Reviews
Threateningly low price
I think that this low price with Tail Lamp is a threat.
At first, I liked the wild feeling of the Tail Lamp of NORMAL, but when I changed it, this one is Refreshing and good.
View detail
Installed on KLX
Matching is good because it is designed for each car model.
If I say in detail, the position of the screw hole of the installation has some gap, so I think that some Skill is necessary for the installation ….
So much satisfaction for all that hard work!
View detail
Fits: HONDA XR50 MOTARD, HONDA XR400 Motard, HONDA XR250, HONDA XR100 MOTARD, HONDA XR250MOTARD
In FTR223
I used it on my FTR223.
Installation is the Bolt of three places, but some ingenuity is necessary because the mounting surface of FTR is different from XR etc.
I did not use the Blinker Bracket that came with it, but prepared it separately.
It was a Bracket for STD Blinker and it didn't look good.
You may have a preference for how it looks, but I personally think it's about the best.
If you want to make it feel like a high technology, you can use LED Tail&Blinker.
View detail
Fits: HONDA XR50 MOTARD, HONDA XR400 Motard, HONDA XR250, HONDA XR100 MOTARD, HONDA XR250MOTARD
Fender Eliminator is the basis of Custom
I use it to make my xr100MOTARD look like a light MOTARD View detail
Fits: HONDA XR50 MOTARD, HONDA XR400 Motard, HONDA XR250, HONDA XR100 MOTARD, HONDA XR250MOTARD
I'll buy it for 1,000 yen more if it comes with Reflector.
I used it for XR250MOTARD and MUGEN limited edition car. This is a Small TypeTail lamp with integrated license plate light, so it's light weight and SMART in appearance. View detail
I can't follow the instruction manual.
I followed the instruction manual and the mounting holes didn't quite fit.
When the screw hole is matched with Gap and screw hole, it is not possible to hook the screw hole when it is hooked though the Rear side is hooked with the screw stopper.
I thought the price was cheap and the design was good, but the accuracy was poor.
View detail
Good
i installed it on klx250
The difficulty level is normal, I think you can install it in about 2 hours even if you take it easy
Rather, I thought it would be strange to remove Cowl and Blinker, and put them back on, but I thought it was Large I think
In terms of accuracy, it's about as good as it gets It's good for people who want to make a cheap Fender Eliminator
Now you can prepare a reflector separately
View detail
Fits: HONDA XR50 MOTARD, HONDA XR400 Motard, HONDA XR250, HONDA XR100 MOTARD, HONDA XR250MOTARD
Divertible
It is for XR 250, but it was installed in XR 230.
You can use OEMBlinker as it is, Cost performance is also good.
Reflector will be installed in the future.
View detail
It is suitable for the price, but it is difficult for beginners
There are plate thickness of Bracket, BALI is also small, I can evaluate the point that OEM Parts can divert
Anyway I could not understand the Instruction Manual
Especially when building around Blinker according to Instruction Manual the tool does not enter Level
In addition, just by installing Blinker's Bracket why I am using Bolt With Hexagon Hole
Those who own only Spanner and Driver will run into hurry to the Home center
Also, Reflector necessary for regulations is not attached
It was troublesome to have to purchase separately
"If you buy this kit you can easily do Fender Eliminator" If you like it
It was a product that there was a feeling that hands could not reach it where it is itchy
View detail
LampLarge The angle, Number is exactly right.
I was studying things of Slim type in the LED, but I chose this by being able to deal with Simple by using License Plate Light, and by exchanging spheres when it is burned out.
Currently I am putting LED Bulb.
As car model exclusive Connector is attached, installation is very easy.
It is necessary to attach a reflector separately.
Lamp's Largeness is exactly good feeling, I also like the angle of Number.
With Normal muffler, the exhaust gets soaked on Number and it soothes, but it is not a big problem.
View detail
Of course it can be used for KLX 250. Steel's secure sense of Fender Eliminator Kit
KLX250 (08-) Attached to.
I have written other people, but because I use OEMFender's Bush and Screw, the only remaining is OEM Tail lamp and Fender.
It was the cheapest in the Fender Eliminator Kit that seems to be used for KLX 250, so I decided to do it, but it was correct.
The part to be attached to the car body is made of Steel, and there is also a sense of security even in the Fender part, which is a fragile part transmitted with vibration.
The position of Kit, License Plate of this kind changes, the exhaust gas starts to hit and it hits, the License Plate becomes dirty from the back.
It may be safe to change the Screw of the License Plate to a slacky one.
View detail
Easy installation!
I purchased it because I wanted to change Rear's slimy feeling. Although it was inexpensive, the thickness of Plate was sufficient and it was making firmly. It was possible to customize the installation in a short time with two Bolt and Coupler connections. After running for about 200 kilometers, we have tightened each part again. Since there is no Reflector, I have to purchase additional, but I am satisfied.
View detail
D Tiger X
Instruction Manual was polite and there was nothing to get caught in,. The installation time was around the Large body 1 h less.
Parenthesis better than OEMRear Fender! I can not run on a rainy day lol ...
Also, the exhaust sound has changed! The exhaust of Exhaust System hits the License Plate and seems to make a loud noise. By the way it is OEMExhaust System. People who care about it should be exchanged with the Exhaust System. It was a pleasant miscalculation because I like this sound quite a lot.
View detail
It attached with KLX125. A price is also cheaper than the fender less kit of the other company, and recommended. Although it was with the object for the D truckers 125, it has attached also with KLX125 satisfactorily. Since the attachment has
It attached with KLX125.
A price is also cheaper than the fender less kit of the other company, and recommended.
Although it was with the object for the D truckers 125, it has attached also with KLX125 satisfactorily.
Since the attachment has probably stopped with two bolts, it may be correspondence of only D trucker in reinforcement.
Attachment can also be attached in about 20 minutes, and the intelligible description is also attached and I think that beginners can also attach easily since wiring is also coupler on without processing.
View detail
Since an authentic positive one was rugged and it was large, when using this, it became sharp touch shapely. It is a difficulty that a reflector and a two-sort sticker do not simply follow! There is no space which sticks the stay which moreover attach
Since an authentic positive one was rugged and it was large, when using this, it became sharp touch shapely.
It is a difficulty that a reflector and a two-sort sticker do not simply follow! There is no space which sticks the stay which moreover attaches a reflector, and a two-sort sticker.
That much [ although it is very pleasing / supposing it mentions the factor of a four-stars stop ].
View detail