Reviews
Fits: Others Medium size car and over (126cc-)
I was looking for something inconspicuous and well
It does not protrude from the License Plate and the bottom part is held in place by claws with no jiggle. The entire surface is black and the backside reflecting and the angle of the reflector is fine.
However, the price is a bit expensive.
View detail
Fits: Others Medium size car and over (126cc-)
make an attractive appearance
I bought this with the introduction of Fender Eliminator.
If you use the Fender Eliminator, you can see the Reverse side of the Number.
If you use this, you can kill two birds with one stone because it looks much better and it has Reflector.
Material is not resin, but Material:It is aluminum and has a little weight to it.
The Fit feeling is also good and I recommend it.
View detail
Fits: Others Medium size car and over (126cc-)
The large size of the Reflector is not too large and looks good.
Simultaneous installation with Fender Eliminator made by HURRICANE.
I bought this one compared to the Reflector only product, and it looks good from the Reverse side, and I'm glad that the back of the Number is covered so it doesn't get dirty along with the strength.
Even the NORMAL Fender was covered in mud behind the Number, so it will be easy to wash and clean the car.
Reflector is not so good at attaching Double-sided Tape, but I think it's large and strong because 3M is quite firm.
View detail
Fits: Others Medium size car and over (126cc-)
Number base、Reflector
Size is perfect, no problem at all! View detail
Fits: Others Medium size car and over (126cc-)
Fender Eliminator Kit and Quantity:Set
The base plate is not heavy, and there is a nail to fix the license plate with a good thickness, and I think that it is a solid making for the price. The Base Plate is not heavy, and it is a good thickness. The base plate is not heavy and has a good thickness. View detail
Fits: Others Medium size car and over (126cc-)
It is not cosy, but it is safe to have.
I bought it on the occasion of converting my '14 MC41 CBR250R late model to Fender Eliminator.
The Fender Eliminator does not come with a reflector, so I chose this one.
I compared and examined with Active's Slim type Reflector of the number co-closing type, but I decided to buy this product also to reinforce the license plate which becomes bare by making it into Fender Eliminator.
The content of the packing is only Reflector of Number base and Paste Type. This price is just this …hmmm ….
But it is light and sturdy, and the texture is good and the anodized is applied beautifully.
As raised in the image, the interval between the Number base and the fixed claw is too narrow and the raised part of the edge of the Number does not enter at all. Moreover, Quantity:Pair (for Left and Right) And.
In case you're wondering, the Number was re-registered late last year and is still a beauty with no freshly made distortions whatsoever.
If I forced it in, the Number was going to be deformed, so I agitated the claws while paying close attention to the anodized peel and looking for the best position where the Number can be fixed and not rattle.
The position of the Reflector can be pasted to the top and bottom because there is room, but I wanted a sense of unity with the Number, so I pasted it to the RLimit of the upper bend part.
Once the position of the Reflector is decided, carefully pull the peeled paper downward while holding the Reflector so that it does not gap.
I installed it with that in mind, and it looks very GOOD.
Up and down Quantity:Pair (for Left and Right) Because both plates are exposed about 1mm more than the License Plate edge, it makes the Number seem to be high class.
Incidentally, for the above reason, Quantity:Pair (for Left and Right) NumberSIDEBlinkerCompact of the Active manufacture which was anxious whether it interfered and could be used together was possible to be used together without interference.
Personally, I'm not dissatisfied with it, but I think it would be more stylish if the Reflector mounting part was the same size as the Reflector. It's a bit expensive.
Well, I think it's unavoidable because I think the Base part is used with other Reflector size products, but…
Also, the aforementioned claw problem. If it is a cheap price, I think it is unavoidable, but if it is this price, I want it to be done properly.
If you're worried about tripping and bending the Number with the Fender Eliminator, buy this one for the Reflector as well!
View detail
Fits: Others Medium size car and over (126cc-)
It's pretty solid.
I bought it as a Fender Eliminator because the back of the Number stands out and it looks cheap, and also because it's a countermeasure against vibration-induced freakiness.
Good thing you can put Reflector with it too!
View detail
Fits: Others Medium size car and over (126cc-)
Almost satisfied
When you throw in the HURRICANE Fender Eliminator Kit, you can use it separately I bought this product because I needed to procure a Reflector
The workmanship is beautiful and the price is low, so I can't see any bad points If I had to choose, I would say that the Reflector is not bolted on, but double-sided It is the point that it is fixed with tape, but there is no peeling, etc. after mounting, and there is no problem, so it is generally I think it's something I can recommend
View detail
Fits: Others Medium size car and over (126cc-)
perfectly
It was purchased at the same time as the Made by HURRICANE Fender Eliminator Kit
I am satisfied with the color, texture and shape of the product
It takes some courage to position the Reflector, but other than that I think it has no flaws at all It is
It's a solid product, so it may also be a countermeasure against Number cracking due to vibration Yes
I highly recommend it, and I recommend buying it with the Fender Eliminator Kit It is
View detail
Fits: Others Medium size car and over (126cc-)
Dress-up and Japanese Vehicle Inspection Correspondence
It's a recycle of the one I had on my old motorcycle
When I bought the vehicle used, it didn't come with an OEM reflector Japanese Vehicle Inspection Correspondence is also considered I put it on
It protects the License Plate, and it doesn't weigh a lot, so it's a good thing It's just that
If I wanted to, I would say that the reflector shape is different for the same made by HURRICANE (the width is HA5793 (narrower and taller) seems to fit the atmosphere of the old car better, but reuse of surplus So it's inevitable
View detail
Fits: Others Medium size car and over (126cc-)
Good
Crack in the License Plate, and it's a bit pricey for reinforcement and protection I was worried about how expensive it would be, but I bought this product Originally, I didn't have a Reflector and the License Plate was already warped by vibration I wanted a product with Reflector and a claw at the bottom, so I went with this one 。 (This was the only option.)
As for use, I think it's good for reducing vibration
I don't particularly care for the fact that the Reflector is self-service, but I'm a little worried that I'll be able to get it one day
View detail
Fits: Others Medium size car and over (126cc-)
It's neither good nor bad
I bought it to install a Fender Eliminator I think that there is no large difference between the price and the build etc. with other Manufacturer's ones However, I am a little anxious about the fact that the Reflector is a double-sided tape Nah View detail
Fits: Others Medium size car and over (126cc-)
Things are good, but the price is too high
After installing the Fender Eliminator Kit, it's an essential thing to have
I bought it with the Fender Eliminator Kit from HURRICANE
When you set the Fender Eliminator, the foot and other parts of the license plate are unexpectedly missing
It can get caught and bent
This product is very good at preventing such trouble
I think it's good
However, the reflective light has to be attached by yourself with double-sided tape, and the
It's surprisingly messy
It's a pretty good price, but I'm just saying that you should stick it on Manufacturer from the start
I think
View detail
Fits: Others Medium size car and over (126cc-)
It is slightly expensive, but ...
As we are attaching the Rear Fender Eliminator Kit with Off-road motorcycle
Gravel and mud come straight on the License Plate.
Indentations such as numbers disturb and cleaning is not easy either.
I did not turn down and bend, but I think that I will fold someday
I searched for something, I arrived at this product.
It is not related to running, not too much concern such as number back
However, as it is a License Plate that seems to bend only a bit caught
There is no loss when attached.
However ? ? ? It is slightly expensive.
View detail
Fits: Others Medium size car and over (126cc-)
Good stuff
The circumference of the License Plate and the claws hanging on the Plate were also accurate and there was not Wobble,
Label of product is pasted with SEROWTape and glue sticky ...
Since there are times when it is discolored even with Parts cleaner as part of this hand
I wanted you to care more about packing a little more ...
And if you paste it with Reflector yourself, I want you to make it a little cheaper
View detail
Fits: Others Medium size car and over (126cc-)
It is a good companion of Fender Eliminator Kit
After installing the Fender Eliminator Kit in Motorcycle, I was in trouble because Reflector could not be attached. Because the License Plate is barely exposed, it seems that Number base and Reflector searched for merchandise, so I found this item. Actually wearing it was as per the image of mine. As in many people's reviews, there are points that the board thickness is thin, not so much weight increase, the number of Hooks to fix Number, Size of base is Large ridge point, Reflector is SM View detail
Fits: Others Medium size car and over (126cc-)
I wanted to say like this is satisfactory.
Reflector is necessary when it is made to the outside Fender Eliminator, but if Reflector only it is concerned about the dirty and broken License Plate, but because this product is an excellent item that can be eliminated at once, it is said to be a very excellent product think. View detail
Fits: Others Medium size car and over (126cc-)
It is an essential item of Fender Eliminator
I made ZEPHYR 750 as Fender Eliminator and I was only using the T-shaped Reflector at the beginning but I bought this product due to the runout of the License Plate due to vibration during running and the dirt is so bad. Since this product also serves as Reflector, the T shape that we used stopped Reflector and installed it. It's a solid product and paint condition. The vibration caused by the intended vibration also disappears and the mudguard effect is also perfect. Reflector installs an elongated Reflector for Design View detail
Fits: Others Medium size car and over (126cc-)
If you are concerned about the dirt on the back of the License Plate!
Purchased with Fender Eliminator Kit installation.
When I installed the Fender Eliminator Kit, I purchased this item because the back of Number is visible..
The dirt became inconspicuous and the car wash became easier
There is also a nail that fixes Number under Plate, so there is no beating sound even if it runs.
I feel dissatisfied with the attached Reflector shovel
I think that it may be a little bigger
It is too cool between Number and Reflector.
I think that surprising is good.
View detail
Fits: Others Medium size car and over (126cc-)
Light than a certain product
At first, I used KIJIMA's License Plate Base, but Material : Aluminum, but with a considerable weight feeling, vibration was intense with Number unless you used Double - sided Tape etc between License Plate and Base for installation.
With Reflector I never knew that there was something I did not know because I purchased it, but I have been using it unfortunately, but I can not stand the adhesion of License Plate anyhow, buy it here.
Compared to KIJIMA, the thickness of Plate itself is thin and it is really light.
In any case, there is a nail that receives the lower part of the License Plate, and it firmly adheres. Especially Large seems to be durable without measures against vibration.
A double-sided tape is affixed to the attached Reflector, and it will be attached to Base by oneself.
Because it is thinner than KIJIMA, folding etc.. I am worried, but I think that it is stronger than License Plate, so it is acceptable range. Number Unevenness on the back has decreased, it is refreshing and cleaning is easy.
I wish it was a bit cheaper ...
View detail