Reviews
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
You can't use the ZX-4RR in the up direction!
I used it to raise 2cm on ZX-4RR, but Link Rod length is 150mm, 10mm shorter than 25R, so it can't be used for raising direction. 25R is 160mm, so it can raise ±10mm=±2cm within 150mm~170mm range, but 4RR can only be used for lowering direction. Please note that 4RR can only be used in the downward direction! View detail
RnineTHandlebar replacement
We chose Silver because we wanted the same color as the OEM.
Position has become easier and more enjoyable to ride.
View detail
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
Can be raised or lowered freely
I had previously raised the ride height of my 25R with BEET's SportsLINK, but I couldn't stand the gold or silver-colored parts that stood out, so I looked for a product that was less conspicuous and more functional.
Installation is easy if you have a Rear Stand and Jack. However, it is difficult to adjust the plate under the weight of the car because of the narrow space, and it is difficult to turn the plate with Spanner, so it would be easier to turn the plate with Jacketc. There is an adjustment allowance of 2cm up and down, so considering the time and effort required to replace the plate, I think this is a good product.
View detail
Fits: DUCATI Multistrada 1200, DUCATI STREETFIGHTER, DUCATI 1098, DUCATI 1198, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI DIAVEL, DUCATI Monster 1200, DUCATI Monster 1200R, DUCATI Multistrada 1260, DUCATI PANIGALE V4
Cannot be installed even though the car model is compatible.
The product cannot be installed even though it is compatible with the car model, and it just won't fit.
AELLA's other products also have high product prices but poor accuracy.
Future purchases are a consideration.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS cafe, KAWASAKI Z650RS
Simple is fine.
The calm design has a great visual effect!
It is easy to install and I recommend it.
View detail
Fits: BMW R1200RT, BMW R1200RS, BMW R1250RT, BMW R1250R, BMW R1250RS, BMW R1250GSA, BMW R1250GS, BMW R1200R, BMW R1200GSA, BMW R1200GS
self-satisfaction
I bought this lever for my R1200R. I was looking for a lever that wouldn't break when I stand on the ground, and I found this lever. I think it's good to leave the work to the shop because I can't press-fit without a tool. View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Caliper seems to drag less ….
There will be a slight impact on the push/pull of vehicles.
I feel that the Chassisisis sound when pushing the vehicle has become a little quieter and the resistance I was feeling has become lighter.
I thought the product was satisfactory to the extent that I felt it was.
View detail
I like White with a subtle Pearl.
I don't have any special impression on the sticker (laugh), but I bought it with my extra points simply because I am an AELLA fan and it is useless for non-AELLA fans (laugh). I don't like to put Stickers on my products too much, but I think Transfer Stickers with simple and small letters only are acceptable for me personally.
I had no expectations because it was just a Sticker, but when I saw the actual product. Nice job, AELLA! I'm going to put it casually in an inconspicuous place on my second son's 959 Panigale, which is full of AELLAParts.
View detail
Fits: DUCATI XDiavel, DUCATI SUPER BIKE 1299 Panigale, DUCATI DIAVEL, DUCATI StreetFighterV4, DUCATI SUPER BIKE PanigaleV2, DUCATI SUPER BIKE PanigaleV4R, DUCATI SUPER BIKE PanigaleV4, TRIUMPH Supersports Daytona 675, DUCATI SPORT TOURING ST2, DUCATI SPORT TOURING ST3, DUCATI SPORT TOURING ST4, DUCATI SUPER SPORT 900 SS, DUCATI SUPER SPORT 800, DUCATI SUPER SPORT 1000, DUCATI SCRAMBLER Sixty 2, DUCATI SCRAMBLER 800, DUCATI MULTISTRADA 1200, DUCATI SUPER BIKE 748, DUCATI SUPER BIKE 916, DUCATI SUPER BIKE 996
Unify Slider with AELLA
[How is it used?
Used for city driving and touring.
Was the one you received as per Image?
AELLA's Frame Slider, Front Axle Slider, and Rear Axle Slider had been installed in the past, and the design and texture are exactly the same, giving a sense of unity and high quality. （The design and texture are exactly the same, giving a sense of unity and luxury.)
Was the installation difficult?
Installation of this product is very easy as it can be done with a single hexagonal Spanner.
However, in my case, when removing the OEM Bar End, the tool was incompatible or rattled and licked the Screw hole.
If you are doing this as a DIY project, it is better to make sure that the OEM bar end can be removed without any problem. (The tool I used was Astro's Torx bit, and I managed to remove the OEMBar End because it was not tightened that hard.)
How was your experience with it?
The weight difference between the OEM Bar End and the OEM Bar End is not much, and I honestly thought the anti-vibration effect would be Brushbo. (I didn't feel that numb in the OEM condition to begin with.)
I feel that it is effective in terms of the appearance of the Slider system, which has become more unified.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
When an AELLA Bar End is attached to an OEMHandlebar or OEMGrip, there is a slight gap between the Grip and Bar End, and the Handlebar is visible. (This is the same with the OEMBar End, but the Bar End is now black, which makes the Silver Handlebar more visible.)
I thought that the Titaniumium washer that AELLA is selling is to hide this.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: DUCATI Panigale V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Side Stand is perfect!
Panigale and Streetfighter boots do not have good footing for most Japanese people. I am 177cm tall, but when I use a type of racing boots with the heel covered with a resin protector, like the ones from Pine Starz, the part where the heel hooks onto the side stand is too short and I slip and run away. When I am in the riding position, I can get it out with about a 50/50 chance, so when I am in good health, such as when I am refueling, I can stick it out a few times, but when I am tired, I can't get it out. No more." and I had to get off the Motorcycle and take out the Side Stand. If I had a normal leather or rubber bike, I would be able to get off the motorcycle and put out the Side Stand without any problem.
The AELLA product is almost twice as long as the AELLA product, so the Side Stand can be easily produced.
View detail
AELLAHigh Screen attached.
I generally like it.
The protective film was peeled off only at the screw holes, and then removed after installation and screw fastening.
View detail
Absolutely WRONG Slider Parts
Webike product page states they are for Ducati SF V2, but in fact they FOR PANIGALE V4 SP2!!! First the physical shape and installation points of received parts DO NOT match the photos shown on Webike prodcut page (which use an installation example of Ducati SF V2). Second the wrapping lable of the shipped parts clearlly stated "PANIGALE V4 SP2", NO words about SFV2. This is a completely stunned and wrong experience. View detail
Fits: DUCATI Panigale V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Easy to use.
[How is it used?
STAND was purchased before the car was delivered because it was difficult to get it out,
I installed it immediately.
Was the one you received as per Image?
It was as Image in the picture.
Was the installation difficult?
It was easy to replace with Wrench.
Locktite is applied to prevent loosening.
How was your experience with it?
The Hook is in view even when straddled,
It is easy to STAND.
[Included Parts:were they on?
There was a Handling Instruction Manual.
[Was there anything that disappointed you?
None in particular.
View detail
Fits: DUCATI SCRAMBLER 1100, DUCATI MONSTER 797 Plus, DUCATI MONSTER 797
AELLA
Tilt when parking has been improved:?? View detail
Very nice improvement in shifting..but expensive
After just 5000km my stock shift lever had a heap of free play. I saw this Aella shifter with a bearing instead of a bushing and thought I'd give it a try. It's hugely improved the feel of the gearbox. The only reason I've taken a star off my rating is the price...but you get what you pay for. It's a luxury item, but luxuries are typically nice to have. And it weighs 100grams less than stock. View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Center presentation
I used it to get the center out of the Caliper fixation. It could be installed normally without any problem. View detail
The price was high, but I'm glad I bought it.
good point
The width was shortened and became a natural position for me.
The shortened width of the handlebar riser allows the lever and switch box to be installed closer to the inside of the handlebar. This allows more room for the cable, and avoids the dangerous situation when using other handlebar risers, where the cable is too tight.
However, not all Risers can be avoided. Please try it at your own risk, with the feeling that you have no choice if it doesn't work.
I did not expect this, but the resonance point may have changed, and my hands are no longer numb from the vibration.
A bad point
I have the impression that it is expensive for one Handlebar (but the quality is good).
Use a thin Torx wrench to remove and install grips and switch boxes. What is Torque?" If you are not confident in your ability to do the work, please buy from the Shop and ask the Shop to do the work for you (see below). "A Friend in the Know." (The "Mere Old Man" is the most unreliable of all).
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS cafe, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
You can't have BALI.
When I tightened it immediately, it did not go in immediately, and when I took it out and checked the screw threads, there were many BALI and I had to shave them off with a file. After shaving, it went in smoothly to the end. Naturally, the anodized part was peeled off, which was unfortunate. The part will not be visible if it is tightened, but it was a shock to the manufacturer whom I trusted. I thought about returning it and exchanging it, but I decided not to because I thought I would receive something similar again. It is not a cheap product, so I wanted BALI to take care of it. View detail
Yep for me it works
Yep, in the case of my bike, this item works as advertised. Shifting feels more solid & deliberate. Easy to install so long all the bolts on the bike that need to come off, do so without putting up a struggle! View detail
GEAR loss will be eliminated.
I no longer have to go into Neutral.
I am very satisfied.
View detail