Reviews
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI W400, KAWASAKI W650, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Estrella.
Very convenient!
ACTIVE's LEDNumber SIDEBlinker Straight I used this product to install a Kawasaki Ninja 250SL for KAWASAKI, and of course it fits just right! This product is a recommendation! View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Estrella., KAWASAKI ZRX400II, KAWASAKI W650, KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750
Blinker Conversion Coupler
I think it would be convenient because it would eliminate the need to cut or otherwise damage the OEM connectoretc. when replacing it with an external LED Blinker. View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI W400, KAWASAKI W650, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Estrella.
POSH Faith:Posh FaceKawasaki Blinker Conversion Coupler
I used the Blinker replacement on my 8BL w800. I could use it without any problem at all. If possible, I would have liked the color of the coupler to match the OEM, but considering the cost, I guess it can't be helped. View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Estrella., KAWASAKI ZRX400II, KAWASAKI W650, KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750
To Blinker's Coupler change
I bought this to change Blinker's Coupler. View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Estrella., KAWASAKI ZRX400II, KAWASAKI W650, KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750
For replacement of external Blinker
After the Fender Eliminator and the Rear Refreshing, I decided to replace the OEM Blinker with an external Blinker because of its presence.
When replacing without cutting off the original wiring, this can be used to connect Smoothly to the Coupler on the vehicle body side.
However, regarding the terminal on the Blinker side, this model number (091077) Kawasaki Male terminal compatible with Female terminal. I noticed later that Kawasaki's Bullet Type Terminal is thin. 091079." The part numbers of the Honda/Yamaha Male terminal compatible with Female terminal. It seems
I didn't have a Bullet Type Terminal for Kawasakifor Vehicle, and the wire of the external Blinker was not Bullet Terminal processed, so I processed both TAB and receptacle with Bullet Terminal (Emon) that I had on hand. I processed both TAB and receptacle with Bullet Terminal (Emon) I had on hand.
Similar couplers from other companies were also sold, but the lines are longer than those, so if there is a possibility of processing, it would be correct to choose Posh's couplers with some length because it would be Large strange to process if you choose too short ones.
Also, the couplers on the body side are color-coded in Black ash, but these two are both Black, so do not make a mistake in connection when installing.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Estrella., KAWASAKI ZRX400II, KAWASAKI W650, KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750
To replace an external Blinker!
After the Fender Eliminator and the Rear Refreshing, I decided to replace the OEM Blinker with an external Blinker because of its presence.
When replacing without cutting off the original wiring, this can be used to connect Smoothly to the Coupler on the vehicle body side.
However, regarding the terminal on the Blinker side, this model number (091077) Kawasaki Male terminal compatible with Female terminal. I noticed later that Kawasaki's Bullet Type Terminal is thin. 091079." The part numbers of the Honda/Yamaha Male terminal compatible with Female terminal. It seems
I didn't have a Bullet Type Terminal for Kawasakifor Vehicle, and the wire of the external Blinker was not Bullet Terminal processed, so I processed both TAB and receptacle with Bullet Terminal (Emon) that I had on hand. I processed both TAB and receptacle with Bullet Terminal (Emon) I had on hand.
Similar couplers from other companies were also sold, but the lines are longer than those, so if there is a possibility of processing, it would be correct to choose Posh's couplers with some length because it would be Large strange to process if you choose too short ones.
Also, the couplers on the body side are color-coded in Black ash, but these two are both Black, so do not make a mistake in connection when installing.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Estrella., KAWASAKI ZRX400II, KAWASAKI W650, KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750
Lines are thick and secure.
The Blinker wiring we used was too thin, so we modified it and installed it here. View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI W400, KAWASAKI W650, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Estrella.
If you want to change Blinker to Other Brand Product
Used to replace the Blinker from Other Brand Product.
There is also a way to turn off BodyHarness and change it to Bullet Terminal.
I didn't want to hurt OEMHarness, so I installed it!
In my case, I changed the look of the Motorcycle to Large, so I'm going to digress.
If you don't want to change the appearance too much, but want to use LED Blinker, you can do so.
I strongly recommend you buy this one so you can always go back to OEM!
(When you trade in your product, the value of the OEM product will be higher.)
The things are sold exclusively.
The Coupler side sticks to the Beauty and has good continuity.
In the case of inferior Chinese products, the LEAD wire may break or the coating may deteriorate and crack.
After 5 years of use, I have no problems, so I think the Wire part is using reliable Material.
It is important to note that this is for a single bulb without position.
It is recommended that you check the compatible car models before purchasing to avoid buying the wrong one.
Also, if the Blinker side of the Other Brand Product has a Bullet Terminal, you can still use it.
There is a good chance that the Spec. may not match, and some of them don't come with Bullet Terminals in the first place.
It's a good idea to have Electric Works Pliers and Waterproof Bullet Terminal Set with you.
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI W400, KAWASAKI W650, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Estrella.
Used for Rear blinker of ZX-25R
I bought this one because I needed to modify the OEM Wiring for my BlinkerLED conversion!
Can be installed with Bullet Terminal without scratching the OEMWiring!
I think it's good that it can be powered when plugged into the OEM Coupler, so it can be quickly removed when it's time to change back to something else!
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Estrella., KAWASAKI ZRX400II, KAWASAKI W650, KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750
Coupler
Purchased as a replacement for the Blinker.
Reasonably priced and the length is just right and satisfactory.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Estrella., KAWASAKI ZRX400II, KAWASAKI W650, KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750
Convenient to have
When I installed the ZX-25RFender Eliminator Kit, I also replaced the blinker with an external one, so I bought this conversion coupler.
I didn't want to cut the harshness on the car body when I installed the external blinker.
Recommended
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Estrella., KAWASAKI ZRX400II, KAWASAKI W650, KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750
[Webike Monitor] attachment was easy. Although the Service manual had removal of a Cowl with necessity, it has attached only by removing the Cover beside a Tank.
[Webike Monitor]
attachment was easy.
Although the
Service manual had removal of a Cowl with necessity, it has attached only by removing the Cover beside a Tank.
View detail