Reviews
Inexpensive but well-made product.
Purchased to make the OEM's wild Fender SMART.
I'd say it's one of the less expensive Fender Eliminator Kits.
I think the product itself is well made and looks good.
I wondered about License lamp Wiring.
Both have two wires, one red and one black, but the instruction manual for KIJIMA's wire is written to connect them in the opposite direction.
Is it some kind of diversion? If you know, I'm pretty sure they should be the same color as the OEM….
Also, the bolt used to attach the Kit to the car body is a hexagonal button bolt with a round head,
It is easy to lick, so regular Bolt is considered better.
Other than Wiring and Bolt, I think this is a great product.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Simple construction and easy installation.
Since it was coated with black gel coat, it was prepped and painted with urethane black. If I may say so, the angle of installation should be a little more upright, so it will be safer during the vehicle inspection. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Installation is easy
The price is overwhelmingly low, and since it is Black Gel Coating, I think it is supposed to be painted, but I am not particularly dissatisfied even if it is installed as is. The instruction manual is very detailed and the wiring installation is easy. View detail
Kijima rear fender eliminator
Well made but not perfectly aligned. Overall good build and quality. Love the look of the tail light. Comes with rubber grommets and bolts View detail
KIJIMA Fender Eliminator Kit
It took more than two months for delivery, probably due to Corona, but it was worth the wait.
The instruction manual was easy to understand, so even an amateur could install it rather smoothly.
View detail
Fender Eliminator installation
Installation took a bit of time, but we managed to get it installed.
The cowl on the SIDE under the Seat was difficult to remove, and that was the most difficult part.
Once installed, the Fender Eliminator is still a good parenthesis.
View detail
Somewhat so
The bracket needs to be bent when installed, and the hole for wiring under the Seat needs to be plugged, but at this price, I think it can't be helped.
The bending was done by Spanner and the wiring holes were plugged with Gum Tape.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Kit is heavy.
Material is heavy because it is iron, I would like it to be lightweight with AluminumMaterial. View detail
Maybe Large Sturdy
It is very angled but I have never been stopped by the police so probably Large sturdy. View detail
SG20J Fender Eliminator
My OEMFender was falling apart, so I decided to go with the Fender Eliminator.
Installation was easy and the Fit was perfect.
Refreshing to look at, but you might want to lower the Number a bit?
View detail
SR400 Rear Fender Eliminator
Good quality, fits my 2015 SR400 very well. The gel coat finish was good enough to use as is and I like the lines on the bike better now. Hardware included was good quality as well. This is the best short fender out there for cost and function. I did remove the supplied brake light and used a round one. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Looks good!
All of our motorcycles were registered before September 30, 2021.
The refreshing feeling around the Tail and the angle of the Number are unquestionably good for the Parenthesis, and the wiring is also stored in the Kit, so the Reverse side is not full of roughness.
However, it seems that the angle of License Plate Light becomes NG when OEM License Lamp is used as it is, and it doesn't pass the vehicle inspection though it is said that it is possible to use OEM License Lamp as it is.
View detail
KIJIMA
The details of the rear come to life. That's so cool. I think I did a good job. The more you look at it, the more beautiful it is. Sell a lot. good~ View detail
No installation problems
If you have your own Level tools (hexagon, extension, driver) and vinyls, you can install it. The work time is enough for 1 hour.
If you put the vinyls on the License Plate LightWiring, it will be safe even in the rainy days.If you pay attention to the center of the Number installation, it looks Refreshing and there is no noise.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
KIJIMANumberless
I just wanted to add a word that the car may not pass inspection due to the new Number Law. View detail
Fits: HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR125R, HONDA CBR125R
SS-like around Rear.
This is the first part that was installed on the delivered Toki along with the LED Tail.
I chose HURRICANE from webike because I heard that KITACO's body is made of FRP, and I wanted to use steel that won't be damaged by single vibration; Crying 。
I chose KIJIMA as the next best.
The installation was a little difficult because the Instruction Manual was written for the previous year.
Personally, I'd be 100% happy with Refreshing if it didn't have the Black tongue-like area under the Tail lamp……
I'd say 65% satisfaction.
View detail
The Rear area has been Refreshingly improved, but …
The rear area is refreshing and it is recommended for the first custom. The clearance of the screw between the tail lamp and the license light is very narrow, so you need to be careful when you wash your car. I put a protective film on the tail lens to prevent scratches. View detail
Not bad but not perfect
Personally, I feel that the Z900RS still does not have a rear fender, so it looks more vigorous, so I chose this kit. The installation is simple and the workmanship looks good, which is an advantage. There are two imperfections: the first is that the threading hole on the top plate of this kit is a bit big. If the water pavement is not treated, there will be muddy water under the seat. Finally, I use cloth tape to solve the problem. . Then there is the screw hole position that cannot meet the Chinese standard license plate. It would be nice if the screw hole can be expanded to both sides. ---------------------------------------------- Personal aesthetics, I think the Z900RS car or no rear fender looks more spiritual, so I chose this kit. Easy to install, good workmanship, which is the advantage. There are two imperfections: first of all, the top plate of this kit is slightly larger than the threaded holes, if not treated with water on the road will be splashed under the seat is full of mud and water, and finally I used cloth-based tape to solve the problem. Then is the screw holes can not meet the Chinese specifications of the license plate, if the screw holes can be expanded a little to both sides would be good. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Fender Eliminator Kit installed
[How is it used?
installed
Was the one you received as per Image?
It was heavier than I thought.
Was the installation difficult?
Large sturdy even for beginners
How was your experience with it?
I think that it is cool.
[Included Parts:were they on?
KIJIMA's Sticker
[Was there anything that disappointed you?
nothing special
Installation Instruction Manual is also available.
You'll need a fair amount of tools, though.
You can also find them at the 100 yen shop.
It takes about 2 hours to complete the work.
View detail
Refreshing.
It looks Refreshing and great.
The angle is standing up a little too much, so I'm engaging something that can adjust the DAYTONA angle.
View detail