Reviews
APE 100
Used for APE 100
TypeDMASTER is positioned in front of the
I bought it for adjustment because the Takekawa Clutch lever is later than the MASTER with Handlebar core.
The height is possible by adjusting the Mirror
Quite a bit of back and forth Quantity:Pair (for Left and Right) It takes a long time to match them evenly, etc., but there is no scope for compromise and self-satisfaction.
Quantity:Pair (for Left and Right) It is good if this price in …
View detail
No problem
The quality of the product was absolutely perfect. View detail
Cancellation, please.
I ordered the wrong one and I need a Cancelation. View detail
A little further out.
I bought this product because I replaced my mirror with a Short mirror and it was hard to see behind me!
Quantity:Pair (for Left and Right) I wanted to put it at a similar angle, but if you look closely, you can see that the mounting position is Quantity.:Pair (for Left and Right) I'm very happy with the way it turned out! I would have been happy if the Bolt that came with it was black, but it's still a Button type, so it's good!
View detail
High quality
It's a very elaborate and beautiful product for the price. View detail
Mirror View Widening to Large
A little more Mirror on the outside would have made it easier to check the rear, but it helps in those situations
Material:The influence on the Handling is small because it is Aluminum and Large and light
You can also choose two different mounting heights for the Mirror, so fine adjustment of its position is also possible
But the Bolt that comes with it is a bit cheesy
A low head Bolt would have looked much better
View detail
Rearward vision is now better
The Z900RSCafe is supposed to be a Short mirror than the regular Z900RS Quantity:Pair (for Left and Right) away
Therefore, rearward checks while driving are not required for Quantity:Pair (for Left and Right) I had to shake my head quite a bit at
When I was getting a reasonable amount of Speed, I couldn't get a glimpse of the eye feed and it was Stress
That's why the old-time flyers used to use short mirrors, and I've been using short mirrors myself mirror
But this time it's too short, so you can see your shoulders in the background needed
At first, I held back on the quackery, but the urge to get the Mirror out three more inches made me buy this one I did
Rearward vision is so much better and the visibility is a perfect balance
At first I thought it would be an inexpensive one
I chose this one by AluminumMachining because it is still a very visible place The quality is high and I am satisfied with it
However, this product is more expensive than MirrorBody, so the quantity:Pair (for Left and Right) It would be great if you could make it about $3,000 in
It's important to note that the Body is highly textured, so
Bolt is also included in Included Parts:I wanted to use the Bolt for something more substantial It was a bit of a struggle, but
What I found out at the time of the temporary clamping is that the Bolt for Mirror is a normal way to get Pitch It's not like Bolt's Pitch
The Bolt that I bought cannot use the Bolt that I bought with great effort, and it became a Waste use After all, I used the included Bolt
View detail
Goods are good !! But it is expensive
Quantity : Pair (for Left and Right) I bought minutes and it costs 4000 yen! I think that the cost is hundreds of yen.
The product itself is very good. I really regret that being high! I wanted POSH to work harder and cheaper
View detail
It's 3 centimeters long and 3 centimeters away
I only saw my arm until now, so I was thinking of Offset. Since it can move only about 3 cm with the Adapter attached, it was uneasy how effective it is until installation. I can see the backward firmly except for. Because it is expensive Parts, it was good not to fail.
View detail
I should have done it from the beginning
Neck was expensive everyone's impre street.
It's higher than popular Mirror selling here.
I purchased an inexpensive competitor OffsetHolder, but I can not move to the position I expected but another Size is already Quantity : I purchased 1 Set.
As a result, it is short and long in the belt...
I was able to install Mirror at the position that I thought to buy just one item of this product by any means.
A total of 4 items of wasteful company.
This Quantity : 2pc. It has become price equivalent to Set.
I feel that Design is also better to this person.
After all, the product to change Position is useless unless you have the adjustment function.
View detail
Although it is a slight Offset
I do not like the position of RightMirror of KTM EnduroR, I want to improve the visibility of the backwards.
Although it is only a small movement, in the case of my Motorcycle, the backward visibility has improved very much.
(Depending on the vehicle. I think there is LargeSmall for interference and improvement with the car body)
It is a long hole, but it can be firmly fixed.
It feels a bit expensive, but it's Cut-out so there's no choice.
View detail
The quality is good - - -
Although it is sometimes called Posh made, it is not bad about the quality aspect, but because Screw 's adjustment range of the car body side has been made wider, the Screw will loosen only by fixing the Screw head alone.
I think that it is necessary to bite Rubber Bush as a countermeasure and make it harder to slip.
View detail
I bought it for a slightly different purpose
I bought Handguard with Bracket I bought at Home center, but because the center of Hand guard and center of Handlebar do not match, I bought it for raising Hand guard with this Parts.
Although the purpose is different, Plating and finishing are beautiful and satisfied.
Mirror got somewhat shaky, but for Hand guard, Mirror itself is attached.
As Mirror got out a little before, I think that visibility has become narrower, but the impact is Small..
I think that Mirror's position adjustment can be used without problems.
View detail
Why is there - - -
I offset Mirror and did not want to raise the height as much as possible so I bought this product.
The goods themselves are good things and it was possible to install as intended, but for our YAMAHA car installation we need two kinds of Right Screw and Left Screw, naturally we purchased it like that, but the attached car body The side fixed Bolt shape is "Mushroom type" When "Horizontal Type" Different shapes of.
I thought which one is better to look at which one is better, but it seems that it looks a little too different - - - In that respect, ☆ I made one Minus.
View detail
I installed it to a SUPER CUB110(JA07). I installed it on both left and right side because I wanted to extend the standard plated mirror that already had long arms, vertically and horizontally to give it a classical style and to improve its view.M
I installed it to a SUPER CUB110(JA07). I installed it on both left and right side because I wanted to extend the standard plated mirror that already had long arms, vertically and horizontally to give it a classical style and to improve its view.
Mirrors usually don't look good when they're too long but I ventured and got what I think is somewhat like a Classic Vespa style. It has better view than before because it has extended both vertically and horizontally. (I do have trouble driving through narrow places.)
I ordered a plated one wondering why it cost so much because after all it's only a small adjustment part. But when I actually got it, I understood why. It has excellent texture.
But I'm replacing the red bolt cap because it doesn't match.
View detail
In order to adjust height used for the left-hand side Mirror of klx125 in which only the shoulder is reflected, it deleted by the Grinder, but paint application is also quite thick and decoloring also seems to be OK.
In order to adjust
height used for the left-hand side Mirror of klx125 in which only the shoulder is reflected, it deleted by the Grinder, but paint application is also quite thick and decoloring also seems to be OK.
View detail
Since he chooses with much trouble, he buys it, the form is pleasing and there were also no preparations in a not much big Mirror although what was necessary was just to have made it another Mirror which looks a little better, it decided to shift a fixing
Since he chooses with much trouble, he buys it, the form is pleasing and there were also no preparations in a not much big Mirror although what was necessary was just to have made it another Mirror which looks a little better, it decided to shift a fixing position and purchased.A place to regard as not moving a face until now could not be seen, and although it was slightly troublesome touch, it was considerably canceled because the position came out before slant.Even if it was running the high speed on the
Touring, it stops having been easy to be worrisome also on the mountain path.
View detail
Since back was in the situation which does not look good when the visibility of the back which looks at a Mirror was low, and its arm was considerably reflected in the angle of the Mirror even if it changed many things, and a face was not moved consid
Since back was in the
situation which does not look good when the visibility of the back which looks at a Mirror was low, and its arm was considerably reflected in the angle of the Mirror even if it changed many things, and a face was not moved considerably, [
]
the place about which it worried since a price became quite high although he thought whether like to improve it somehow, have inquired, change the main part of a Mirror, and to have been
--
-- when this product was found and having been compared with the main part of a Mirror, the price was also purchased from ending at a low price.
It is easy, put in in Spacer between attachment by the side of a Mirror and a Handle, and
attachment is as it attaches.
-- an important effect -- if it says, compared with the former, it can project outside 35~40 mm --
-- back came to be visible to exactly good touch, and there were effects of enough.
Without changing into an expensive Mirror, since the satisfactory result came out at the price of there there, it is
satisfaction.
For a
reason, it is * one Minus. [ which needed to prepare the Screw independently since there was no setting out
(there are goods of a reverse Screw) of the reverse Screw merely attached to its own Motorcycle as it is in setting out of specification ]
View detail
Since back could not be seen unless it shifted the arm, it attached for the improvement of a field of view. Since just beside [ ] is not made to offset, it is an Offset of about 25~30 mm actually. The Mirror has jutted out just before Handlebar-
Since back could not be seen unless it shifted the arm, it attached for the improvement of a field of view.
Since just beside [
] is not made to offset, it is an Offset of about 25~30 mm actually.
The Mirror has jutted out just before
Handlebar-end end.
In rearward visibility, at least
, however this became quite good.
The back can be seen even if it does not shift the
arm.
It is preeminent for the
effect.
The bull bull by
vibration does not improve as a
fault.
(Although it is natural ...) Since the
Mirror projects outside, the directions which carry out a pickpocket omission are cautions at contact.
a part to use it for the right-hand side of the
Yamaha -- one 1.5 times the price of this -- just for a moment ... I want you to make it the same as the left
View detail
It purchased in order to make it as legible as possible, since the Mirror was hard to see when the Bar handle was used and the Mirror was attached to the Handle. well -- a feeling -- it became legible.
It purchased in order to make it as legible as possible, since the Mirror was hard to see when the Bar handle was used and the Mirror was attached to the Handle. well -- a feeling -- it became legible. View detail