Reviews
Z900RS SE
Some parts can be removed quickly and others can't. A little expensive. View detail
For coloring around the Engine
Small but immeChainLarge Parts.
It is only a cap of M6 bolt, but I feel that the custom feeling will become even larger by setting several caps.
Gold tends to be too heavy, so I used it around the Engine area while racking my brains about this and that.
View detail
Cost-effectivenessOutclassing
We got this for the purpose of hiding the presence of Bolt, since there are many Red Mono Parts.
The problem with this type of small thing is that once you get into it, you lose the Drill. (Lol) 。
I'm sure it'll come off pretty easily." I thought it was a good idea, but it is fitted more firmly than I expected.
Just a Large size? Diameter? I felt that the NASA Type could hide the Bolt better.
View detail
For dress-up around Caliper
This is a Repeat item as I recently got into Cap Bolt Cover.
Gold is used as a color, but it would be too much like a "kudzu" if it is used all over the place, so red was chosen for this project.
It's just a Bolt cover, but it's a Bolt cover.
They say that just by fitting such a tiny object, the sense of custom increases.
However, I set the Caliper side to NASA Type, so it somehow failed. Crying 。
View detail
ImpactLarge, although not so subtle.
I ordered a Babyface Racing hook and a Silver cap bolt, which lacks a sense of unity.
Installation is done by "Giggle." It does not take much effort because all you have to do is push in the
Just be careful not to push too hard or it will float slightly.
Up close, it is obvious that Bolt is filling in the holes, but from the side, I think it gives a sense of Gold's cohesiveness. I think.
View detail
Rust prevention by preventing water accumulation in the recessed part of the bolt
[How is it used?
When it rains, water collects in the recess of the cap bolt, so I decided to cover it before it rusts.
Was the one you received as per Image?
It was just like Image.
Was the installation difficult?
Installation was super easy. I was rather careful to take it out of the package so as not to drop it.
I degreased the Bolt recess with Parts cleaner before installing it in the Bolt recess.
In order to prevent it from falling off, I applied a thin layer of Grip bond to the O-ring part of the shockproof Gel from DAYTONA that I happened to have.
How was your experience with it?
Works as per Image. It hasn't come off so far.
I chose the same black color as the Handlebar Post so it doesn't look out of place.
[Included Parts:were they on?
No. O-ring is already installed.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
It is better to degrease the recesses of the Point and hang/Bolt before installation to prevent them from falling off naturally.
Items to buy together/You don't need to buy it, but if you have Sealant or Liquid Gasket, you should apply it to the O-ring part and install it to prevent it from falling off naturally.
View detail
I installed it to Bolt of Tandem Footpeg.
I bought this to give my tasteless Bolt head a little Custom.
Because it is a Black Bolt and a Black Cap, it is difficult to understand it when seen from others, but
He is satisfied with Large, so it is good.
View detail
Cap bolt Cover
The Wrench hole in the Cap bolt is bothering me so I installed it as well as the Dress-up.
The color is Black, so it looks nice and tight.
View detail
It's not the way it's supposed to be used, but …
When I recently replaced it with an Accossat Wire Clutch Holder
The wire and lever attachment point is a Pierced-type pivot pin
Wire's ThailandCo will be in full view
I was looking for something to block up
I think you could use Cap bolt's Cover and the Pin hole diameter
When I measured it, it was 8mm, so I bought a cover for 10mm
I put it on as soon as I saw it and it was Exactly
I bought the Silver, but there are many color variations
You may purchase one to match the color of the Lever
After that, it might come off due to vibrations, so I'll use a Rubber-type adhesive
I'm thinking of fixing it
View detail
It could be a little cheaper
I've bought them many times to cover the head of One Point and Bolt
It would be great if you could make it a little easier or increase the number for the same price
It's a tighter fit than you might think, and it won't be gone before you know it
I sometimes buy them because of price adjustments
View detail
Almost satisfied
I installed it as a one point Accent around the Handlebar, good color and quality The appearance has improved in its own way and I am satisfied with it
However, I still think this gold amount is a bit high for 4 pieces, but at least make it about 700 yen I think it will be easier to buy if you give me the
View detail
If you can choose some Design face White.
With complete Bolt On, it can be installed in 20 seconds ??. Just a few more if you can choose the same color as Design, it will be more determined, View detail
Cap bolt cover
Small staff,but very useful. Not plastic,but made aluminium. Protect againts twisted dust and mud. This item shows it very much. View detail
M6 - It is purchase following M8.
Bolt 's head around Handlebar and Number - Plate somewhat concerns. (not cool?)
I have been looking forward to the Web that I'm searching for while having fun with Net, and found this part.
Attachment after purchase Instruction Manual includes (vertical) When installing it, consider the bonding method - - - Although it was stated as it is, it is installed as it is and it is in use without falling out even if it runs at 100 km / h. (It is self-responsibility - - - ).
If the price is a bit cheaper, I'd like to install it in various places, but it is the only dissatisfaction that around 4000 for around 1000 yen.
View detail
I installed it in ninja 1000
M8Bolt size ones with ninja1000's Tandem Footpeg
It attached to the root.
As impressions change only by attaching, I think that it is perfect as a handy one point decoration.
I thought that it was easier to install as it was easier to install, but after mounting it ran about 15000 km but still remains without falling out.
It can be recommended as a handy decoration.
View detail
Easy Dress-up
Easy to install, it will be a little Dress-up. However, other people are also saying, but I can not deny the sense of overcrowding. Also, let's order the size carefully. I arrived a little smaller than I thought. Although it installed in a place different from the schedule, well it is feeling that it is good with that.
View detail
LevelUp
Although I was concerned about purchasing the same POSHLicense Plate HolderSet for MT-09 before, I was wondering what it would be like Cost in 4 cups, but I made a purchase this time. I feel a sense of unity with mounting Cap. View detail
PoshCap Bolt Cover
PoshCap Bolt CoverChampagne gold
Satisfied with Cost performance.
Purchase for Bolt's Rust prevention.
Good for one point.
Recommendation.
View detail
Cap Bolt Cover
PoshCap Bolt Cover
Water accumulated in Bolt and purchased for preventing Rust
Champagne gold is very beautiful and satisfied.
Cost performance is also a good recommendation.
View detail
I like Motorcycle - - -
As well as getting on Motorcycle, I like Large as well as many things to tamper with, I often search for Big's Custom Part. We have noticed this BottleCover- when we are searching variously to purchase Number-plate Holder from Wei Big.
If you attach a Number - plate Holder, this too - - And it clicked.
It is a small part, but it became a part that I can not afford to Custom customers. In addition to M6, there seems to be M8 and M10, so I'd like to install it as needed in the future.
View detail