Reviews
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Outside Grip (Pierced Type) Convenient for installation of
Outside Grip (Pierced Type) It took a little time to fit the Accelerator Wire thailand core when replacing the throttle cone. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
For Grip heater installation
I bought this one because it is variously Large strange to divert OEMThrottle.
I am not sure about High Solo conversion.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
When you change the grip of SR400, you should use Quantity:Let's exchange in Set!
As per Title, if you want to exchange Grip, you should do it together.
The ThrottleGrip of NORMAL is a special product for Normal grip.
If used as is, processing will be required.
This one was reasonably priced and the quality was fine.
There was just a little BALI, but it is Large sturdy enough to lightly adjust with File.
It seems to be 8%High throttle, but I didn't feel that much of a change.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Cheap.
I recommend it because it is a reliable Manufacturer and cheap. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It is very useful for Touring.
Because Throttle operation is Large strange because there is a lot of constant speed cruising in Touring.
Even though it is called High Solo, it is about 8% wide, so it can be said that it is a part to support Axel operation rather than driving.
good point
The accelerator operation at constant speed has become easier.
It's easy to install, just replace the OEM Throttle and you're good to go.
It's very cosy.
The quality of the plastic is very good and durable. 3 years of use and no problems.
A bad point
It's not a running High Solo.
It's tiring to keep the Axel open for a long distance. There is vibration and so on.
When the range of Accelerator operation is extended, Throttle operation is less tiring because there is more room.
It's a simple but good part, if you try it.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Might be a necessity when changing Grip heater.
The Grip heater is replaced at the same time as the installation of the Grip heater. 8% High Solo. 2 birds with one stone. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It is also a necessity when changing Grip heater.
The Grip heater is replaced at the same time as the installation of the Grip heater. 8% High Solo, no need to modify the OEM cone, two birds with one stone. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
For now, I'm happy with it
I was a little disappointed that there was some BALI left on the product It is easy to install However, I thought the change would not be as much if it wasn't a bit more High Solo-like View detail
Fits: YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA Remote controller jog
It is not High Solo for JOG
I previously purchased this Manufacturer's Throttle for my CUB and DIO
Both of those items were slightly High Solo, so I'm going to take a slightly High Solo as well I bought it with high hopes
When I put it on, it had the same pull as NORMAL
When I checked, the product description said "High Solo" It was a misunderstanding based on our assumptions, as there was no mention of
You have listed the OEM Parts part number NORMAL same etc., not High Solo I would have appreciated it if you had clearly stated that
High Soloization was not achieved, but the product itself is very accurate and the OEM product is very good I think it's good enough for Repair
View detail
Fits: YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA Remote controller jog
Tsuruntsurun!
[Color] Buy Clear color. Replacement was also easy and satisfied! Well, especially noticeably there is nothing, but the price was cheap, it was a convincing result! View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Good product
I bought two products because the original was broken. Good quality plastic and finish, acceptable price. This is a very good alternative to genuine one. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I used it for Grip exchange of SR 400.
I used it when I changed Grip and Handlebar of SR 400. If it is OEM's Throttle cone, there is a protrusion and it is not possible to replace Grip well without cutting it, but by using this product it was possible to install it without machining! Although it was said that it will be some High Solo In a good sense, it was almost the same as OEM, so it did not hinder operation.
When I exchange Grip I definitely recommend this item.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Also FCR Carburetor Body mounted car
My SR is equipped with FCR Carburetor Bodycarburetor. I think that it was certainly 8% High Solo, but it's not that much of a bother you, but rather it's easier to downshift easier. Because the color is also Black, the cone became inconspicuous and Visual became better as well. By the way, Grease is not painted on Handlebar.
Correct answer to paint?
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Rather than processing OEM
Rather than machining the OEM's Throttle leaves, it is easier to use this item as an open end. Since the size of 120 mm Size Grip is exactly matched Size, I put RossiGrip in it. I thought that it would suit the SR, but it became an ordinary grip because it is too thin of the OEM and it is very easy to grasp.
Weight's heavy Bar End was attached and the vibration was alleviated.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
This is for PenetratingGrip
Since the Accelerator Wire attachment part of the OEM cone worn out, it was exchanged for this.
The reason for choosing this product
1. Being Pierced Type
2. Being Flat face
Two points.
If SR replaces Handlebar with Other Company Product, hands are numb with vibration. In order to prevent it, we have installed Bar End Weight, but of course it will be a Penetrating end.
Until now I was cutting and using the end of the OEM cone, but since this product is Penetrating it can save time and effort to scrape and it is cleaner than I can.
Also, because the OEM is an octagon, corners will appear on the surface in the case of a thin Grip, but this is not bothersome with the Flat face. (Because it is a slippery, I think that it can be a bit slip-free Pattern fit)
Since the color is Black, the Grip end is also beautiful. (When it is an OEM, White appears from the end and Parenthesis is bad)
Adaptable GripLength is 120 mm and choices of Grip are many more good.
For High Solo, I uploaded photos so that I can compare hole positions with OEM. Throttle does not become heavy with High Solo which is slightly out of position of hole position and it is nice feeling.
Installation is Seat - Remove Tank, loosen AxelWire, then open Throttle holder and replace, then add Grip to restore all. Even if you lubricate Wire, you can replace it for 2 hours.
View detail