Reviews
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja1000
StrikerRear Fender
It was exactly what I expected! View detail
StrikerInner fender
It was difficult to install because of the lack of a center stand. The exterior is also perfectly fixed. View detail
Fits: YAMAHA XSR900 , YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09
If Twill Carbon can also be selected in this Style, it would be a perfect score.
The only regrettable point is that Striker is only available in plain weave, while many manufacturers offer a choice of twill or plain weave for exterior carbon parts.
I am satisfied with the design, the texture and the detail of the construction.
The Webig product page says it is 5 cm long, but it is actually about 19 cm long.
(Check with Striker's Home page before ordering)
This length is also good to make it Cover to the keyhole part of the Seat lock.
I also wanted to replace the OEM PeLePera Chain Cover.
View detail
The ABSMODEL on the ZZr1400 will come on just fine!
It's a ZZr1400ABS (2007 model) and it fits fine!
Clearance is perfect...I think it is very cool...I was looking for Long Type including Chain Cover, so I am very satisfied.
However, the motorcycle shop had a lot of trouble when installing it. It looks like they had to do a little bit of modification to widen the size of the hole.
The rear wheel also needs to be removed, so unless you are confident in your skills, I recommend leaving it to the PRO Shop ^ ^.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja1000
Overall, I'm satisfied with Large
The OEM Rear Fender is short and has a large gear suspension around the Because of the hollow space, it was easy to get the rear suspension and swing arm dirty even when it was not raining After struggling with CLEVERWOLF products to the end, I decided on the Striker! I found out at the time of temporary installation that there was no problem at all with Bolt On, no distortion or leveling problems I found a gap of about 1cm between the Swing Arm and the Swing Arm Cover, the gaps are completely filled in and I think this will reduce the dirt around the rear dramatically! View detail
Very good except prices
【What made you decide the purchase?】 I was thinking that it was for 14 R, but I saw the person attached to ZZr 1400 and thought that it was cool and decided
【How was it actually used?】 I thought about it because it was for 14R, but I am satisfied with a very solid build that is perfect without any interference.
【Was it difficult to install? (Hard parts case)】 It is a little troublesome to remove the arbitrary Rear wheel, but it can not be helped because the place to be attached is such a place, but it was able to be installed smoothly afterwards.
【Please tell me the point of installation and hang (in the case of Hard parts)】 If you do not want to wear any scratches, I think Bracket and other things that are likely to interfere are removed beforehand, then it is perfect if you do curing.
[Is there anything I was disappointed about?] It is not required.
【Hope for Manufacturer ? Please let me know if there are any improvement points] Required 55 Tire But Large I want you to be strong. I wish the price is a little cheaper ? ? ? I think.
【Have you compared items?】 I almost saw where I gave the same Parts.
View detail
Fits: YAMAHA XSR900 , YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-09
Only the price is dissatisfied
MT09 I installed it in 2017 year. Fender Eliminator is essential so it was quite expensive but I am satisfied.
I think the precision of making is also high. There is a certain effect of mud splashes, but it is not as dramatic.
Because my wife does not notice at all, it is a world of self-satisfaction that can not be understood by those who are not interested.
View detail
Effect as Fender - Both good design
I think that it is the largest Large as Fender in ZX - 14R, purchased and installed in Shop.
I did not know how to install because the installation was done at Shop, but I think that it is quite Large strange when it comes to mounting with this large size..
Although a little value is stretched, the effect as Fender is sufficient and design is pretty decided.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja1000
STRIKER STRIKER Aerodynamic design CarbonRear
Purchased for installation in 2014 MODEL Z1000.
By saying Striker, I was relieved to be honest although I was relieved. It may be that there is a disappointment, but my own was out. I do not know whether you are using a considerably populated mold, but the twist of the product is so bad that the area around the Chain cover is warped and it got cramped quite caught by Screw. I did not complain if I bought it with a cheap Gold amount, but it was not a thing I bought out 36000 yen. I managed to install it myself, but if you buy it I think that it is better to buy with the worst processing being prepared..
View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA300, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50R ABS
Shape good. Cospa ,,,,
Because I made it to Fender Eliminator, I was concerned about Fender's dirt so consider buying Inner fender.
It was slightly expensive, but it was excited and purchased because the shape was compatible with ABS cars because this product was the most favorite.
Installation was possible without removing Rear tire, but it is necessary to remove Tandem Footpeg and it is difficult to fix Tie Wrap. (Although there is no problem in use.. )
Also, regarding attachment to an ABS car, desorption of the Tube is necessary, but unexpectedly hard and large change;
Try replacing it, surprised again by the shortness of OEM's Fender. Since there are several times the length compared with OEM, the effect will be inevitable.
Also, I have made Exhaust System MagicMETAL of YOSHIMURAR - 11, but because Carbon quality matches well.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja1000
Large It is satisfactory!
I installed it in ninja 1000 2012 ABS. Anyway Parenthesis Good and Large Satisfaction! Because I like squid rocks, Nojima until the end (Tendanyaya) I got lost. Since I was wearing the Side cover of A-TECH's Twill Weave Carbon, I tried to make Nojima's twill weave than Striker which has only a plain weave ... But since I really liked the shape of Striker, I got lost and got stranker did. As a result, Carbon's eyes' Large Kizi itself is different from Carbon of Side cover, so I think that perfect unity was not even if it was twill weave. (Although the same A-TECH product would give you a sense of unity, by no means Re-Fender of A-TECH did not have the shape Pin)
So, as a result, it was a correct answer to Striker.
Length also became considerably longer than NORMAL, so it seems that you can expect a mudguard effect.
Even when viewed from the back, the level is perfect as well as horizontal feeling. BEET's Exhaust System is on, but Balance with the Exhaust System is also good.
Tone color is slightly more dense compared to A - TECH, Patternwise, it is slightly finer compared to A - TECH.
There was only one problem. Striker 's Rear Fender is integrated with Chain guard, so we also removed Normal' s Chain guard. I asked Shop for work but NORMAL fixed the Chain slider in two places. One of them is fixed with a pin shape which is from Chain guard. Because it is not in StrikerFender, Chain slider becomes slightly unstable if it is as it is. So, I had you do Cut and hold work of Pin shape of NORMAL's Chain guard.
Because it was in stock, it arrived in 2 days after ordering, and it was able to be installed after 4 days so I was very thankful.
View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA300, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50R ABS
My motorcycle has twin silencers, but it didn't take much time to exchange them, and it was pretty easy. However, although I followed their instructions, it became misaligned in the left direction. I noticed that others have also pointed out this fact in
My motorcycle has twin silencers, but it didn't take much time to exchange them, and it was pretty easy. However, although I followed their instructions, it became misaligned in the left direction. I noticed that others have also pointed out this fact in their review comments.
As a consequence, the clearance between the silencer and the right tire became extremely narrow. So I pushed in a rumpled Kleenex between the tire and the fender, and left it there for a day. Maybe it's just my imagination but I think it has been fixed a bit. I hope it gets better from now.
Still I look its appearance, and I'm really satisfied with it!
View detail
If mud splashes and raising relief is carried out, when a Fender less is used, since it is a longer Fender was thought, and it purchased.I think that it becomes time and effort very well since attachment must remove a Tire.There is distortion as it is
If mud splashes and raising relief is carried out, when a Fender less is used, since it is a longer Fender was thought, and it purchased.I think that it becomes time and effort very well since
attachment must remove a Tire.There is distortion as it is pleasing since the
Styling is good, but it has written also on the instruction manual.Although it will seemingly be repaired if it equips -- ?!
View detail
Attachment seems to be serious although possibly preparations were insufficient. The Rear tire is removed and it is also a Suspension... The description was seen, and I judged immediately that it was impossible by itself, and asked of Schopp.
Attachment seems to be serious although possibly preparations were insufficient.
The
Rear tire is removed and it is also a Suspension... The description was seen, and I judged immediately that it was impossible by itself, and asked of Schopp.
View detail
When he wanted to reduce dirt and the rear fender was looked for, it met with this product. If it equips together with an under armour, it will change to the racy image related in carbon drastically. It fell in love with these looks at first sight
When he wanted to reduce dirt and the rear fender was looked for, it met with this product.
If it equips together with an under armour, it will change to the racy image related in carbon drastically.
It fell in love with these looks at first sight.
It is very pleasing.
Although it is the mitigation of dirt which was being made into the purpose, it seldom changes.
It or the places to wash have increased in number.
In a rear fender, it seems that dirt is unmitigable.
Although it is about attachment, in order to have to remove a rear tire muffler, I had you carry in and attach to a motorcycle store.
I think that the direction which has had complete set of tool can be attached.
Although it will waver in price, he buys it and I think that it was good.
Although he has no complaint if cheap to a slight degree -- The above point is synthesized and they are four stars.
View detail
Although it was the parts which he wanted from before, there is no exclusive elegance and it was longing for sale. It is gratitude at the striker who made the elegance only for a vehicle type which ended production. About whether it is functionall
Although it was the parts which he wanted from before, there is no exclusive elegance and it was longing for sale.
It is gratitude at the striker who made the elegance only for a vehicle type which ended production.
About whether it is functionally required for zep750 of 2 Sas, although it is a question, the impression of a motorcycle changes considerably.
If it often sees, the line which was parallel to the frame, the swelling of the torque rod portion, etc. are the very elaborate design.
Attachment is fixation with two screws and nylon thailand of a chain case of normal.
Even if it did not remove rear suspension, along the direction of rotation of a wheel, you were able to make it have been able to crawl, and it was able to make and attach.
However, it is safer to recuperate oneself on a lap etc. so that a crack may not enter.
Although it might be freely mistaken for Z2 and might be disappointed made selfish before, such a thing was also lost after attaching this.
It is delightful miscalculation (smile).
View detail