Reviews
On the side cover.
I chose this one because the Bolt on the Side cover of WR250X was missing.
The color is beautiful and the installation is flawless.
View detail
To Accent.
I used it to install the MONKEY Chain Guard. It's a little Accent. View detail
Installed on Front Fender
Clean Anodized, quality is fine.
Even after long-term use, there is no deterioration due to UV rays.
I replaced it with a Front Fender Screw and it's nice and One point.
View detail
Installed as Screen bolt for Demon150GR
Replaced the Screen bolt of Demon150GR.
The OEM has an M6×12 SilverBolt on it.
Red alumite is installed to match the Graphic of the car body.
The Rider side of the four Screen locations is
It is mounted with a bare Flange nut and
Because the screw part sticks out considerably.
I'm going to process it and shorten it.
Flange nut is also OEM
Because it was Flange nut of Silver
DRC's M6Flange nut.
We are changing the color to Red.
You need to be careful with the two wires on the Headlight side.
It is also installed with OEM Flange nut.
Don't get sidetracked like I did and remove Cowl.
If you're thinking of replacing it as is...
CowlReverse from the side and hold it with your hand while you remove it.
Flange nut is going to fall off.
This is the future of Screen with Demon150GR.
You need to be careful when you make the exchange.
I'm writing this as a memorandum.
For the look from the Front.
It gave me a personality.
View detail
Installed on Demon150GR
I installed it on Demon150GR.
Originally, M6×12, which is widely used in Demon150GR, is attached.
Penetrating, because there is no particular interference.
M6×16 with this product.
Silver Bolt color to match the body.
I wanted to change it to Black color, so I exchanged it.
It can be attached to many other parts, but
Demon150GR is
There are some parts where OEMBolt's Clip is easy to come off.
After checking the installation status of the BoltReverse side.
Recommendation to install.
The Headlight side part in the second picture is
Because the Clip interfered with the Gap + the body.
M6×16 for DURABOLT Shoulder Bag
I machined it and shortened it to M6×12 which is the same as OEM.
The domestic motorcycle is not Gap, but Clip is inserted.
It is necessary to take measures such as pushing from the back here.
By using Bolt in Black, I was able to create a somewhat luxurious look.
View detail
Quality as expected
Unlike the previous Aluminum Bolt, it is strong enough to be used in various places.
Just be careful not to overtighten or prevent galling because it is aluminum.
View detail
Super lightweight and high quality!
It is very lightweight and has good color. It has a high quality feel and the price is very reasonable for this quality.
It is used in Large amount as Bolt for Cowl.
View detail
It's looking good.
The Ninja1000 is all about black, so I wanted to add red to the color scheme.
It is installed with M6×16? as a bolt to stop the Front Fender.
I've been referring to other people's imprints as well.
Because it's aluminum, you can't over-tighten it, but there was also a Torque designation, so it's safe.
BoltQuantity:The price is high for 2pc, but for a dress-up, it's a good and affordable option.
View detail
Rare Purple
I installed it in Chain guard of DJEBEL 250 XC.
I was looking for Purple to match colors with Rim etc, but there are quite a lot of Blue and Red..
Although it was expensive, I purchased it for Purple wanting it.
It is more like Red than Rim, but it is reassuring.
Strength is also hard to fade and performance is commensurate with price.
View detail
Aluminum BilletBolt
【WebikeMonitor】
I installed crops made abroad, but the strength was weak and I licked Bolt head
I replaced it with a product of Manufacturer that I can relax.
I replaced the Front fender 's Mounting Bolt.
With this you can ride with confidence.
View detail
Aluminum BilletBolt
【WebikeMonitor】
I bought overseas cheeps, but since Bolt's head has collapsed I exchanged it with a product that I can relax.
Tank installation part, Seat Cowl, Side cowl
View detail
Since the fitting volt of a Bikini cowl has been somber, it is used for a Dress-up up.The Gold is conspicuous and pleasing at the One point.
Since the fitting volt of a Bikini cowl has been somber, it is used for a Dress-up up.The Gold is conspicuous and pleasing at the
One point.
View detail