Reviews
Chain Guard
The system was installed in order to comply with Circuit's vehicle regulations.
The Bolt holes were easily installed without any misalignment, etc.
The gap between the Bolt and the Sprocket is narrow and there is no interference, but a shorter Bolt would be better.
The protruding corners look bad.
View detail
For Circuit
I bought this for Circuit.
Installation is easy as it is bolted to the place where the Maintenance Stand hangs. It would be better if it looked a little more stylish.
View detail
Processing assumptions?
The position of the screw holes did not match, which may have been an individual product difference, so I used Leutor to shave them down to match. View detail
For dress-up purposes
I have RFender in Carbon, so I bought this to tighten up the Rear area.
I heard that many people were having trouble installing the swing arms, but I was able to easily install them by temporarily attaching them to the front of the swing arm and then shifting them to the rear.
I'm not going to Circuit, so it's a complete dress-up. (Lol) 。
But it was hard to wait six months………
View detail
It's a different model of car, but it's not impossible to use.
[How is it used?
I used it on my YZF-R25 that I use in Race because it is required to be installed in Race regulation.
Since the delivery date for the R25 was long, I chose this one that was in stock.
Was the one you received as per Image?
I'm very happy with it.
Was the installation difficult?
It is very easy to co-tighten with Bolt.
I could have co-tightened the Stand Hook Bolt, but it would have been too far back on the R25 to make sense.
As you can see in the picture, it's lame, but I used Universal Bracket to bring it to the front side.
How was your experience with it?
It does the bare minimum of what I need it to do. Unfortunately, I'll be going to Spare when I receive one for my R25.
The upper side should be secured with Swing Arm and Double-sided Tape.
[Included Parts:were they on?
Comes with a 6Bolt
[Was there anything that disappointed you?
Not particularly
I don't really recommend it, because it's not a Manufacturer-inspired installation.
I think it can be used for any kind of car depending on your ingenuity.
The accuracy of the product was not bad. It was thick enough and chunky enough.
You can use it with confidence in terms of strength, and Bolt can be tightened firmly.
View detail
For Regulation.
It is installed for race regulation.
There are various types of Chain Guard, but the only type of Machine I have is the one that is co-tightened to the Rear Stand Receptacle, or the one that mounts to the Swing Arm by drilling a hole.
To be honest, I don't feel comfortable with the Swing Arm type that makes a hole in the Swing Arm, so I bought this one. To be honest, I don't feel comfortable with the Swing Arm type, so I bought this one.
By co-tightening, the position of the STAND receiver can be changed to QUANTITY:Pair (for Left and Right) You can use a spacer, such as Washer, for the other one. Balance is better.
View detail
Because of race regulation
I bought these because race regulations require the Sprocket guard to be installed.:Choose FRP with Black Gel.
This is a type that co-tightens with the Bolt on the STAND receptor, so it's quite easy to use.
Some sprocket guards have a hole in the swing arm. Personally, I think the latter type is more sturdy than the former, but I don't feel comfortable with this type.
View detail
Race essentials
Motive for purchasing
In order to compete in races, you are required to wear the Chain Guard by Regulation We have a lot of new models with the chain guard Recently, we have been focusing on sports models and other cars with the Chain Guard by OEM There may be mounting holes that take into account the retrofit of the Chain Guard
Not surprisingly, the Orthodox Naked model of the VTR250 has a The structure is not designed to be able to install the Chain Guard So, we chose the A-TECH Chain Guard which can be installed afterwards without any mounting holes I did
About the product
No modification is required by bolt fixing
The largest feature of this product is that it does not require any modifications to the body of the vehicle to be installed In the chain guard of Other Brand Product, it is possible to install There are many things that require drilling and Rivet stoppering However, in the case of the VTR250, there were no products that could be installed with the drilling process We have developed this product so that you can install the Chain Guard on VTR250 without any modification can be attached from Both Sides to the Swing Arm with the Bolt stopper It is The VTR250's swing arm is simple enough to use for free, but the holes You will not drop the
Wide range of protection and light weight
As you can see in the image, it covers a wide area in front of the Sprocket The Material is made of FRP and Carbon, so it is very heavy There is no such thing
Is it sensitive to vibration?
This may be an individual difference, but after installing it and running for a while, the Chain Guard There was a crack in it The crack may have come in from around the mounting position of the Bolt, and the vibration made the installation of the Bolt It seems that the load may have been applied, and the material is FRP or Carbon So it seems like a good idea to check it regularly to make sure it doesn't crack
View detail
It's a gem!
I bought it for the parts I needed to do the race
KevlarCarbon is selected for support
It's easy and cool because all you have to do is bolt it on
It's not too expensive, so it's a good dress-up
View detail
Making that it can not be thought of as a very exclusive item
Installation is very easy by saying Chain guard of type fixed with Screw. I bought Carbon's ones and liked it - - -. I noticed that the shape did not fit at the time of installation. I can not install it, Swingarm and Chain guard do not fit neatly in parallel like the sample photos (Chain guard itself has no problem). It looks bad like a picture because it sticks diagonally without sticking in parallel. I can not recommend it if you buy it with an appearance emphasis. View detail
I believed it because it is A-TECH
It is necessary processing. A-TECH in the world - - - M6 Nut mounting part for installation was not in Flat.
The processing position of the long hole on the front side was also deviated by about 3 mm and a gap was formed with Swingarm - - -
View detail
Safety and Dress-up
For safety and Dress-up, I bought it this time.
I used to run Circuit well since before, and to prevent the involvement of hands on Rear sprocket when falling, I also attached it to other vehicles.
I feel like the product name is Sprocket guard rather than Drive chain guard? - - -
With Chain guard, what kind of things are on the Swingarm?
(Manufacturer name like name but www)
I talked about it,
In 14 R there is no plan to run Circuit,
This time, I purchased it as a Dress-up effect.
In Circuit, common sense = general road, cognitive deficiency
I feel like it, there are not many people wearing it. I mean
Installation is done with a single Bolt.
With 3 minutes, I'm done www
However, because it will be attached to a curved surface with the shape of 14R Swingarm,
If you tighten it too tight, the upper part of Bolt seems to dig into it and I'm scared.
I painted the Screw lock agent and gently tightened it www
This time, Material : I ordered FRP, pasted Carbon StyleSeat, made it Carbon style.
safety - Dress-up effect - Circuit It is only a good feeling and a car feeling ♪
(It is an impression of an individual www)
View detail
I want all models Standard Equipment.
Since there is no particular attention to Carbon, I chose Black of FRP. I think that it is essential to install in case of fall. I bought it to avoid Risk by involvement. Because it takes a relatively long time for delivery, we will recommend a quick order. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I am wearing it once. - - -.
I am wearing it once, but it is almost inconspicuous Parts.
It is a place I can not see, but it was good if the shape was a bit more Slim.
Parts that I do not want to take care of.
View detail
[a Webike Monitor] -- the time of making CBR 250R into CBR CUP specification -- attachment of a Chain guard -- -- although it is indispensable, as standard, the Bolt hole for Chain guards does not exist in a commercial car. This produc
[a Webike Monitor] -- the time of making
CBR 250R into CBR CUP specification -- attachment of a Chain guard --
-- although it is indispensable, as standard, the Bolt hole for Chain guards does not exist in a commercial car.
This product of a price target is also cheap, and can equip with a Chain guard easily.
from which the Clearance removed the Rear fender by the Limit although it was about
attachment -- we recommend you to attach in a top.
Although
one attached with the Rear fender stuck, troubles were suffered very much.
Since handiness and the practicality of the
price are also enough, they are goods which we can recommend to you.
View detail
Since the Circuit run is considered, furthermore the Circuit had attachment regulation of a Chain guard, it purchases. Although purchased for fixed, I think that having considered the accident it was shopping good in the meaning which buys safety. funct
Since the Circuit run is considered, furthermore the Circuit had attachment regulation of a Chain guard, it purchases.
Although purchased for fixed, I think that having considered the accident it was shopping good in the meaning which buys safety.
functional, although there is also a thing made from the
Carbon -- FRP (black Gel) specification was purchased because what is necessary is just satisfactory.
When the product itself was carrying out the premise of the paint application, it had notes, but it was the glossy surface, and even if it was uniform and having been attached as it is, a feeling of a physical disorder was not.
Although it will probably be better to paint if a durable side is considered, since there are also no prices of 5000 yen, I come out as it is and think good kana.
Since the
attachment itself is only attached so that a Swing arm may be put, it is not difficult.
However, it has taken that a Drive chain case is obstructive and does not reach easily for about 15 minutes.
Possibly the direction attached after not extracting a hand but removing the Drive chain case finished quickly.
Since it was molded so that the portion which touches
Swing-arm side face might become a concave side for a while, even if the Tension was applied firmly as for putting and attaching and the guide peg etc. touched at the rainy day, prevent involvement firmly.
Since the
size is also a size, you may seldom need to care, but since it was under the Spring once, weight was also measured.
It was 94 g on the Cooking balance of the house.
I think that it is about [ without 100 g ] even if it considers the variation in production.
View detail
It purchased to the involvement prevention at the time of a fall, and a dress-up up. Although attachment is easy, cautions are required for bolting too. It was divided into itself and relief measures, such as a rubber washer, are taken against pre
It purchased to the involvement prevention at the time of a fall, and a dress-up up.
Although attachment is easy, cautions are required for bolting too.
It was divided into itself and relief measures, such as a rubber washer, are taken against prevention.
As for carbon, appearance becomes tight.
View detail
Appearance (design) purchase was carried out rather than having said that it is functional. If a bolt is tightened and it is crowded too much, it is crushed, and although it is fixing using a maintenance-stands hook bolt (?), since that is right, hone
Appearance (design) purchase was carried out rather than having said that it is functional.
If a bolt is tightened and it is crowded too much, it is crushed, and although it is fixing using a maintenance-stands hook bolt (?), since that is right, honestly [ if attachment is very easy, it is, but ] he would like to reinforce and obtain.
They are four stars if a price is cheap to a slight degree.
View detail