Reviews
Φ7 but Scauper thin
I bought a battered 900SS (900SL) and am Restore.
The engine of bimota db2 (DUCATI 900SSE engine installed) was transplanted to 900SS which is being restored, and since I took this opportunity … I also replaced the plug cord.
The old Plug cord was a 30 year old OEM cord and was quite stiff, but there were no problems and the fire burned beautifully the whole time.
However, it is old and the core wire is a single wire (!).
A line nearly 1mm thick is a Quantity:I changed to this code for fear of disconnection since it is only 1 pc.
This one has a double core wire and seems to be resistant to bending.
The surface of the cord is not Silicon, etc., but the old-fashioned Vinyl coating.
The color is simply Black, and since it is a Type Black color without Luster, it looks like an OEM code itself.
It's a loud color and how it looks. I changed it!" It is EXACTLY for those who do not like to
It is not soft like Silicon cord, but hard like OEM cord, so if you are not told, you will not be able to distinguish it from OEM.
The thickness is Φ7, which is a normal size that is common in other companies, but Silicon cord is often Φ8, so it is a bit thinner than it looks.
In addition, it seems to be very slightly thinner than the Φ7 code of other companies (within the error level measured by Caliper, so it is really just a feeling).
I am using AS Uotani's ignition coil, but the hole in the WaterproofRubber cap that covers this Connector is too narrow, so it is difficult to pass the cord through if I use another company's cord.
Of course, this cord doesn't go through smoothly either, but it still seems to be a little easier to pass...
So it would be easy to use for those who are changing to Dayna or Utani.
View detail
DAYTONA Plug Cable not bad at all
I bought a one meter long cable because the two meter long cable was out of stock at the time I bought it. However the one meter long cable is sufficient for my needs .the prices are much lower but the quality is the same as the OEM plug cable. DAYTONA Plug Cable not bad at all cause quality is excellent and very good indeed. I highly recommended.The price was very low so I bought it without thinking twice. It is definitely worth the money. You won't find spare parts for less than these prices anywhere else. Webike shop is the only place where you can easily and confidently deal with the lowest prices. I would say very authentic online shop.I'm giving 5star .Need to remind WEBIKE packaging and fast service. webike packaging is awesome and no need to worry about it .Overall ,TOPNOTCH service .Much Appreciated. Thank You webike !! View detail
Cheap and easy to use
old car (SportsCUB) Used to update a Cable that has become Pushing Kochi in Restore of
It is a very common Cable.
It also fits well with the objective of pure Restore since the appearance does not change after replacement.
We were able to successfully renew it.
View detail
I think it is sufficient.
I have an impression that it is a general plug cord. If you are not concerned about the color, I think this is sufficient for you. View detail
It doesn't work for Uotani.
I don't think there is any problem with the quality of the product.
However, it is not possible to install it on the Uotani Ignition Kit.
In the process of extracting the core wire of the plug cord, the Outer and Inner parts of the cord body cannot be separated, so the ConnectorBracket cannot be crimped and cannot be used.
View detail
OEM same etc.
Used for BALIUS2.
I bought this Motorcycle because the price of the Plug cord and Coil is quite Gold for 4 cylinders in one unit.
I was able to purchase one and install it for 4 cylinders.
It does not feel particularly poor to the touch, but Cut was easy.
The yellow-colored tape in the photo is an OEM Product.
View detail
Softer than OEM
It is softer than OEM so it is easy to handle. I put Nitrile Bond on the coil side. Durability is still to be seen. View detail
Simple
I installed it on GSX250 KATANA.
The length is also Exactly.
Now it would be nice to have a choice of colors.
View detail
There is nothing special about it.
The OEMCable had deteriorated considerably, so I replaced it.
There is nothing difficult to install. Some vehicles may require a Shim to fix the plug cap, but you will need to consider how to secure it separately. This product is for Cable only.
The deterioration of the ignition system blatantly affects the Engine's Fee Ring, so any Cable that is rusty or cracked should be replaced immediately.
Even if it runs 30,000km, there is no problem at present. It seems to have a long life span.
View detail
Standard Cable
Because blue rust had come out to the Plug cord of BALIUS which was purchased by used, I purchased it as for Replacement. (´-ω-)
Although it is described as soft in other Impressions, it is a little firmer than the OEM Plug cord of BALIUS?s Plug cord, and even in a layman's sense, I have the impression that this level of hardness is necessary and sufficient.
I started it up after I installed it and it worked quite normally.
It is a normal, but reliable Manufacturer's Plug cord.
View detail
The product itself is very satisfying because it is priced right and has a NORMAL feel to it.
This time, I'm going to use Votani Coil.
You have to peel off a thin layer of skin to put it on, but this was a bit of a challenge.
It wasn't made that way to begin with.
If it's Uotani, I remember that KIJIMA or something like that is easier to peel.
The outer diameter is 7mm, so no problem (and so is KIJIMA).
View detail
When in doubt, the right thing to do is to buy a 2-meter length
The quarter-century-old OEM Plug cord became hard, and every time the plug was fiddled with, it slipped out of the Cap You will not
The hole of the electrode is also cracked noticeably, and it feels like inserting rather than screwing in Even if the ignition system was strengthened, I decided to replace it because I was worried about a leak
KATANA's OEM code is only the length of the crank limit, and I always wish it was a little longer I thought..
When I measured it, I found that the total length of the 4 strands was about 95cm, and I bought 2m to give myself a little extra time to change them It was
Even at 2m, it's affordable and I have no complaints about its performance
However, it's a soft cord, so screwing it into the Coil and Cap requires a bit of work, and I'm not sure I'm going to be able to do that I used SmallScrew to make the Guide hole in the end of the cord beforehand
This alone will make your work a lot easier and your connection will be well
We finally made each cord about 3cm longer than the OEM, but the length is just right It's also easier to handle with
However, 1m is not enough for this, and it was the right choice to buy 2m It can be used as a spare in case of emergency
In terms of design We're doing business There is no feeling of "Daytona" It is just a black code (Laughs)
The result was a perfect fit for my needs for an OEM look
One thing that I found a bit disturbing is that it's listed as 7mm thick, but it seems pleasantly thin (About 6.7mm?)
It may be an individual difference, but you may need to be careful depending on the type of car you are installing Mm
Overall, I am fully satisfied with the product
View detail
DAYTONA Plug Cable
I bought a DAYTONA Plug Cable to connect the CF POSH Racing IG Coil all came up and works fine, the cable looks good, we'll see how it shows itself in business. View detail
Evaluation comment can not be done because it is before use I think that it is a good one
Evaluation comment can not be done because it is before use, but I think that it is cheap in terms of Cost. I will recommend it to my friends if it is good to use now. View detail
Was good (o^^o)
I received it as soon as I bought it (^-^)
Impression after having installed quickly. It is safe to have enough 2 M even with 4 cylinders enough to be enough! The remaining part can be used someday again.
As impressions, I did not say that the performance got better because I attached it, clearly became better when compared with the previous code. Of course it is natural to say that the code will be more than 20 years ago, but if you can ignite well, ride comfort is good (o^^o)
Afterwards if Coloring is unexpectedly Black, it will be White face stuff.
But overall it is a satisfying product!
View detail
Honda OEM Product same outer diameter 7 mm, performance also complained none
OEM ignition of Honda car As Coil diverted,
I bought it. At Nankai parts and Lyco Land
The sold Plug Cable has an outer diameter of 8 mm
And so on, trying to replace Cable itself
Since it does not get stuck with Ignite Coil,
It is necessary to peel off the film.
As a result, it seems like it is leaking during rainy weather
Because symptoms appeared, exchanged here with an external diameter of 7 mm
Did. I can not confirm the symptoms,
Performance to Plug cord of POSH which used before
I do not receive any inferior impression. This price is 1 m,
Is this enough for those who want to change Plug cord?
View detail
Cost performancegood
Cost performance is good as it was purchased for less than 1000 yen at 2 m! It was possible to install without any problem. It is satisfactory enough!
Just think that it is better if there is a choice of color.
View detail