Reviews
Attachment feeling
Frankly, I don't see much effect.
I guess it's like an apparent Attachment.
View detail
Windproof performance Up
As shown in the Title, the height has been increased compared to the OEMScreen, and the windproof performance has clearly improved.
[Color] I think the Smoke color makes the Parenthesis look tighter and more attractive. The visibility is not a problem during the daytime, but when driving at high speeds at night, please be careful of the visibility through the screen.
Installation is very easy as all you have to do is remove the OEM Bolt and secure it with the included push rivet.
View detail
Fits: HONDA CB1000R, HONDA CB1100, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Solid impression
I chose this one because I like TSR and I don't like more colors. it is not as flashy as Color Anodized Aluminum, but it has a solid look that I like. The texture is also good.
It seems to be slightly heavier than the OEM, but not enough to realize the effect of vibration reduction.
Installation is really easy, just remove and replace. If you do not have it, please be careful.
View detail
I chose TSR because I like it.
I chose it because I like TSR and it is much more affordable than HRC's. The size is S and it is Exactly.
I chose Black, and I think it was the right choice because the Handlebar area looks tighter.
I would like to Repeat it when it deteriorates.
View detail
Fits: HONDA CB1000R, HONDA CB1100, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Cb400 handle bar ends
Excellent quality but it needs the proper fittings in the handlebar for it to attach. Make sure you have the right fittings for the handlebars View detail
Fast and effective Large
I bought it for dress-up purposes and did not expect the wind regulating effect.
I drove about 150 km on the highway the day after installation and felt almost no wind roll in at the speed limit.
The wind control effect is surprisingly good even on the 120km section of the Tomei Expressway.
(When the height of the Scooleyn is set to the Largeest)
What I'm concerned about [Color] The Smoke is so thick that it is difficult to see the road surface when driving at night if the Screen height is raised.
I chose it for its looks, so I will run with that in mind.
View detail
Fee Rings a little better.
You can feel it not only in Circuit but also in Winding. Dress-up of such a small part is also quite cool. Installation is easy and even beginners can do it. View detail
CBRTe600RRTechnicalSportsRacing fenderless
Tail area is nice and Refreshing.
Unfortunately, Silencer's heat shield is fully visible, so a little modification may be necessary.
I am also a little concerned about the angle of the Number because of the car inspection.
The installation of the system can be done with confidence thanks to a detailed Instruction Manual.
The relocation of the Rubber portion of the Blinker may require a bit of hang.
View detail
The price is high, but worth it.
[How is it used?
It is installed on a 2020 CBR1000RR-R.
Was the one you received as per Image?
It is exactly as shown in the Image. There is no strange distortion, and the woven part of Carbon (?) is also very nicely done.
The price is quite a good price, but the quality is commensurate with the price.
Was the installation difficult?
It was not difficult but slightly cumbersome.
The OEM also has something like a very short Rear Fender, but it is fixed to the inside of the Swing Arm with a Bolt. It is a little troublesome to replace it because of its poor location and inaccessibility.
How was your experience with it?
It's a big difference without it. It is very sporty.
We don't run in the rain, so it is unclear if it is effective in bouncing in the rain.
[Included Parts:were they on?
It is not diverted from the OEM Bolt or anything like that, but comes with it securely.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
without discomfort
We first considered it, but ended up installing something else.
Rear Sets were a necessity because I am not good at Scooter-like Positioning in any way.
This product I purchased was better suited for me than the previous Type.
I felt that the sole and heel pinching could be done without any discomfort with the previous Motorcycle.
I am satisfied with the quality of the product.
View detail
poor in cost performance
The screen itself is cheap, thin and small compared to OEM products.
Also, like MRA, the Rubber stop that covers the Screen tip is not attached neatly because it is fastened with adhesive.
View detail
The claw on the tip broke off during installation.
The claws on the tip of the device are broken as shown in the picture, even though all you have to do is to finger-load the 3 claws and attach 4 screws on the tip. The reason why I asked for the spec. is because I applied for a return request as a defective product, but received no response and asked me to write an imprementation. I am disappointed that I got the worst product. View detail
Installation on nc42 late model
Installed on nc42 late model.
The design is Parenthesis good, and I have a TSR full titanium muffler on it, so I decided to go with TSR for the Radiator core guard as well.
Installation can be done by anyone, as the work itself can be done by removing four hexagonal screws.
It is well made and I am satisfied.
View detail
Fits: Others , HONDA CB400SB, HONDA CB400SB, HONDA CB400SF, HONDA CBR600RR, HONDA CB400SF, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR-R
For Dress-up & Wiring
I wanted to Wiring to run Circuit, but TSR was cheaper than HondaOEM, so I bought this one. I bought this one because TSR is cheaper than HondaOEM. View detail
For Brake fluid tank protection
Size is perfect
Since it is a TSR, the color must be Blue.
View detail
GB350CABTON Exhaust System
The design is good, the exhaust sound is moderate, and you will not get tired even if you are touring. View detail
OEM-like Style
Although it was listed as a '21 model, it can be installed on a '23 GB350S without any problems.
The design of the guard is more OEM-like than other companies' under guards, so it does not feel like an afterthought, and the guard itself is thicker and has a wider cover range than the OEM Under Guard on India's Hynes CB350.
The oil can be replaced as it is, but since the guard is designed to avoid the area near the drain, access to the drain bolt is slightly more troublesome than when the bolt is not installed.
Although the price is a little high, the quality of the Under Guard is so high that it can be said that this is the only choice for recommendation.
View detail
I wanted a Black Anodized Aluminum footpeg.
Installation was done at Motorcycle shop.
Since the frame is Black, I wanted a Black footpeg.
As expected of TSR, the texture and comfort are, needless to say, superb.
Also, the subtle angle of the normal step, which forced me to do the inner thigh (some say it was due to the knee grip), has been eliminated, making step work easier.
View detail
Parenthesis or because I bought it.
I bought this because I had TSR footpeg in and wanted to put Sticker on it as well.
I like Sticker, which has a somewhat retro feel to it!
View detail
real carbon
Hello everyone, this is a good product and I recommend it to everyone. This is 100% original, you can buy with confidence. also easy to install more light and real carbon View detail