Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

Main Stand Clear all

HONDA

11 Dec 2023

Main Stand

Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor

Japanese Webike user

5/5

The upright position gives it a nice old car feel.

[How is it used?
?When I do some tinkering with my motorcycle, it is easier to work and clean with a center stand, and I thought it would be better for my motorcycle to be upright.

Was the one you received as per Image?
It was more solid than ?Image. I think it is indeed OEM.

Was the installation difficult?
?Rubber was hard to screw in, so I applied detergent and put it in a vice.
?I had referred to a YouTube video on how to install the spring, so I shaved about 3mm off the spring and bought a tool to pull the spring beforehand.
?Spring was attached by pulling at the end, but it took a lot of force and was tough. I bought a tension spring hook just for this.

How was your experience with it?
?Of course it's very nice; you pull up the Grab Bar while putting your weight on the protruding part of the STAND, which is quite heavy. But I feel secure because I'm not standing on one leg, but standing firmly.

[Included Parts:were they on?
?I had everything in order. I prepped everything on YouTube to see where and how to use it.

[Was there anything that disappointed you?
?Motorcycle is used but the Center Stand and Engine Guard are new, so it looks almost like a new car at a glance. I am glad it is as I expected.
?No disappointments at all. The only thing is the high price.

■Points of installation and hang
?Spring should be hooked up and installed last. Also, the Spring pulling tool costs 500-600 yen, so you should definitely buy it in advance. It is quite difficult to do because there is an exhaust system nearby.

Availability and clarity of Instruction Manual
?I don't think there was an Instruction Manual to begin with. Everything was taught on YouTube.
?Honda, please thank YouTube for their help.

Notes
?I don't want to knock over the Motorcycle by doing something wrong in the first place, so I always hang a chain block from a beam in the back of the ceiling. (Chain block was bought to move garden stones.)
Again, using the Chain block, Quantity:Pair (for Left and Right) I put a rope through the bolt at the top of the rear shock of the motorcycle and lifted the rear of the motorcycle up to make it easier to work with. Also, at first, I asked my wife to stay on the other side of the motorcycle so that the motorcycle would not fall over. It is good for those who have a variety of tools, but those who work with a minimum of tools need to be careful not to let it fall over.
? There is a Motorcycle shop on YouTube that has installed a Center Stand on a CB400SB, and you should definitely watch that and learn before you do it. Also, he is very skillful and lean.

Items to buy together
?Tension spring hook (like a spring puller)
?In my case, it is an early NC42 CB400SB, so I needed Grinder or sandpaper.

Opinions and requests to ■Manufacturer
? On YouTube. Instruction Manual contains …" but the flimsy Quantity written in English Version:It only contained 1pc. of paper. the Motorcycle shop on YouTube was much clearer.
?Motorcycle is a used 2011 model, so I originally planned to buy a cheap used Center Stand and install it, but there are few people who can buy the Center Stand Body at a reasonable price, but I couldn't find the SpringOthers' Included Parts:Quantity. However, I could not find many people who were selling them, and I could not find any other Included Parts:Quantity other than the Body.:I don't know where Set is sold, so in the end, even if I could buy Center StandBody for 3000-4000 yen, I had no choice but to buy it new for me, because I couldn't do anything if I couldn't get decent Included Parts:.
?? Also, there is no mention of Center Stand in the Parts catalog or anything, so it still seems that Included Parts:is hard to get, and it is hard to understand how to install it, and if Motorcycle shop can install it for about 3,000 yen, from today's experience If a motorcycle shop can install it for about 3,000 yen, I think it is cheap enough. But if they say 5,000 yen, I think it is a bit expensive.
I think it is still a great product as an ?OEM Product.
?It would be helpful if you could mention the OEM Center Stand in the Parts catalog if possible. View detail

HONDA

20 Aug 2021

Main Stand

Fits: HONDA NC750X Type LD, HONDA NC750S

Japanese Webike user

4/5

Installing it alone was a LARGER oddity than I thought it would be.

I have not attached it to the Large type motorcycle that I owned until now, and because I tried to install Center Stand for the first time in a model other than the moped, it is the impression that it is very Large strange to hang STAND. If I get used to it, I think I can manage it. The foot that hits the sole of the shoe is painful.

I tried to install it by myself, but it was very large. rubber bush is installed first with detergent in the kitchen. bead wax is also OK. there are two kinds of spring and the length is slightly different. I don't know what it means because it was NC700X TypeLD. The spring installation screw is a little narrow because it is attached to the inside of the exhaust system. largeIt is strange but you should not use the tool from the beginning. Tighten it by hand several times and then tighten it with Spanner. Put the spring on this screw and STAND first, and put the shaft with all purpose grease and fix one side. Insert the shaft with Rubber hammer as much as possible to match the hole on the other side. I used the cheapest Ratchet Type Belt Loader from Home center and pulled it to the back side using the rear wheel and Brake Disc area. If you have a Jack, it's easy to adjust the height, but I didn't have one, so I used a nearby 556 can as an underlay to prepare for breaking. If you don't have a Jack, you can use Hammer or Slotted screwdriver+Hammer. Hammer only or Slotted screwdriver+Hammer. The base of the screw is higher than the thickness of the shaft bracket, so it looks like the shaft bracket is floating a little. Be careful not to lick the hex holes. It took me about an hour to get the belt tightened, an hour from the belt to the end, a lunch break, and time to buy tools, so it took me about 4 hours. View detail

HONDA

05 Mar 2021

Main Stand

Fits: HONDA NC750X

Kevin2008

5/5

Honda original support

My model is NC750X. The brand is Honda. Honda bought the Honda original big brace, made of steel; the original car is not equipped with big brace, only diagonal brace, so if you park on a slope or maintain the chain yourself, it is very inconvenient; because of the belt The Honda NC750X with DCT function weighs 230 kilograms in a naked car. If it is full of fuel, it will exceed 240 kilograms, so the quality of the support is still very important! Believe in Honda's original workmanship and quality, I am very satisfied with the original parts purchased by ibike! In addition, you need not only strength and skill, but also some weight! I believe it is very difficult for girls to hold up. ---------------------------------------------- My car is Honda Honda NC750X brands are buying a Honda Honda factory support large, the material is made of steel; the original car is not equipped with a large brace, bracing only, so if docked at the slope or maintain their own chain inconvenient; because the band Honda Honda NC750X DCT function of bare vehicle weight 230 kg, if will fill up more than 240 kg, so the quality is still very large hold the key! I believe the original workmanship and quality Honda Honda, I am very satisfied with the original parts of the ibike buy! Also I want to hold up a large support not only need strength and skill needed some weight! If you want to believe the girls hold up a large support very difficult. Powered by Google Translator View detail