Reviews
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
Convenience (*^^*)
[How is it used?
For everyday use.
Was the one you received as per Image?
Yes
Was the installation difficult?
It requires a bit of hang time, but I don't think it requires a particularly high maintenance level.
How was your experience with it?
First of all, it is a passing grade!
[Included Parts:were they on?
Not particularly.
[Was there anything that disappointed you?
If I had to pick one thing, it would be the speed of Spring's Downs...
[Others]
As you can see in the other impressions, Seat jumps up at a good rate right after installation, so you need to be careful not to get punched in the face.
When Spring is up and running, the Quantity:Pair (for Left and Right) I think there is no problem since it opens to the "1" position, but it bothers me, so I put the Aluminum collar in and held it in place.
It's been 2 months since the installation and the Seat bounce is now about 45 degrees.
I don't have any problem in using it, but Spring's Downs are a bit fast... (´-ω-) woom
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
Satisfied with the cost performance
I used it for AXIS 90 I bent the gold needle of Spring to fit the seat shape as shown in the picture The plastic on the Mount side was also shaved so that the Spring can be mounted It doesn't take a lot of time and effort, but the spring's needle is hard and I had to cut the plastic to fit the spring Shaving is also Large strange for manual use, so you need a variety of tools The tools I used are as follows
1.Electric Small TypeBelt Thunder
2.Electric Disk sander
3.Tire LeverQuantity:2pc (used for spring bending)
4.Vise (used to secure the spring)
5.Cutter
In case of diversion, if you have the machining skills and tools, we will recommend this product to you
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
Fine
My best purchase, very convenient. For two years, not much has rusted, but this is nonsense. The trunk opens immediately from the turn of the key. My best purchase is very convenient. For two years, not much rusted, but this is nonsense. The trunk opens immediately from turning the key. translated by Google Translator View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
Spring was stronger than I expected (^^;)
Seat will go up as soon as the lock is unlocked
Damper was also a candidate, but Damper gets in the way and the price makes it a no-brainer I bought this one first to try it out
It's super easy to install as well, with only 3 screws
The only difference is that you can raise the Seat by hand or by itself, but it's convenient to use
It had a hook to hang a helmet on the Left Side, but I don't use it So I took it off
View detail
Fits: YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA CYGNUS X, YAMAHA CYGNUS X
It was good to purchase
Spending cheap and easy to install.
Since it takes less than 10 minutes to install, it's easy.
It is as uncomfortable to think as an OEM Product as it is using.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
KN project Kei Nikikaku : S - D 04 B Seat spring da
Used with V125G
Originally the resin joint part of Seat (Inner Box) Because it was broken
I cut out the Stainless Steel can and put the pedestal so that it will not slip.
Since I found a part of the same shape as the pedestal that I came out by chance, I saw it when I looked closely It was the spring of Spring and the strength was also the difference of muddy so it is the best for Spring purchase jumping up Spring.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
I tried using it for about a year.
Installation can be installed without any problem if Driver can be used. The use feeling is very useful. Sometimes I take another Scooter and it's natural to think that I am thinking "Why is that open?". Convenience is the strongest if you attach this to the Rear box. The only thing you need to be aware of is that if you open it on a Seat with a light thing like a smartphone or glasses, it will sink away. View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
To BW 'S 125 SEA 6 J
With this, Seat will not fall down suddenly.
I wish I could attach it sooner.
The installation was made in about 5 minutes because of the corresponding item. It is troublesome without Wrench?
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
Cospa, appearance, functionality is good.
I attached it to ADDRESS V 125S.
Drill, use Thunder, also remove Helmet in
I installed it.. It was a big thing..
of course, "125 S" It is purchase, installation, knowing that it is not conforming.
Attached is attached, but considerable time and effort
Let's prepare.
But,
There was a hard time, "Burn" And Helmet in opening
It looks convenient to use.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
This is convenient
I attached it to ADDRESS V 125S. It seems that it was made in accordance with 125 G, a little processing was necessary, but it was successfully installed.
Spring is strong and it opens with great momentum, but it seems that it will be just better if you use it for a while in other people's imprint, so use it while careful not to eat Uppercut for the time being.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
I installed it and it was Large Correct!
It is installed in V125K6.
Seat had already gone by the wind before and there was a thing that kept the key which was put on Jacket ...
At that time, I brought a Spare key from my house and managed somehow, but it was strange if this was another prefecture.
Why has not it started from the beginning?
Although it is installation, it can be installed with three Screws, it is very easy.
If the Helmet holder was also attached from the beginning, it could be installed without processing.
It is joint tightening with Left's Screw out of 3.
It is a feeling I used, but Spring's repulsive power was strongly revised.
But please be relieved.
I will be familiar with the good feeling at around 10 days.
It was nice to really buy it.
Well Big Thank you very much.
View detail