Reviews
awesome!
Received the product in a big box with extra protection! Just fitted this on my SR400 and now it looks cleaner than before! quality is good and its easy to install too View detail
Hmmm, they're cheap.
The Fender Eliminator was cool and I put it on.
After installation, I didn't really notice it, but it looks very cheap. It is worth the price.
I appreciated the included Parts.
If there is something else you are interested in, that would be fine too.
If you are cheap and want to put it on anyway, it is possible.
View detail
Not as described.
I bought this product because it said it was compatible with the '91 D Tracker, but the position of the screw fixing hole does not match.
To be honest, it was a waste of time.
If you are considering this for your old D Tracker, don't buy it.
It's a bit of an inch.
View detail
The installation is a little Large strange.
The price is cheap, but the installation is large and strange. I would recommend this product to anyone who is new to customizing. View detail
Good vibes
I installed it on my 07 dTRACKER.
No drilling was required and Wiring was very easy as it can be popped on with the Coupler.
The Bolt that came with it was too short, so I bought another one that fits.
View detail
WirusWin no soil removal kit Japanese cars can also have a strong American style
The WirusWin soilless removal kit is suitable for Rebel 250/500 models, allowing the car to create a full visual impact of tires and show a strong American style after installation, but it will increase when riding on rainy days after removing the original wheel cover The possibility of muddy water splashing on the rear wheel, this is the only drawback that needs to be compromised to create a personal style! Recommended for you who like to be different! ---------------------- ------------------------ I bought their cycling jerseys before, and I recently planned to take a trip to a farther motorbike, so I bought a set of split raincoats for emergencies. The texture is relatively light and skin-friendly, and it does not take up space for storage. The back also adds a high-brightness night vision reflector, which greatly enhances the safety of night riding. The water splashing effect has been tried, and it is okay. The daily heavy rain should also be competent. Looking forward to the following Rainstorm riding waterproof effect! Powered by Google Translator View detail
Bracket cracked in a little over a year.
I bought SR400FI to use Fender Eliminator quickly and cheaply. I thought it was easy to install and seemed to be sturdy, but after a year or so, when I inspected the Number because it was shaking too much, I found that the Bracket part was cracked about half.
Even though it's cheap, I'm a little disappointed because I thought it would have a lifespan of about 5 years.
View detail
Fender Eliminator Kit
The SR Large Threshold OEM Rear Fender is now gone. View detail
Flaws not shown in the photos.
I bought this one as an experiment because I don't have a product detail picture.
Fender Eliminator, but it is unusually long and backward spaced, and the quantity:Pair (for Left and Right) It is very ugly with two Gold Bracelets in full view and full of gaps.
It's a shame because the quality and strength of the Bracket is solidly built.
I took it off immediately, put it back on NORMAL and sold it on Yahoo!
View detail
Inner is scuttling ・・・・・
Since the inner fender is removed, the inside of the tire house is not as good as it used to be, so I cut the Normal inner fender and put it on with just the included Bracket, License Plate Light and Reflector Bracket. Used.
Considering the inability to use the main plate and the processing of the Normal inner fender, the cost is not so good, so it is a little expensive, but it is a little bit more expensive than Quantity with Inner fender from other companies.:We recommend that you purchase the Set.
View detail
Bank of lodging money lost
As others have commented, with OEMSeat, I can't see the tail lamp hidden
I was forced to buy a new Seat or a new Fender lessKit for myself with this It is
View detail
Fits: SUZUKI RV200 VANVAN, SUZUKI RV200 VANVAN
Purchased for '16 year VANVAN 200' s Blinker relocation
When KIJIMA's Rear Carrier is attached to VANVAN 200, Rear blinker will be attached to the front end of Rear Carrier, but in this position relationship Blinker will be hidden when loading a wide package on Carrier : Universal Rear Blinker Bracket Plate etc) to try to relocate Blinker. As a countermeasure, Type of Blinker Bracket that tightens with License Plate (POSH Faith Posh will interfere with Fender's Black plaque part. In order to solve this problem, this product (Type : I purchased Lucas tail lamp none).
Although the wrong item reached the wrong size of the L-shaped Gold tool, we got the correct item promptly and got the normal item, and the transfer of Blinker was also completed.
Depending on the Engine speed, the License Plate will shake quite well, so in order of installation (At the moment, as the screw was tightened in the order of Fender Eliminator Kit - Blinker Bracket - License Plate, there was a gap of about 2 mm between the License Plate and the Fender Eliminator kick, which may be the cause of vibration) We will review and review the purchase of the back plate of License Plate.
In addition, Reflector is not attached to this product and will be relocated from OEM Product.
View detail
nmax fender eliminator
a simple model with stainless steel material.need expertise to cut and to snap fit on it.as you can see from the picture. View detail
Installation is easy
KLX250 (2013) I am using it. I did not like the OEM's covered Tail lamp I bought it. Installation itself is simple and no problem, Rose ish is also Cool installed figure.
The problem is Harness. The BlinkerConnector and the Tail lampConnector are tightly fit and are Snap and Ponding, but it is not structured like a waterproof mechanism like an OEM, muddy and water wound by the Tire hangs on the Connector as it is I will. As this is an off car, or Motorcycle as a large defect, wrapped in a Vinyl bag and wrapped a number of heavy black vinyl Vinyl Tape and processed Waterproof. It was a real situation.
And there is no angle adjustment function of License Plate. Let's not use the explanation sentence.
Also, the Tail lamp is dark.
This is something I want to do.
It seems that Kit is issuing various kinds of vehicles, so I think that development is also Large, but I wanted it to be a mechanism that does not involve water at all.
I'm generally satisfied with overall.
View detail
Surprisingly undesirable
Although it is the installation to D-TRACKER-X, the installation itself is very easy. However, since the Spacer moves around when it is installed, it may be better to fix with the appropriate Double-sided Tape.
Although the shape of the tail lamp is as shown in the image, it is different from the sharp impression of D tracker X and it has a round shape, so there is a slight sense of discomfort. Also, if you install it as it is, the tail lamp will be far away from the rear fender, so it will make you a manukee impression. In the attached manual, I ordered the spacer to be placed on the tail lamp stay, but by placing it underneath, the gap between the rear fender can be relaxed somewhat. Instead, it usually stops at a total of 4 points - 2 screws and 2 points - but the 2 inlays will float. If you are concerned about strength, you need to devise. Although we are ignoring, we can use it normally without strange blur.
Personal opinion, MOTARD's Style is not NG. Design has no sharpness. Also, if only the shape is similar, the goods are nearly half-price so it will be good there. I think that the Fender Eliminator Kit of DRC is more in the style of D-TRACKER-X.
View detail
Installation are very easy, connection just remove the original fender and unplug e signal lights also the down light needs to cut. Attachment either cut and twist or connect to a plug. Clean look and attractive. Brackets are very solid and finishing if i
Installation are very easy, connection just remove the original fender and unplug e signal lights also the down light needs to cut. Attachment either cut and twist or connect to a plug. Clean look and attractive. Brackets are very solid and finishing if its coloured and spray will be more attractive. Shipping are fabulously packed. View detail
Fender Eliminator Kit ...
I bought it because it was a Fender Eliminator Kit that I could install without removing RearCowl.
When trying to install it actually, the patterning paper used for Cut seems to change at discretion of the individual, so I had to open two holes for Bracket installation.
Moreover, I thought that it might be suitable for a person who wants to summarize in Beauty, such as installing Bracket also has a full look and DIY feeling strong, such as creating a gap between Number and License Plate Light.
View detail
It is unprocessed, and although it is attached, and I think that MSX is satisfactory, since there is the necessity of making processing or a Stay on one's own in attaching the Blinker of GROM, cautions are required.
It is unprocessed, and although it is attached, and I think that MSX is satisfactory, since there is the necessity of making processing or a Stay on one's own in attaching the Blinker of GROM, cautions are required. View detail
Although it was somewhat heavy considering the price, the Tail lamp Was also solid, was purchased and was good for it at splendid structure.
Although it was somewhat heavy considering the price, the Tail lamp
Was also solid, was purchased and was good for it at splendid structure.
View detail