Reviews
Useful if you have it ^^.
[How is it used?
When you stop at Convenience or some other place where you stop for a bit.
Was the one you received as per Image?
Large Image Street
How was your experience with it?
It did not go into the CYGNUS Hell Lock pin as is.
[Points to note]
The pin holes are unexpectedly small, so some modifications may be necessary depending on the vehicle.
How did it compare to other products?
No comparison
Other items that would be helpful
As a side note, the included Carabiner is too small.
The 100 yen shop items of today are of higher quality.
View detail
easy to wear
I used KIJIMAHelmet Lock Assist on my Honda TACTA-AF09 and it is very easy to use! The color of the lock assist is beautiful even when installed on a motorcycle. View detail
Hard to use.
My helmet is SHOEI's X-Fourteen and it is hard to wear. The warning also says "…" for SHOEI's Small D Ring, but I am not sure how long it will last. Smaller than a small lion." It is not stated whether it is possible to install the "A" or "B", but it is difficult to do so. This is also due to a lack of confirmation on my part. There is no problem with installation on the body side.
And this product itself has no Lock Function. It is just a hook. I think this should be mentioned in the product description.
View detail
Color is Beauty
My wife and I had a hard time mounting two Full faces on one Helmet holder when we Tandem with her.
If you have this, you will have no trouble!
View detail
Savior of OEMHolder
When trying to hook a full face to an OEM helmet holder, it is often more difficult than expected due to the lack of the perfect length.
Especially, iron CUBs have a holder on the rear brake pedal side, so if the Exhaust System Up Type is installed, it may cause a problem if it is hooked up properly due to heat concerns.
The product in question is designed to be threaded through the D Ring of the helmet and secured to the helmet holder with a hole in the upper part, so that the helmet can be easily and safely hooked on the holder.
When not in use, the included Carabiner can be used as a key holder, eliminating the need to worry about storage space.
No need to add an external Holder to the Handlebaretc., so there will be no need to add more keys.
It is a simple and easy product, but I think it is a wonderful product that has caught the blind spot of an idea.
This is the second time I have purchased this product. The product I purchased almost 10 years ago was not damaged, and since it was purchased in conjunction with the increase in the number of vehicles, I believe it is durable enough.
View detail
Easy to use
Loading the Pannier case makes it difficult to hang the Helmet on the Holder, but it can be easily locked.
In the case of crf250l, the Holder seems to pop out to the side due to its shape, but it eliminates interference with the Body and makes it easier to remove.
View detail
Be careful if you are using SHOEI's Helmet!
The product itself is great, but I couldn't use it on my SHOEI GT-AIR2….
Sad….
Well, it can be used for other helmets, so it's OK. (Lol)
View detail
Yamaha Bolt wanted to use Helmet lock without relocating it.
I wanted to use the Yamaha Bolt and NORMAL Helmet lock without relocating it, and at first I was trickily hooking the Helmet with Wire, but the thin Wire cable was squishy and difficult to hook, so I purchased this Lock Assist.
YamahaBolt Helmet lock position (NORMAL) is originally deep and far away.
I installed a tool bag on the Left Side, which makes the NORMAL Helmet lock even more difficult to use.
When the helmet lock is moved, the coupler of the wire harness needs to be detached. (Maybe.) 。
The only point that is difficult to handle is the Motorcycle side lock bracket. (The one that pops open with Unlock) There is a groove at the tip of the (It's a groove for locking, so it can't be helped.) The slot of this lock gold is caught in the hole of the narrower end of this assist, and it is sometimes difficult to remove it.
Since the YamahaBolt's Normal muffler is a single Right Side muffler, I don't think there is any concern about Exhaust System heat when the Helmet is hung on the Left Side lock. Also, when using this assist, Clearance from the ground to the Helmet is not a problem.
As mentioned in Manufacturer's comment, the D Ring of Small size has this Assist (the thin one) The tip does not go in.
I use it by crouching down and lifting and hooking this locking Assist from the bottom up.
This lock assist solved my problem. Costa rica's best !!!!
View detail
Good texture, but no longer used.
I purchased this helmet holder because it was difficult to attach a helmet to the helmet holder I had purchased. The quality is good, but it is still a hassle to take it out every time and use it, so I started to hang my helmet without helmet lockAssist even if it is a little bit difficult to put it on. View detail
Must-have products
I bought it because I put a bag on my Tandem Footpeg and it was hard to hang it on the helmet lock.
It is very easy and convenient to use and I am glad I bought it and recommend it to everyone I know.
I have left it on for about 10 months since I bought it and the color has not faded much and there are no problems with the quality at all.
The color also matches my Motorcycle.
View detail
For CUB
I bought this because the Ring of the Helmet does not reach the Helmet holder of the CUB. It is very inconvenient without it. I wish they would make it easier to use from the beginning. View detail
I haven't used it yet, but …
You can use it.
Light and Compact
Looks like it will do a good job.
View detail
To prevent theft.
It solves the problem that the OEMHelmet lock is not available due to the installation of the Rear Carrier on the SEROW.
Theft of helmets is a serious problem that needs to be addressed.
View detail
Easier to install
I bought it because it is difficult to install the helmet holder of CRF. View detail
Image Street (*´∀*)
[How is it used?
It is for daily use from city driving to Touring.
Was the one you received as per Image?
It was just like the image.
How was your experience with it?
Yes, it is easy to hang Helmet. (Translated; ω ´) b
I had to do the Helmet lock by Pushinga Pushinga Pushinga the D Ring many times, but it is completely solved.
It even came with a Carabiner for transport, so well thought out!
Carabiner also has a good price so it's a good value! (*´∀*)
The holes on the Motorcycle side are too small, so it would be better if they were a little larger.
[Points to note]
I have to make sure that I don't wound my Motorcycle or Others when I carry it around.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Is this convenient?
The CRF250L helmet lock has a pin that slides out and has no depth, so I felt stress every time I tried to hook the D Ring. I was not expecting much, but I bought it and it is great! It is easy to hook up and it keeps the distance between the body and the helmet, so it is hard for the Wound to get on. I think this is a good buy. View detail
In use at JA60CROSS CUB
[How is it used?
Helmet lock on JA60CROSS CUB is used because it is difficult to use.
I was able to use it on ARAI-VCROSS?, ARAI-Tour cross3, and SHOEI-VFX-WR without any problem.
Was the one you received as per Image?
Yes. As shown in the photo.
Was the installation difficult?
It's easy, as long as you get the size right, Large is sturdy.
How was your experience with it?
As expected
[Included Parts:were they on?
Yes.
View detail
KIJIMA Helmet Lock Assist
I was looking for a helmet holder for my CROSS CUB that was difficult to use and found KIJIMA's Helmet Lock Assist and bought it.
It was easy to use and saved a lot of time in locking the Helmet.
I gave it 4 stars because I wish there were more color variations.
View detail
KIJIMA Helmet Lock Assist
I found this part at KIJIMA and bought it when I was having a hard time using the helmet holder of the CUB, and the full face helmetetc. was hard to hook up. I found this part at KIJIMA and bought it. It is very useful and easy to use.
I gave the Carabiner 4 stars for texture because it was cheap.
View detail
I thought it would be easier to use.
Recently, helmets have become more expensive, and I sometimes hear about thefts, so I have started using a helmet lock when I park somewhere. However, I was feeling stress every time I put on my helmet, so I thought this product would be good and bought it.
The length is not that long, so it is convenient for carrying, but I don't feel that it is dramatically easier to use. In Included Parts:, Small Carabiner is set to "Quantity".:Set, but the rotating part rattled quickly.
View detail