Reviews
Great Value
Perfect for the price. Fittment is great and very easy install. Mirror quality not 100%, but more than enough (given the cost). Fine if you are use to bar end mirrors. Two-way fit option is great. Perfect for the Hurricane bars. View detail
Cospa is quite good.
Anyway, cheap is the best Merit.
The quality is in line with the price, especially the bolt on each part is quite cheap. Be careful not to over-tighten the bolt, as it can easily be nipped.
It is by far lighter than the expensive bar end mirrors of DAYTONA and TANAX, so there is rather less anxiety about it falling off.
View detail
A little wobbly, but … looks good.
I installed it on CBR400R.
The handlebar was previously replaced and installed with 16mm inner diameter separate handlebars.
It will probably loosen and fall off while riding, so it must be retightened.
There is a wobble.
If you're concerned about it, you shouldn't.
View detail
Good budget mirrors with a better viewing angle
About quality and texture, I can confirm that the quality is good and that the material used is aluminum alloy that has been machined to shape. About the feeling of use, These mirrors are less instrusive then the original mirrors and when fitted to the bike also offer a better viewing angle from their convex designed mirror. Products to buy together, While working on the handle bars it would be advantages to also add a set of more comfortable grips to your cart. Difficulty of installation, I can say the fitment of the bar end mirrors for my installation was very easy due to the simplistic design of how the mirrors secure to the inside of the handle bar pipe. Cost performance and comparison with other products, The pricing of the product is great. You receive a set of bar end mirrors that are of good quality and a great look. The pricing of the majority of the other bar end mirrors available are much higher for similar product. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Better than expected
Handlebar is HURRICANE's Forward Conti2.
Installed more securely than I expected.
The curved Mirror has a wide viewing area, but the size is small, so it takes some getting used to to get a sense of the distance.
To be honest, I wasn't expecting much, but now that the Handlebar area is Refreshing and Parenthesis has improved, I'm satisfied.
View detail
Bar End Mirrors from Rin Parts
* About quality and texture, Durable black painted finish over the aluminium housing and mounting brackets. * About the feeling of use, Extremely happy with the low profile look of the front area and I can now see clearly what is behind me. * Products to buy together, To tidy up the front area further a nice set of machined aluminium brake and clutch levers. * Difficulty of installation, The installation with aftermarket handle bars is just insert into the end of the bar and tighten down the allen key bolt, then remove the Honda OEM ones and plug the mounting holes. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, No cheaper bar end mirrors of this style and great quality for the price. Webike do offer much fancier designs and machined aluminium finishes if your budget allows. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you still have the Honda OEM handle bars installed then you will not be able to just insert into the end of the bar and tighten down the allen key bolt, modification of the setup will be required. Use the product reviews to assist in making a decision on your purchase. View detail
RIN PARTS Bar End Mirror
About quality and texture - Top quality. Cast aluminium body with a nice chrome finish to match the old school style motorcycles. About the feeling of use - These are much better looking style wise then the OEM Honda lollipop mirrors and I now have more visability behind me due to the wider mounting position of the mirrors. Products to buy together - After removing the OEM mirrors you will be left with exposed bolt holes in those mounting points, so you will be wanting so blanks to cover these up. Webike offer plastic ones at a low cost which blend in well or cnc machined ones if you need to add some bling. Difficulty of installation - Once you remove the OEM bar ends on the Monkey their will be inserts let in the handle bars which you can use to mount up these bar end mirrors once you discard the spreader rings. Easy install that will take 30 minutes to complete. Cost performance and comparison with other products - These bar end mirrors are on the cheap end of the pricing scale but I find the quality tops for the money. If you want the best bar end mirrors out there then you'll want some CNC machined ones at a much higher cost. Webike have a great range to choose from. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - Take into consideration the diameter of your handle bars when looking for bar end mirrors as these will not fit fat bars due to the larger internal diameter. View detail
RIN PARTS Bar End Mirror
About quality and texture - Top quality. The surface finish from the CNC machining is so much better then the plastic OEM mirrors. About the feeling of use - They mount firmly to the handlebars with zero vibration even when idling the bigger 1200cc V-twin. Products to buy together - Some short CNC brake and clutch levers go together nicely with these mirrors. Difficulty of installation - Installation process is easy and can be accomplished with just an allen key but I did find that I needed to add a spacer on the throttle side to stop the mirror binding up on the throttle tube. Cost performance and comparison with other products - $32 AUD for a set of anodised CNC machined mirrors Just as good as the expensive ones and I'm not a fan of spending big dollars on mirrors as they are something I damage quite easily. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - These mirrors have a convex lens which can be strange to use initially but once you get use to them I find them much better then a standard flat mirror. View detail
I'd buy it if I switched
Because the Mirror of OEM extending upward is badly parenthesis
I always replace them
It's easy to install and you can see the back of the car
It fell off once while driving, so you need to retighten it occasionally
It's large enough to not detract from the look of the motorcycle
The XSR I'm riding now has a brand called High Cider with a Bar End
In use in combination
I don't care if it breaks because it's cheap
View detail
Less blurring and a wider field of view
It's more than I expected
Visibility is good and there is little blur
I didn't particularly notice any blurring at all
It's good to have good visibility at a wide angle, but
It's too wide an angle and gives you a false sense of distance from the cars behind you
I thought he was pretty far back, and then I actually looked at him
On the other hand, I can be right behind you and giggle
Also, cars that are a little bit behind
It's a pea grain and is almost impossible to see
If only they'd cut back on the wide angle a bit more
It's a very good product and it's very disappointing
View detail
Cost performance is good, quality is good
I bought it to make a Bar end mirror
I wasn't expecting much from the price
It's unexpectedly well done
It's a fairly wide angle Mirror
Small size, but with a fairly wide field of view
Support
In addition, the lack of blur was also in line with its previous reputation
As a product
I have no complaints at all
This is too wide of an angle
On the other hand, it's also a weakness
The nearest one
Because it's quite far away in the picture
The car I thought was behind me
In fact, a visual check
It's pretty close and scary
On the other hand, cars that are a bit farther away
It will be a pea grain on Mirror
View detail
Bar end mirror Suitable for beginners
I feel that quality is good for price.
Because it is not compliant with vehicle inspection due to mirror area and other conditions, it is necessary to use it after being conscious.
That's because it's Small, so I like it myself...
There is little wonder and shake of the mirror surface due to vibration in the high rotation range.
Hexagonal Wrench is necessary for angle adjustment, so it will not be a bit of a fix with signal wait.
If you are not sure what to make it as a bar end mirror I think that it is easy to try in terms of price.
View detail
Best for Dress-up
Mounting as underMirror on nc 36.
Purchased for use as UnderMirror.
Quantity Ball in : Pair (for Left and Right) If you replace it, you can use it enough as UnderMirror.
Plating is also cool enough Dress-up is enough enough.
However, since Mirror itself is also small, visibility is not so good.
It was a satisfactory item even if I deducted that point.
View detail
I love them, because not just a mirror, they fuctioning as the bar end stabilizer too, reduce the vibration on my handlebar. The mirror is looks very nice, reasonable prize but good build quality. It's fit the low handlebar on my bike, and make the cockpi
I love them, because not just a mirror, they fuctioning as the bar end stabilizer too, reduce the vibration on my handlebar. The mirror is looks very nice, reasonable prize but good build quality. It's fit the low handlebar on my bike, and make the cockpit looks simple without ordinary mirror. View detail
It was surprisingly unexpected.
It was a little uneasy as the price was cheap, but the structure of the goods that arrived, the structure is so firmly.
However, I felt Mirror's quality was not very good. Cut face of the edge can be seen through.
I have not used it in the long term, so I hope it will not break ...
View detail