Reviews
Change from XC Protector
This is a change from XC Protector.
XC Protector cracks every time it falls, totaling 3Quantity:I bought a new Set.
I am trying this one because it cracks too quickly, but it also cracked too quickly.
I would like you to use more sticky Plastic because it is Protector.
View detail
For a change.
The price is low, so I decided to go with Black this time for a change of pace since I had White before.
Off-road, it is helpful to have Repair Parts at affordable prices because they are consumable.
View detail
Plastic, just a dress up..
Plastic, just a dress up..
Fits well with the Jetta handle guard.
Just like a dress up with curves.
It's pretty, but the price is outrageous...
I hope you use it for a long time
Zeta products are perfect for Hunter Cub.
I highly recommend it. You can install it on your dual bike when you sell it later.
.. ------------------------------------------------ ---------- Plastics just dress up ... It fits well with the Zeta handleguard To the curve It's pretty, the price is very bad, but ... Please use it for a long time Zeta products are perfect for Hunter Curve. I recommend it later when you sell it later. ...Powered by Google Translator
View detail
Small in size, but I like it.
It is small in size, but it seems to Guard tightly.
I personally like the Large size very much.
I don't think there is much in the way of wind protection in the winter.
View detail
Good atmosphere.
It is small but has a nice atmosphere. I don't feel any obvious effect, but it is better than nothing. View detail
I like the way it looks.
[How is it used?
I have replaced the Handlebar Cover on my DL1000 V-STROM250 with ZETA's ArmourGuard. At first I used it without Protector, but I decided to put it on. I did not expect it to be windproof or coldproof, so I decided to use this size, which is the smallest. The yellow color is slightly different from MotorcycleBody, but once you get used to it, you won't mind it.
View detail
CRF250L (MD47) and MATCH!
Installed on a ZETA AdventureArmourGuard (ZE72-6001).
[How is it used?
I use it for commuting, touring, and forest roads.
Was the one you received as per Image?
Solid construction. Can be used with confidence.
Was the installation difficult?
If you want to install it on ZETA's ArmourGuard, it's easy.
How was your experience with it?
It became my ideal CRF. I am satisfied.
The windproof effect is almost non-existent, so I think the Protector is a bit more Large-tiered for the cold season.
View detail
Attach to D Tracker
[How is it used?
Mounted on D Tracker; Armor Handguard Bend and Quantity:Set。
To protect your hands during motard race.
Was the one you received as per Image?
Color as per image (Red) I'm not sure if this is a good idea or not, but I think it's a good idea.
Was the installation difficult?
Installation is easy and can be done without any problem if you have a hexagonal wrench of the right size.
How was your experience with it?
The Armor Handguard is the smallest of the special hand guards that can be attached to the Armor Handguard, and it is designed to both protect the hand and reduce aerodynamic drag.
Compared to the discontinued X1 Protector, the size of the X1 Protector is larger and it has a little more resistance. I felt that it was a little resistant.
Compared to the XCProtector, the X2Protector has a smaller area, so it has less air resistance than the XC Protector.
As for Life, even though it was scraped by a fall, it didn't seem to break easily and I was able to continue using it even though it was torn to shreds.
[Included Parts:were they on?
Hexagonal Bolt
[Was there anything that disappointed you?
I was dissatisfied with the largeness of the X2 Protector compared to the X1 Protector. However, the Style of X2 Protector was much better.
[Notes]
This product is recommended for use in Motard races, but not for use in Touring Main. (including forest roads) If this is the case, I recommend XCProtector for hand protection and windproofing.
View detail
XCProtector. For those who want to install a Slim Protector rather than a
[How is it used?
I bought this because I installed something like Armour Hand Guard Bend on my KDX220SR and I wanted to put Protector on the real thing.
Was the one you received as per Image?
at first XCProtector. I was going to buy a Slim X2Protector. I wonder if it will be more light-hearted? I bought a new one here, and it was as Image.
How was your experience with it?
It's so cold in the winter months that it's pointless having it on, the wind hits both hands!
I'm sure it'll protect you from some of the boulders when you're playing in the mountains. I hope so.
[Points to note]
If you want to wear it as a cold protection, you can use the company's "XC-PRO Protector" Ya "Scudo Protector." I think it would be more effective to install the
Because it is slim, the guard range from boulders is also considered to be narrow, so choose the product that suits your purpose.
How did it compare to other products?
It is a story in ZETA, but Green Light is Lineup. XCProtector. When X2Protector. I chose the X2Protector for its looks rather than its function because it is the only product that can be installed on the Armour Hand Guard Bend.
0Other items that may be useful include
Point and hang of installation
If you are wearing a real ZETA Armour Hand Guard Bend, just install it with the 4 Bolts that are included.
In my case. "Armour Hand Guard Bend Wind." I replaced it with my own Bolt because I installed it in a crackle of a (crackle is 5mm Bolt compatible)
[Availability and clarity of the Instruction Manual
Quantity:Pair (for Left and Right) This kit includes the ProtectorBody and 4 bolts (screws?) for installation, no Instruction Manual.
[Notes]
I don't think there is anything in particular to pay attention to because it only sticks like it is supposed to.
[ITEMS TO BUY TOGETHER
If you already have an Armour Hand Guard Bend installed on your motorcycle, there are no special items to purchase.
It is a product that is assumed to be installed in Armour Hand Guard Bend system, so it is uncertain about other installation.
[Opinions and requests to Manufacturer
If it is a little cheaper, I can roll without hesitation... Please continue to sell Green Light for this product and XCProtector only!
View detail
apparent equipment
I used it on my CT125CT110 HUNTER CUB.
Because the size is quite small, the windproof effect in touring cannot be expected. I think that it is good to think as appearance equipment.
If you are a moped size, it is a good large size, balance is good and cool.
View detail
Sporty looking is good
It's fun to choose from a wide variety of Color variations to match your vehicle's body color.
It's not that expensive, and you can change it when you feel like it, or when it deteriorates due to a fall or something.
I tried to match White with Blue WR250R, but I did not feel uncomfortable and it brought out the Sporty Image.
I'm satisfied
View detail
Stylish in small size
It is used with Armour Hand Guard Bend and Armour Handguard PRO made by ZETA.
Until now, together with XCProtector, 4Quantity:I've just bought a set.
The following is the comparison Impression of XC and X2.
As for the size, it is smaller and more stylish than XCProtector.
However, the Cover rate that hides the Hand guard with Wound is high because XC is Large threshold.
It is the defensive power in the Off-road where Bush hits GunGun in the hand, but unexpectedly I felt that XC and X2 are the same degree.
Even the X2 protects your hands well enough.
On the other hand, if you get stuck, the Large Protector may get stuck on a tree or on the ground and become a hindrance in rare cases.
The XCProtector will interfere with the ceiling if it is not loaded in the middle of the vehicle, but the X2 will not interfere with the limit if it is a Full size Off-road vehicle and the standard RoofHigh ace is used in the Transporter.
I like the colors and the coloring, but the Material itself is not flexible enough to be worth mentioning, and it breaks rather easily when it falls over.
To put it in terms that Off car riders will understand. Rear Fender, which bends without breaking. It's not as flexible as it could be.
Therefore, when the size is large and the contact area when falling is large, the probability of cracking is higher for the XC than for the X2 of small size.
In Asphalt, it glides and scrapes away.
I didn't notice any difference in aerodynamic drag between the XC and X2 at legal speeds.
The highway is unconfirmed.
I think it will be a different comparison result when it becomes large like XC-PRO, but since it is too large and I don't like the appearance, I will buy X2 again next time.
View detail
ZETA for peace of mind
I'm very happy with the quality and fitting, I wanted something cool but not too large or noticeable. View detail
It's nice to have a choice of colors.
I'm going to put this on Green's AmaGuard.
I like the choice of colors.
I think it's good to have a variety of variations, such as one with a large area and one with a Flasher.
View detail
It's called a classic.
There are many variations of sizes and colors to choose from. To install it, just tighten the bolts. It's easy to install. View detail
Variation rich
I'm putting it on ZETA's ArmourGuard.
There are a lot of variations in terms of size and color.
It can be used for ime-Chain.
Just bolt it on.
View detail
Variation rich
ArmourGuard, the only Hand guard you can attach.
There were various variations of colors and shapes, and I was confused, but
It's not that hard to ride, so I decided to use Small's first one.
I'm very happy to have Green on Kawasaki.
View detail
many kinds
Installed on ZETA's ArmourGuard with a screw.
There are various variations such as Large size, so you can choose the one you like.
It's nice to be able to choose a color that matches the car.
View detail
Wow that's cool
I installed it the other day. I installed it together with the Hand guard of Zita.
It was just like Image without being compact and uncouth.
The Bolt of the mounting is Silver, so I think I'll paint this one soon.
View detail
I am satisfied
It's a good thing that you can choose from a variety of different types to fit your needs.
I like the variety of color variations.
I'm going to put it on their ArmourGuard.
BoltQuantity:It's easy to attach with 2pc.
View detail