Reviews
Easy to use as OEM compatible without distortion
Used on ZZr1100 (C1).
The OEM screen was damaged from the attachment point due to age-related deterioration, so MRA's screen was introduced this time for the purpose of repairing it. [Color] Clear? [Color] I was wondering if it was Smoke or not, but this time I decided to use it as a makeover. [Color] Smoke.
The OEMScreen is slightly thinner than the OEMScreen, but has less distortion than the OEMScreen, and has good visibility even when it is tucked into the cowl.
However, Smoke Screen is darker in color than I had imagined, and I think it would be tough to run face down with Smoke Shield's Helmet late at night.
A Screen RimRubber was also included and its length was appropriate and favorable.
I am glad to see that they are making parts that fit older motorcycles as well, as screens wear out due to scratches from flying rocks and need to be replaced periodically. Next time I will try Clear Screen.
View detail
Fits: SUZUKI GSX-R1100, SUZUKI GSX-R750, SUZUKI GSX-R750 R
It may be a little tricky to install if it is your first time.
I replaced it for the first time because the Screen had cracked over time. Naturally, the OEM product was not available, so I was very happy with the product. The product itself is very good, the large size is about the same as the OEM Product and the holes fit perfectly. In the product description [Color] The screen I received was clear/graded, but there was no gradation on the screen. I was fine without the gradation, but now the screen is very transparent and I can see the back of the meter without the OEM gradation. The price is not too expensive and I am very satisfied. The installation depends on the type of car, but I think it will be a surprisingly difficult job if it's your first time. It is not difficult or complicated, but I had a hard time removing the well nut from the screen and upper cowl before the replacement. It is better to remove the upper cowl, although it is troublesome, and you should ask for a new well nut when you install the screen. The old well nut is not reusable. I had to go to the store to buy it because I didn't have the old one ready. It didn't fit easily. The new screen has a clear protective seal on it, so it is better to peel it off before you start work. I noticed the protective seal after I finished and had to start all over again. View detail
Excellent replacement screen
Since the oem screens are no longer available this was my next choice. Excellent fit, mounting holes lined up perfectly. The only issue is the trim piece they supply is horrible. Clear trim that you are supposed to secure onto the screen with metal clips. I bought black rubber trim on Amazon and cut it to length. View detail
OEMScreen was damaged.
I installed this on my 2012 CBR1000RR.
Small scratches on the OEMScreen were becoming noticeable and were replaced.
I think the shape is almost the same as OEM. [Color] Compared to the Smoke-sensitive OEM, this product [Color] The clear design allows for better visibility and recommendation. The installation is also an insertion type, which makes it easier to replace than OEM.
View detail
FZ400R (46X)
Size and shape were perfectly fine.
The mounting screw holes are precisely positioned and the OEMScreen is removed and left in place.
Installation was easy.
The lower Screw hole is in the Upper Cowl, so it may be a bit of a hassle to remove the Cowl.
The process is simple.
View detail
Fits: KAWASAKI NINJA650R, KAWASAKI ER-6f, KAWASAKI NINJA400R
I'm Well in the Clear!
I was a little concerned about the strength of this product, but it is Large strong!
It's softer than the OEM Product, but not a problem at all.
I like it because it is clear and gives the motorcycle a tighter look. Guard on the rim, easy to install!
I think I'll Repeat next time.
View detail
It looks good, but Wind Cutting is great because the height is lower than OEMscreen.
As the title says, it looks good, but Wind Cutting is great because the height is lower than OEMscreen.
I thought about Touring use, and as a result, I replaced it with a Screen Touring.
URL → https://www.webike.net/sd/3459726/
Look → Original
Touring → Touring
It is good to use it for different purposes as shown above.
We have 3 Type, but we still have not installed Screen Racing.
The video was taken with Screen Original installed, but the Wind Cutting sound is great compared to OEM Screen.
[How is it used?
Street riding & Touring.
Was the one you received as per Image?
It is shorter than OEMScreen.
How was your experience with it?
Wind Cutting is increased because it is shorter than OEMScreen.
[Points to note]
Please crimp the attached braid with the attached Bracket.
How did it compare to other products?
Recommend Touring for Touring use because it is shorter than OEM Product.
Other items that would be helpful
Point of installation and hang/attached braid crimp on the attached Bracket.
Items to buy together/Resin Coating Agent.
Comments and Requests to Manufacturer/I would like to see the braid and Bracket sold with Maintenance supplies.
View detail
Fits: KAWASAKI NINJA650R, KAWASAKI ER-6f, KAWASAKI NINJA400R
I'm totally satisfied!
Before purchase, the thickness of Screen itself ? Strength etc. I was worried
Actually when I saw the actual thing, the finish was also beautiful and almost almost satisfactory in terms of strength!
Screen's edge The installation of Rubber was also easier than I thought.
also [Color] Smoke 's Screen is satisfied with fearlessness as it fits a tight feeling.
View detail
Clear visibility
Shape, Fit feeling, Gradation is good, but disposal of shrub is regrettable.
I have a feeling of hurting. Since it is attached to the mall, I hope to attach it.
The screen made by ScreenCraft which was used up to now was cleanly processed and the mall was not needed, so I wanted more time.
Still because the accuracy of the product is good, it is much better than buying cheap stuff like ok etc.
View detail
Fits: YAMAHA FZ1 FAZER(RN21J), YAMAHA FZ1 FAZER(RN17N)
OEM style Smoke Screen
【Items compared with the deciding factor of purchase】
I was coloring OEM ShapeScreen's colorful Screen.
I studied the Smoke of SR Type of ZeroGraph Tea, but the delivery date was unknown. Also I was considering the Carbon type of Magical racing, but there is a sense that Screen itself insisted too much, but since Gold amount was about twice this product, I made it to Original of MRA.
[About installation]
The installation only removes OEMScreen and replacing it, but since the color of Bolt of 5 mm of installation does not match, I changed it to Black's Bolt.
The accuracy of Screen itself was good and the Bolt hole also matched. As for the processing of the edge of Screen which seems to be intact as it is, this product was accompanied by a color mall that matched the Screen of Smoke color, and a gold tool of a mall stopper attached to both ends was also attached.
【Impressions attached】
I am satisfied with the color as I did and the Screen of Large Kisashi.
I think that it is good that the lower side of the Cooleyon is darkly colored and the Screen bottom can not be seen. Also, ETC Antennas was also Large sturdy.
For windproof such as highway, OEM and the same. I think.
View detail
STD TypeScreen
OEMScreen exchanged because of poor texture
- The surface was beautiful and the texture improved
- The color of Black & Clear is good
- Considering the heat in the summer, I think that there is also an STD
I think that it is a good product considering the appearance and function.
View detail
Black is invisible
I bought Black. Installation is easy without difficulty, the appearance is finished in Cool, but the visibility is very bad. I can hardly see the front.
I am considering buying Smoke.
View detail
It's okay, I guess it's pretty familiar.
This sentence is based on my facts but subjectivity enters.
Zero Gra Sports touring - It is an exchange from the Smoke Type, in fact I ordered the SRSmoke Type of Zero Gra, but I am sorry for the production in disappointing ... Cancelation.
Gold I changed it to MRA, OriginalSmoke.
Order! Arrival! Exciting, opening, g ~ ~ ?! There are of course no problem with the shape, packing is also polite, color is ... Brown!
It is the difference in how to catch the color of your country, Guan!
Because Motorcycle is Black, it was good for Black's Smoke really ~
Give up
I do not understand with the photograph, there is no Gradation from Cowl ....
Another point, although this is a difference in manufacturing method, it is the finish of the end, Zero Gra is like a melted finish, but MRA is like an intact feeling by cutting resin with End mill, of course Rubber at the edge is attached There is no problem because you do not have any problem so I'm sorry it's because I do not attach it ... Let's give up ...
I like this, so I would like to refer to it when purchasing, especially those from Zero Gura!
There were various, there are good parts, packaging is polite and Screw is complete than anything (Black pan Screw, Washer, Lock nut) If you exchange from OEM, we recommend MRA !!
Sticker is not on its own (Discreet Logo is Good)
It is easy to install without trouble at all, it is truly GermanyManufacturer!
What does the MRA → MRA person say!.
With that, I get used to it, no ... well I got used to it (Lol) Not bad ~
View detail
I am satisfied..
Because it is a Smoke color, I felt astringent by matching with the black color of the car body.
Japanese Vehicle Inspection Correspondence 's Screen It is a pleasure that the mall attached to the tip is attached.
Screen is scratch-resistant and good visibility.
View detail
MRA of a middle range is regularly used in price as a Screen of an external article at every change. The common Gap of a mounting hole is not in a cheap no brand once. A fine Wound is surely made to a Screen, it is peevish now [ striped ], and the Motorcy
MRA of a middle range is regularly used in price as a Screen of an external article at every change.
The common Gap of a mounting hole is not in a cheap no brand once.
A fine Wound is surely made to a Screen, it is peevish now [ striped ], and the Motorcycle which is carrying out the Body cover daily is ~.
Since 2,000,030,000 cannot be taken out to the Screen which can also be said to be
consumable goods, it is pleasing also in Cost.
View detail
Fits: APRILIA RS250 (Aprilia), APRILIA RS125 (Aprilia)
The resistance of a wind also including a Touring is reduced and it is the highest! Since the model of RS also became old, the Screen also grew yellow, and it was distorted thick and was visible (T_T).
The resistance of a wind also including a Touring is reduced and it is the highest! Since the model of RS also became old, the Screen also grew yellow, and it was distorted thick and was visible (T_T). View detail
Although the Screen of the actual Racing machine was clear, since the authentic positive one of a 13-year Repsol was a Semi-smoke, it exchanged it for the CLEAR. In order to enable it to also stick pure Sticker, form chose the Original type. Since s
Although the Screen of the actual Racing machine was clear, since the authentic positive one of a 13-year Repsol was a Semi-smoke, it exchanged it for the CLEAR.
In order to enable it to also stick
pure Sticker, form chose the Original type.
Since structure of the
Screen and pure lay are solid, it is satisfied.
View detail
The Semi-smoke of the form was purchased as it is pure. tone is also very pleasing well. Whatever it may call it, a pure lighter thing is good!!
The Semi-smoke of the form was purchased as it is pure.
tone is also very pleasing well.
Whatever it may call it, a pure lighter thing is good!!
View detail
Fits: YAMAHA FZ1 FAZER(RN21J), YAMAHA FZ1 FAZER(RN17N)
In case of the clear of normal, a little dirt is dyed only by going inside, and, moreover, is in a very shameful state in the open state. Although what is necessary is just to be pure and to make it smoke, the product here offers the quality which ful
In case of the clear of normal, a little dirt is dyed only by going inside, and, moreover, is in a very shameful state in the open state.
Although what is necessary is just to be pure and to make it smoke, the product here offers the quality which fulfills such a hope.
If there is even a plus driver, anyone will OK attachment.
The body color of every model is fitted comfortable, if it is a smoked type.
Since he did not want to break an overall silhouette and design, normal form was chosen.
Safe, since Long also has when I want to search for the further comfort in this form, although I am satisfactory.
It seems that it has been four years since it equipped, but durability does not so much change that it is pure.
Although maintenance is made to be the same as that of other parts, this point also has no problem.
If it is removed although a thing with open at the time of entrainment the logo of MRA being a seal from an inner side is worrisome, it will be one recommended article.
View detail
Although the manufacturer's racing type was used, since it was short, ZZR1100C had the hard wind pressure and it changed it into the original type before. Since the size of a screen itself was the same as normal, a wind pressure etc. did not have chan
Although the manufacturer's racing type was used, since it was short, ZZR1100C had the hard wind pressure and it changed it into the original type before.
Since the size of a screen itself was the same as normal, a wind pressure etc. did not have change, but if compared with the short, the wind pressure will have improved.
It is preeminent also for the transparency of a screen and it is dramatically clear.
Moreover, since the visual field over a screen does not have a strain, either, it is convenient also when turning down and running.
View detail