Reviews
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1100
Cool
You can't ask for visibility with this Screen's color.
It is really dark.
But I think it looks pretty cool.
View detail
MRA cb400 super boldor
Very good material delivery was fast from Japan to Singapore via EMS tracking, first time buying from webike Japan will definitely buy again if need accessories. View detail
[Color] Smoke? [Color] Which is correct?
Product photos are [Color] Looks like Smoke to me. [Color] Clear arrived.
In the case of Smoo, it took me about 3 months to get an email saying it would take a long time to deliver the product. [Color] I thought Smoke would deliver, which is correct?
It seems to be slightly quieter at about 120/km/h.
View detail
Completion of VARIO imitation
[How is it used?
CRF250M with Universal Screen and parts purchased from Amazon.com
Was the one you received as per Image?
I found it at a special price, so I wondered if there would be scratches, etc., but I was relieved to see that it was a good quality product. [Color] Smoke is moderate, and the included Windscreen Mole is nicely installed and high quality.
Was the installation difficult?
I drilled 4 holes for M6 bolts and made the bracket myself using aluminum rods and crimp terminals at the home center. It took a lot of care to get the center just right, but I think it turned out beautifully.
How was your experience with it?
It is lightweight, thick, and strong. If you use only this product, the wind will blow around your neck area, which may be difficult in the winter, so we added a cheap Variable Screen from Axxon.
View detail
Fits: YAMAHA Tricity155, YAMAHA TRICITY125 (BirdCity125), YAMAHA TRICITY155 (BirdCity155)
I wouldn't say it's an Extremely Large, but it's not bad.
I happened to find Screen Touring for BirdCity in stock, so I bought it and installed the gradation type in Smoked color on the Initial Model BirdCity125.
Bolt longer than the OEM bolt supplied with the product is used to raise the mounting position. NeoPlane Washer. Spacer of Sponge rubber called "Spacer" is inserted between the Bracket and the Screen.
Instruction Manual with 8mm height is Quantity:2pc. Set, 10mm is Quantity:2pc. It says that the set comes with different mounting holes at the top and bottom, but the one I received contained 1 pc. of 8mm and 3 pcs. of 10mm.
If it is too long, just shorten it, but I don't think it matters much because where there is a 2mm difference, the actual item looks like it is only a 1mm error, and in the end it will be crushed when the Bolt is tightened during installation.
The attached molding to the screen edge was not installed because the molding itself was hard and positioning it was troublesome.
Screen's [Color] Smoke, but you can see the road surface in front of the vehicle through the Screen.
In BirdCity's Riding position, there is no problem to choose Black if you are a Scooter, because you will not see through the Screen with your body face down.
The OEMScreen felt like it was snugly attached to the cowl, but with the use of the above mentioned Spacer, it was mounted to create a gap, and it seemed as if a draft might get in while driving, but this was not the case.
However, it is not longer than other external screens, so the windproof range is from the neck down.
I wear a full face helmet, but right after the Screen was installed, I felt the wind only under my chin and thought that the OEMScreen was just a Meter visor.
The rest interfered with the previously installed Hand guard.
Even with interference, Screen's Quantities:Pair (for Left and Right) The handlebar is thin only at the part where the handlebar is cut, and the hand guard itself is soft, so the handlebar can be cut into a quantity.:Pair (for Left and Right) It does not interfere with driving as the Guard only deflects slightly when turned fully off.
I think the other brand product of BirdCity that does not seem to interfere with the hand guard is this Screen or Asahi Windshield, but if I had to choose by design, it would be this one.
View detail
Parenthesis is good
Originally, the original Screen was halfway high, and because of my high seat height, it didn't make much sense to me.
I suppose I should use a taller Screen, but I don't want to look like an old man, and if I ride NAKED, I will be exposed to the wind.
That's how we ended up with this Screen.
Parenthesis is good, much better than Original.
Unfortunately, I have to return the original screen to the original one when I inspect the car (it is not tall enough), so I have to find the original screen I had stored away.
View detail
Improved wind protection effect and texture
I used to have a MRAScreen spoiler type (MRAScreen spoiler) on another Motorcycle. [Color] (Smoke), and since the windshield effect, quality, design, etc. were good, we installed it on the motorcycle in question as well. Since there was no screen spoiler type available, a touring type ( [Color] (Smoke). The difference I felt was that the end part of the screen did not bounce up, so the wind did not go up as much. The screen is a few centimeters longer than the OEMScreen, so there is more area that is not directly exposed to the wind, and the screen has been extended to the top of the electronic devices other than navigation (Radar etc.), so the wind is less likely to hit the RadarCase, making it easier to see.
We have not run in the rain, but we anticipate that the RadarCase will provide rain protection.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1200R, KAWASAKI ZRX400
The shading is not as good as in the photo.
A little more [Color] Smoke dark would have been nice.
Otherwise, I am satisfied.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750 R, SUZUKI GSX-R1100
I ordered it three months ago.
[Color] I ordered the Clear/Gradation but received the Ku Only rear. View detail
If you like the look, it's Recommendation!
[How is it used?
Mainly used in Touring of 100-200km
Was the one you received as per Image?
It's a lot bigger than I imagined.
Was the installation difficult?
The Screen itself is easy to install. I didn't install the molding because it was difficult to install.
How was your experience with it?
Much less wind pressure from the neck down on the highway!
It's a lot easier to get down lightly.
[Included Parts:were they on?
[Was there anything that disappointed you?
It's a matter of taste, but I thought it was a little too Large.
I hesitated with the GIVIScreen, but I decided to go with this one, which is a little bit larger and emphasizes the windproof effect.
View detail
Better looking than OEM.
If it is longer upward than OEM, the windproof effect is increased and I am satisfied.
However, it takes 3-4 months from order to delivery.
It arrived when I forgot about it.
View detail
As the name suggests, it is for Touring.
* Before Screen Touring, I used Screen Original, but Wind Cutting to Rider is totally different.
* The video shows the Touringscene with this product installed.
[How is it used?
It is a town ride - Touring.
How was your experience with it?
The name "Touring" is also for Touring.
How did it compare to other products?
Wind cutting to the driver is less than OEM products.
[Points to note]
Both ends of the attached braid should be crimped with the attached Bracket.
Other items that would be helpful
Included Parts:With/without braid and Brackets to stop braid.
Items to buy together/Plastic coating agent.
Opinion and request to Manufacturer/The spare of the braid and the stop Bracket of the braid should be sold.
View detail
Correction on interference with Mirror
Corrections to the earlier posted imprints
I posted an impregnation about the interference with the Mirror, but it was possible that the angle of the Handlebar was also affecting the interference with the Mirror.
In the normal Handlebar position, it may not interfere.
We apologize for the error and make the correction.
The Screen itself, I like very much and I can recommend it to my friends and acquaintances.
View detail
Fits: KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX400
It is a classic.
I don't want a rectification effect. However, you can use Screen [Color] I replaced it with Smoke to give it a tighter look.
The accuracy of the parts is very reliable as they are a popular manufacturer.
View detail
Windproofing as well as its reputation
I installed it in L4. The hole position is Exactly.
You may have a preference, but I like it because it doesn't break down the GSX1300R HAYABUSA forme in a large way.
With the Normal screen, if you don't get down, you'll feel the wind from your chest, but with this Screen, you'll feel the wind from your neck up.
There is no distortion and the forward vision is good when down.
View detail
Less direct hits from bugs.
Installation accuracy is no problem.
It's the wind protection I was hoping for, but it's definitely more than NORMAL.
I'm 5'10", but even if I don't consciously get down, the Small Sow bug doesn't hit my body anymore.
I also like the design that doesn't detract from the GSX1300R HAYABUSA vibe.
View detail
Fits: KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX400
We decided on Design.
The look is completely different and standard, but I installed MRA's Screen.
I was confused between the Spoiler type and the Touring type, but I installed the Touring in hopes of the rectification effect.
The product is as expected as it is sufficiently rectified at high speeds.
I think it's better to use a little torque to prevent the Bolt from cracking.
View detail
Cute little mohawk face!
I bought it because I wanted to make it more windproof.
Color is [Color] I bought Clear
I don't find it particularly depressing in my view.
The OEMScreen made me tired because the wind was hitting my chest, but after the exchange, I was able to get my neck area The wind has gone out and it's quite easy.
If you lower your head a little bit, the sound of the wind is amazing, but if you get down on the Tank, it's windless.
I'm glad I bought it because I do long touring at a high frequency!
View detail
I removed it
I installed it because it's an MRA screen, but the RNINETscrambler has a I took it off because it didn't look good on me
I think the regulating effect is like... Even if I put it on or off, it didn't change that much
I was hoping to make it a little easier for Touring, but it didn't work and Styling was not very effective It made no sense
View detail
The installation method is still a bit confusing
I installed it as soon as it arrived
I installed Screen of the company in G310R before, but I could not understand how to install it It's not easy
This RnineTSCRAMBLER was also a bit confusing
There is a cylindrical RubberNut, but when you close it up, it comes off the Screen with a pop It would be
It seems to have to be stopped at some point
Screen
| |
Screw head
| |
It's like
Also, when you install it, you need to align the screw hole rather forcefully It is not such a thing as making it curved enough to be cracked, but it is a power technique in its own way
I don't think there's anything at all to worry about in terms of quality, but I'd like a translation (I'd like the instruction manual to enter here) That's where
View detail