Reviews
ACTIVE Reflector
Slim type Reflector.
It's a shame that the Bracket was twisted when installed and was not slightly straight.
View detail
Reflector kit
I bought it to go with my Active Fender Eliminator Kit! It looks really cool now that the License Plate has been reflashed! I recommend this product because of its low price! View detail
Japanese Vehicle Inspection Correspondence
I am riding XL1200C SPORTSTER 1200, and I had been struggling with battery up. I changed the stop lamp and stop-lamp to LED, just to ease my mind. I like it because it looks very modern, but I lost the reflector. At first, I had installed Universal Lens, but I was told that there was a problem with the vehicle inspection. So we installed this product. I chose the silver color because it is white. It blends in so well that you wouldn't even notice it if you didn't talk to me. View detail
Looks Refreshing!
Looks Parenthesis better than OEM Product! View detail
SMARTest shape in compliance with laws and regulations
We replaced the Rear Fender of our CB400SF with Active's Fender Eliminator Kit, but since the Reflector was sold separately, we chose this product.
https://www.webike.net/sd/24858765/
This is a combination with Kore.
Various companies offer lineups in various shapes, but we felt that this was the best in terms of design and adopted it.
Photo Quantity:Limit the minimum area on the Rule as shown in the 1pc. eye (instruction manual). [Color] Clear. Excellent.
The reflective patterning is also well designed and is inspection compliant.
It has a long hole to adjust the height of the reflector by about 5mm, which is called ReflectorSlide function. This allows the reflector to coexist with a frame (depending on the product).
The Number and Reflector surfaces are folded at about 45 degrees, and the angle at which the Reflector is generally perpendicular to the road surface is desirable, so it is best to fine-tune the angle to match the Fender Eliminator design.
The Fender Eliminator on my own CB400SF Active is 40-Degrees, so a 45-degree finish should be slightly inverted Slant, but in fact it is almost vertical, so no correction was made.
HondaDream stores, for example, have a strict policy of not allowing illegal Custom vehicles to enter their stores, so it is necessary to take these measures when sending them in for inspection. (I was told by a Dealer)
Some of the cheap ones may have the red color of reflector faded by ultraviolet rays, or the design of the reflective parts may be so bad that the car will not be inspected after all. However, it is safer not to add any parts to the class for vehicle inspection.
View detail
With Fender Eliminator Kit
I purchased this kit along with the Fender Eliminator Kit.
It is a Slim shape, so it is good for Refreshing.
Installation is nothing difficult as it is simply inserted after the License Plate.
View detail
No complaints
When MAD's Fender Eliminator Kit was installed on a CB650R, this reflector was used.
I have no complaints about the cospa, texture, or design.
View detail
Stylish & Compact despite Japanese Vehicle Inspection Correspondence
I was attracted by the compactness and slimness of this Japanese Vehicle Inspection Correspondence. I think it will look stylish in combination with the Fender Eliminator Kit. View detail
Is the Reflector Bracket a little long?
The Fender Eliminator Kit itself is of good and stable quality, as it has been used in my previous cars, but this time, the Motorcycle is a MONKEY125 with a License Plate.
I am considering to cut the bracket a little and weld it, but the welded part will pick up vibration.
I'm thinking about it because I'm worried that it might break! If possible, it would be nice if the lineup could include one with a bracket that matches the size of the 125cc Nan Bar.
View detail
Probably the Slimmest Reflector
[How is it used?
The Fender Eliminator Kit did not come with a reflector, so I bought this one.
Was the one you received as per Image?
Very good as per Image.
How was your experience with it?
It is very slim and matches SS Motorcycle quite well.
[Points to note]
May interfere with License Plate.
How did it compare to other products?
I think Active's Reflector is probably the most Refreshing of any Manufacturer.
View detail
Satisfied
Simultaneously replaced when ActiveFender Eliminator is installed.
I wanted a Slim Reflector and it turned out exactly as I wanted.
View detail
I guess this is the shape I'm personally looking for.
Installation is done by co-tightening with Number. I personally chose the most comfortable shape. It is also cosmetically good, and even if it fails, it will not be a problem. Oh, well. I think the price is good. View detail
Required to make Fender Eliminator
I purchased this because I needed a reflector when converting to Fender Eliminator.
Installation is co-tightened with the License Plate.
Three shapes (Square, Trapezoid, Slim)
Two colors (Black, Silver)
so you can choose the one that fits your Motorcycle.
Also, note that SmallEngine Displacement Volume (125cc or less) reflector kits have different dimensions between the holes, so be careful when buying them.
View detail
Cool, easy to install, highly recommended!
I bought this kit at the same time I installed the Fender Eliminator Kit on my Grom jc75, and it is simple and cool. I was not happy with the 1cm gap between the License Plate and the Reflector, so I had to modify it to fit the gap. It is good to use the ready-made one as it is, but I like to fine-tune it and make it more to my liking. I can recommend this product. View detail
active reflector kit
Hello cb400sf The pure rear fender was plain So I found it I bought two active and Kijima products I think active products are good because they have LED lights It was a bit complicated when I installed it But it's neat and beautiful Thank you. View detail
Perhaps this is the only choice.
Used for YOSHIMURA's GARBON License Plate Holder.
I was using an Active Fender Eliminator with a Daytona reflector, but the PlateHolder was too long for the Daytona reflector, so I switched to an Active Reflector with long mounting holes. It fits perfectly and is very good.
View detail
a legal requirement
I ordered it with a fender kit because there should be a reflector around the license plate. It fits perfectly because it's from the same brand. View detail
buying the same item multiple times, each one being a different color (colour)
[How is it used?
I bought the Fender Eliminator Kit from Active to go along with it!
Was the one you received as per Image?
As you can see in the Image, it is neither good nor bad.
Was the installation difficult?
Very easy to install
How was your experience with it?
The Reflector is performing its function well.
I think it is good because it is not too large.
View detail
this one option
I think it is the coolest of all Reflector products.
I always buy a Fender Eliminator when I have one.
View detail
Fender EliminatorSpec.
This time Quantity:2pc. I bought the Set for the second time, and I bought it again because it was so good last time. View detail