Reviews
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Clutch lever replaced at the same time as the brake
Like the brake lever, the clutch lever was replaced with a ZETA PivotLever.
This is also my favorite Lever as I have used it on my KLX230R and have tipped it over many times, but the Lever has never broken, and it feels better to operate than the OEM.
After the lever is replaced, the clutch cannot be cut without adjusting the play of the wire, but this can be easily adjusted since it is a wire type.
I prefer 3Finger, but CRF250L has a light clutch lever, so even 3Finger lever can operate the clutch easily.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Good product but shorter than I expected.
I like both the detailing and the look of the product.
But is 4Finger better for me?
It is about 2 or 5 Finger long when I hold it.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Quantity:Pair (for Left and Right) Not exactly symmetrical.
It will be much shorter when installed.
Clutch may prefer 4Finger.
View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
Test Ogawara
Test Ogawara View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
it attaches to Ninja250R -- it did! Attachment is also easy. Although appearance is also good, when it falls, in order to prevent a lever bending, the axis of a lever is working and this is effective. (When GOKE [ I / stood and ], only the abrasio
it attaches to Ninja250R -- it did! Attachment is also easy.
Although appearance is also good, when it falls, in order to prevent a lever bending, the axis of a lever is working and this is effective.
(When GOKE [ I / stood and ], only the abrasion of a lever is required by the favor which was functioning perfectly!) The rest is also good to be able to adjust the angle of a lever!
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
You can adjust it to your liking!
There used to be an inexpensive one at RoughAndRoad, but with an adjustable short lever. So it's almost a choice.
The lever position can be fine-tuned, so you can get the best position.
I think the shape of ZETA's Lever is good. ZETA is also made in China, but I think it is a neat product.
I think the texture is worth the price, but I wish there was an inexpensive Type for Short so it wouldn't have to be Foldable.
I think it will be the current form as Dress-up custom parts.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
New ModelCRF250L
Installed on New ModelCRF250L.
I was going to buy the DRC Short Clutch Lever, but all the stores were sold out, so I bought this product which happened to be in stock.
I was hesitant because the price was about 6 times higher, but it was the right decision here as a result because it was movable and would not break from the root even if it fell and it had a lever position adjustment mechanism.
When I installed it, I disassembled it and grease up all the moving parts, but it was applied slightly, so I think it is no problem to install it right after opening the package.
Although it is a product name of 3Finger, 2Finger is no problem at all.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
MOTARD, I know you're persistent about Motocross, but it's a zeta?
I chose this one for my 2012 crf250l to run on the Motocross course. zeta's Hand guard was also used in conjunction with this one, so this one may not have been necessary, but it contributes to the much more delicate Clutch meat compared to NORMALLEVER. They gave me. View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
I recommend Lever.
I changed the Clutch lever to ZETA's Pivot lever as well as the Brake lever on the KLX230R.
This one is also a 3Finger, so it's easy to grip even if your hands are Smallish, and the parts for Clutch's Switch are well included and safe to buy.
The texture is good and the Lever position is easy to adjust and it's a very good Lever.
I think you should adjust the play of the Clutch Wire after replacing the Lever.
View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
well-made
It's still a proper manufacturer's item and is well made
It's short, so it's easy to operate
I'm not sure if I'll be able to buy one next time, since similar inexpensive products are becoming more and more accurate
View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
Just fit!
Unlike general Retractable Lever, there is no Hinge in the middle of Lever, it looks refreshing and it is SMART.
You can adjust the Lever position in a stepless manner, and it is a Just fit at my favorite position.
If I had only ordered, I wanted Color's choice. Since Brake lever is Black, Quantity : Pair (for Left and Right) You can not see Lever's color is different.
View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
Casual presence
Quantity of index finger and middle finger : It is a 2pc operation, but it is mysterious what kind of way I did in the past
Clutch lever hit the sign, I got a ring finger caught. Because of that, I was thinking about exchanging for Short lever and purchased it as a result of the replacement of Motorcycle.
I was worried about the evaluation on the Net and I was worried about the operation of the Clutch switch, but it works quite unchanged with Oever Lever. Moreover, although the construction is also solid, there is no flashy in appearance, it seems to insist on existence casually, satisfaction is also enough. It is a product that makes it fun to operate.
View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
Surely it will not break even moss !! ...
Even moss will not break. Although there is almost no mistake, repeatedly overturning, the shaft hole becomes stupid and Lever rattles up and down. Care is necessary when the gap where Holder's Lever fits becomes wider.
I will not break, but it's rattling ..., how exactly will it be (Lol)
It would be great if shaft hole was Bearing type, at least Sleeve type ...
View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
Since the Hand guard containing a core is heavy off-road one, it purchases for a weight saving and the Lever breakage prevention by fall.If it says from the conclusion, and it becomes hollow, it will bend ordinarily.The Design and texture are
Since the Hand guard containing a core is heavy off-road one, it purchases for a weight saving and the Lever breakage prevention by fall.If it says from the
conclusion, and it becomes hollow, it will bend ordinarily.The
Design and texture are reasonably priced and good touch.
View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
It attached to KLX250 of 2012 models.When could be carried out, he wanted the Short lever made from a RALLY50, but since it did not correspond to Injection-ized KLX, it spurted and purchased this product.Since it is short-circuiting and adjustment of a L
It attached to KLX250 of 2012 models.When could be carried out, he wanted the Short lever made from a RALLY50, but since it did not correspond to Injection-ized KLX, it spurted and purchased this product.Since it is short-circuiting and adjustment of a Lever angle is also made to the touch which may be compared pure since it is a
3 Finger Type, it becomes easier to grasp..I think that result condition and texture have a thing more than a price.
It was thought wonderful that the Parts for corresponding to a pure Clutch switch was also attached again.
View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
Three are hung in two from usually, however since there is nothing, the Clutch lever of 3 credit is purchased! The character of ZETA minced by the surface of the Lever is very pleasing! By that of which can adjust the position of a
Three are hung in two from usually, however since there is nothing, the Clutch lever of
3 credit is purchased! The
character of ZETA minced by the surface of the
Lever is very pleasing! By that of
which can adjust the position of a Lever with the
Adjuster,
It was easy to adjust!
View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
I think that it is hard to use for who use by 4 fingers although for who operate with two fingers usually, it is recommended. I use for NINJA 250R. It is cool after all and oxidized silver is great.
I think that it is hard to use for who use by 4 fingers although for who operate with two fingers usually, it is recommended. I use for NINJA 250R. It is cool after all and oxidized silver is great. View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
Three fingers are used by D trucker 125. I can adjust simply and operativity became quite good. Attachment was done somewhat forcibly and the push rod of a clutch switch has been broken. It sometimes happen to Tiger and KLX125, please be careful.
Three fingers are used by D trucker 125. I can adjust simply and operativity became quite good. Attachment was done somewhat forcibly and the push rod of a clutch switch has been broken. It sometimes happen to Tiger and KLX125, please be careful. View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
It is used for KLX125. Although it is high, there is worth of that. Texture is also very high and an operation feeling is also good.
It is used for KLX125.
Although it is high, there is worth of that.
Texture is also very high and an operation feeling is also good.
View detail