
Good quality
A reasonable price. a performance similar to that of a genuine product. I think the durability is okay, too. I am satisfied enough. View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
For periodic replacement of the drive train
Since the mileage is now over 35,000 km, I thought that both Belt and Pulley were probably deteriorated and worn out, so I bought them.
I replaced it myself.
The Nut (24mm) that holds the Pulley in place is tough without an Impact wrench. By the way, it is an Opposite Thread Screw.
I think both Belt and Pulley are OEM Product quality.
I went with DAYTONA 12.5Gram because the weight roller that came with it was too light.
They run well.
View detail
Fits: YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA jog sports, YAMAHA Apprio
I do not recommend it.
The inner diameter of the pulley boss seems to be slightly smaller than the OEM product, so it could not fit in the shaft and could not be installed. View detail
Fits: SUZUKI VERDE, SUZUKI VERDE, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle)
Quantity:Save with the set!
I bought this to renew the drivetrain of my old Scooter.
The installation was painless, but the Scooter is a pain in the ass to get there.
After the replacement, acceleration became smoother and easier to ride.
View detail
Fits: SUZUKI LETS4Palette, SUZUKI LETS5, SUZUKI LETS4Basket, SUZUKI LETS4, SUZUKI LETS4Palette, SUZUKI LETS4Palette
Pulley and Belt can be used, but
Pulley and Belt are available.
I think it's worth it just to buy two items.
The Weight roller/Slide Piece is not worth using!
Rather, using it will hurt Pulley.
Pulley can be used for processing!
View detail
Fits: YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Jog (2 cycle), YAMAHA Vino (2-stroke), YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Super Jog ZR, YAMAHA Super Jog ZR, YAMAHA Axis 50, YAMAHA BJ, YAMAHA BJ, YAMAHA Apprio, YAMAHA Apprio, YAMAHA Axis 50, YAMAHA Jog Aprio Type 2, YAMAHA Jog Z, YAMAHA JOG-EX [3YK1-5]., YAMAHA JOG-EX [3YK1-5].
I've started to shake off the Meter
I bought it used with 7,000 miles on it The top speed was a bit before MeterFull scale
I went to WayBig to check out the parts to replace the belt and I chose this one I used a special tool to replace the pooch Lee lock safety belt and the Impact I used a wrench When I built it up and tested it, it was a big ri The highest speed shook off the Meter I don't know whether the new Belt or Pulley worked, but I am satisfied with Large
View detail
Fits: HONDA Byte, HONDA TODAY, HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA SMART DIO, HONDA SMART DIO, HONDA GIORNO CREA, HONDA Giorno, HONDA CREA SCOOPY
about honda scoopy
After using this device, my front section is more powerful, the back end is also more stable, but 6 grams of Puli Zhu is too light, leading to the rear speed weakness View detail
Fits: SUZUKI VERDE, SUZUKI VERDE, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle)
Easy and convenient!
Due to belts out of my parent's VERDE, I purchased it as a driving system maintenance.
It was my first work, but I was able to replace it without any problem with Large.
Durability will be the judgment of the future.
View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
It changes dramatically.
Before the change, the low speed was lost, and the maximum speed was about 70 kilometers, but only by exchanging, it began to exit from the initial speed in a stretch to 0 kilometers.
It was caused by the fact that Weight roller before exchanging was terribly unbalanced, but this product is all Recommendation as it is enough to just rearrange without considering anything.
View detail
Fits: SUZUKI VERDE, SUZUKI VERDE, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle)
Everything you need is easy to use
Purchased for Maintenance of Scooter running 14000 km. Everything you need is easy to use. I also have solid builds. Clutch Spring etc. are also sold from the same Manufacturer and purchased at the same time. Maintenance of drive system was cheap and easy to do. View detail
Fits: HONDA Byte, HONDA TODAY, HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA SMART DIO, HONDA SMART DIO, HONDA GIORNO CREA, HONDA Giorno, HONDA CREA SCOOPY
Large huge change.
Secondhand mopeds (1. After buying about 5,000 km), I ran about 10,000 km, so I just exchanged it.
Because I was not confident in my work, I left it to the Motorcycle store.
The second-hand condition seemed to be the replacement period, seems to have exchanged at a good time.
Perhaps it is a used car that was sold by returning Meter. Lol
For now, I'm relieved for a reasonable period.
Regarding running, it seems that the start has become considerably Smooth.
Also, vibrations from near the Engine Cover that had been occurring for a few months ago have gone.
Commuting etc. I think that those who are riding everyday are parts to be replaced periodically.
View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
Unique to Scooter!
For the drive system Refresh of SUZUKI ADDRESS V100 which I got at commuting this time, Pulley / Weight roller / I bought a product with V Belt set to Set.
It was difficult for me to change the drive system of Scooter for the first time, but it was not a problem if I replaced it while examining it calmly.
If you lighten Weight roller for this product / Instruction Manual such as effect of goods such as what becomes heavy, it is interesting for Scooter beginner self.
I feel like moving to Smooth as the essential performance.
Because most of us do not get on in the useless condition, we do not know much about the difference ...
However, it will not get worse and I feel satisfaction that I could refresh the driving system / There is a sense of security!
View detail