Reviews
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The effect was subtle for me.
"Separate handle for GSX1300R HAYABUSA." I told myself that I was going to be able to ride, but the position was just too tight...
I found a Spacer on sale, so I bought it to try it out.
I ended up with the Pipe Handlebar Kit.
It is relatively easy to install, but I didn't feel the effect on me. It's hard to say no, because everyone feels differently.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
very satisfied
Position of GSX 1300 R HAYABUSA is Position of Handlebar is far away. For that reason it was a difficult point to avoid Small circling.
There is also a problem of familiarity, but painting through the city is painful. Purchase trying to attach this product unexpectedly.
The result was correct. 1. Position change of about 6 mm did not expect much effect.
But it seemed like it was easy to install with other people's imprint so I thought about trying on it
I installed it. Certainly it was easy to install, I immediately went around the neighborhood. Honesty 1. The effect of 6 mm was licking. It was a mistake.. First I got easier feeling and I could afford it. The problem of feeling is great.
Because appearance also does not change, it was okay and I could afford around Handlebar so USBetc. Installation Space was born
Useful. There is no Minus element attached.. People who are interested are easy to remove, so just remove them.
I am individually satisfied with Large. By the way, I am a man of height 178 cm, 62 kg. My arm is long, too..
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Up without breaking OEM atmosphere!
If Handle position is hard, you can do it to Up Handlebar.
But, I do not want to break the atmosphere of OEM.
Just a little, the Handlebar position goes up.
OEM atmosphere is almost unchanged.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Slight improvement
It is a long distance Touring and the neck - A burden is placed on the shoulder, and it is installed in 14 GSX 1300 R HAYABUSA for improvement.
Installation can be done by an amateur if there is a proper tool.
After installation, especially trouble etc etc. There was not.
As imprint, I wonder if I got a bit easier.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Black busa - Custom
Three years have passed since I started riding the Black busa. Originally it was GSX 1300 R HAYABUSA of Separate handle after riding NAKED of Up Handle, and shoulder and back waist was back-up bucket until get used to. Though I got used to it for three years, I thought that Handlebar had a distant feeling and wanted a slightly better position. Just purchasing the same product as I was about to begin Custom.
I also exchanged footpeg for Rear Sets, and I realized that the real feeling of the effect is doubtful but it seemed that the spiciness that I felt was certainly alleviated. I do not know whether the effect of this item or the effect of exchange to Rear Sets, but also the response at turning has changed and there is a feeling that it became easier to swing.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
A hole - - -
Installation is easy and easy without difficulty.
When actually traveling, it is slightly forward misaligned degree.
"Camel Wa" Is not.
In my case, I have a sickness at the neck rather than a relaxation of the anteversion, so I want to lighten the burden even a little purchase.
Actually it is about 16 mm, feeling tired in the neck Left Release hands, raising your body feels a little but comfortable.
The product is only an Aluminum board because it hides under the OEM. But there is a change in OEMBridge.
First of all Cap of Cap bolt changes from Plating to Black.
, Bolt is Plating and Plating is visible from the gap, halfway.
I wanted Bolt to be black too.
Switch to OEMPlating cap at a later date.
The large hole in the Adjust hall of the suspension - -
It is the original hole for suspension adjustment, but the gap gets free with 16 mm Up.
Rolling up of foreign matter and abnormally conspicuous when feeling uncomfortable at the time of Riding.
The suspension adjustment, according to the day's Riding - - -
Unless it is not necessary, it is unnecessary and it is ugly.
I want a screwed cap attached to the tip of AdjustROD.
At the home center later, resin cap is stopped from the back, stop the Hot bond.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Takaka is 16mm Up - - -
There was a difficulty that we did not anticipate in the installation. M10Bolt nut of Handlebar Holder tightening up with Top Bridge, Quantity : Even with the Screw release agent Raspene, the permeability was bad due to the directionality of the Nut position, continuing to give Hammer shock to Wrench hanging on Nut and then getting off doing it. It's almost 10 years ago Motorcycle so it can not be helped.
After installation, urban area ~ suburb ~ mountain road 1. I tried a series of test runs for about 5 hours. I did not expect much, but I felt that my burden on the wrist and waist could be reduced by about 20%. However, it is also a fact that loads are difficult to somewhat appreciate on the front in mountain roads where the weight moves proactively, and FrontPre-road is set to 1 / I got a good feeling by pulling out about 3 graduations and making Pitching easier to go out.
In the item description Brake hose, Cable says OK as it is, because it was necessary to bring in some of them by drawing in them a little bit, because we needed a work to be affordable ★ We made four.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I got used to forward GSX 1300 R HAYABUSA.
To run normally, I no longer feel pain
However, it is painful only for UTurn to cut Handlebar to the full.
By attaching this, the change in posture at the time of UTurn decreased by the extent that the Handlebar got closer, so that UTurn can be done comfortably.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It is a large difference if there is nothing with it being.Although the Bar handle will be easier, a Separate-handle group will have only Colet.Unless it carried out with slouchy [ some ] a little, it could not kick in a load, but with my car body, it was
It is a large difference if there is nothing with it being.Although the Bar handle will be easier, a Separate-handle group will have only Colet.Unless it carried out with slouchy [ some ] a little, it could not kick in a load, but with my car body, it was required after
to exchange for the MASTER of a brembo.(It hit the Inner cowl, when there was nothing.)
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Fatigue had accumulated in a hand or the shoulder on the Touring for the GSX1300R HAYABUSA far a handle position and low. Attachment of this product was simply completed only by putting under a Handle, and operation became very easy although it was
Fatigue had accumulated in a hand or the shoulder on the Touring for the GSX1300R HAYABUSA far a handle position and low.
Attachment of this product was simply completed only by putting under a Handle, and operation became very easy although it was only 16 mm.
Although
Bar-handle-ization was also considered, a Separate handle wears a GSX1300R HAYABUSA exactly too.
He buys it and it is satisfactory.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I had you attach in a store. A Cable is OK with a NORMAL. There is also no contact to a Cowl. It is considerably effective although movement magnitude is slight. Immediately after GSX1300R-HAYABUSA purchase, although purchased to the tightne
I had you attach in a store.
A Cable is OK with a NORMAL.
There is also no contact to a Cowl.
It is considerably effective although
movement magnitude is slight.
Immediately after GSX1300R-HAYABUSA purchase, although purchased to the tightness of too much Position, that the Handle became this side especially a little had an effect in the degree of freedom of fatigue mitigation and a Riding.
When
, however mileage were got used to the GSX1300R HAYABUSA in piles, the still lower one thought that it was what is easy to take an inclined attitude.
Since a GSX1300R HAYABUSA has a place at which it turns as it lies down, if it lies down.
If it is
, however a Touring Main, its eyes will also become high, and I think that an effect is high.
View detail
It was attached to ZZR250. Although the cornering was a sense of ancillary handle with the center of gravity to the waist before (at the time of normal), the management at the time of a low speed became very easy. A posture becomes easy during a run and i
It was attached to ZZR250. Although the cornering was a sense of ancillary handle with the center of gravity to the waist before (at the time of normal), the management at the time of a low speed became very easy. A posture becomes easy during a run and it becomes easy to ride. Although I feel that the response of handling became a little bad, I make my own practice and correction of a peculiarity. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Although the hayabusa (2009 models) was purchased, what were felt first was the lowness of a handle, and far. Although he thought whether to get used and it had ridden as it is, since tightness was felt too, this product was purchased. A mistake i
Although the hayabusa (2009 models) was purchased, what were felt first was the lowness of a handle, and far.
Although he thought whether to get used and it had ridden as it is, since tightness was felt too, this product was purchased.
A mistake is made in becoming at least in this, although a handle only becomes high about 17 mm.
It has set to height just before there is no interference with a cowl.
In the direction thought that wearing is also easy and a handle is too low, it is very recommended.
View detail