Reviews
A manly rear view for better looks and better loading capacity!
When installing the touring net, it has to be hooked up to the Grip under the Cowl I was stuck
By installing the Tandem grip, you will be able to install it without interfering with the cowl and SeatBack is no longer Gap and its practicality has been improved
There was no complaint about BANDIT's rear view, but the Tandem grip I like it because it looks so much tighter now that I'm wearing the
Installation was crazy easy!
I'm going to install it with 4 Hexagon Bolt points, but I can easily remove the Rear Sets As in, pre-Quantity:I went with the Knob bolt for 2pc
There was also a review that the Screw hole is Gap, but my motorcycle has a problem There wasn't one! There may be individual differences
View detail
Nice and solid
I purchased this for my W800 Kawasaki as I found it difficult to manoeuvre in a tight space by gripping the existing passenger grips. The grip rail is nice and solid with a good coating of thick chrome. Installation was easy once I realised that the rear fender needed removal to access the bolts that held the old handles. The front of the rack sits inside the rear shocks bolts and it is further secured by a bolt that held the previous handles. Once in place and tightened it is really solid and gives a good place to grip when moving the bike in a tight space. I haven't tried it with a passenger yet but I am sure that it would be very suitable. View detail
tandem grip balius 2
arrive as estimated.The packaging are great and secure received my tandem grip as shown on the web, easy to install, it make the passenger of my balius happy.thank you View detail
Fits: KAWASAKI Estrella Custom, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA
Plating There was a defect
I installed it in FE of ESTRELLA.
Although there was no problem in mounting accuracy, many welding spatters adhered to the mounting part Color behind Left
A thing in a state where Plating did not go well was delivered.
I am compromised because it is troublesome to apply for exchange later than I realized, but I was disappointed at Manufacturer called HURRICANE.
It is very convenient when multiplying MSTAND attached with OP.
View detail
ST250 E Type Tandem bar
Packing It was good and it was solid..
When attaching, I had a hard time adjusting the Screw hole. When temporarily stopping Quantity : Pair (for Left and Right) You should do it at the same time.
Large is in active handling of parking.
View detail
It is the lowest item
I bought it as a special item, but I can not install it because the hole through which Bolt passes is not fitted.
The original Tandem grip was Large enough to make room for Bolt hole
Since there is no room at all for this product, Bolt does not pass because it gaps without matching with the mounting hole of Body at the time of the last Bolt.
Although it may be attached by applying the full force, the female Screw of Body will surely be damaged.
I can not believe that it is a special item. I think playing funny.
I think that it will be possible if you attach File and etc. and spread the Bolt hole
What Brown number is a special product that can not be installed unless it is processed here?
View detail
Even outside the Tandem grip
I installed it for the passenger under the name of Tandem grip.
Large is not too much, but it's not too small and it does not break Forme of Motorcycle.
Complete Bolt-on for installation.
TK of GK79A / Cut processing is necessary for MODEL before X model before 96 years.
It is convenient for handling when parking or hanging on a Center Stand.
Of course, it also contributes to Tandem.
Even if it fixes the touring bag, it also serves a role, so the usefulness of this item is high.
View detail
For SeatBack fixing
I bought it for fixing SeatBack of my wife's VTR 250.
It's nice looking but never a gaudy Parts, but there's no usability different from there.
I am satisfied with Large change.
View detail
Familiar surprisingly
It will become absolutely dasaware though it thinks w www and purchase it
Something went wonderful as expected against the ...
Thanks to the place to grasp, it became quite easy at the time of Maintenance
I feel a bit disturbing when wiping the Motorcycle - - -
View detail
I attached it to the DS 400
Speaking of American motorcycle, I think that there are many people called Sissy bar or Backrest. I liked this Tandem grip's compact and presencey looks and bought it. It is surprisingly conspicuous because there are also plating parts. I also thought that the sense of stability at the time of Tandem is good and that it is also excellent in functionality.
View detail
If it says, protection of the Tail lamp, for securing visibility
Installation of Y's GEAR's Fender Eliminator and Tanax's Camping seat bag 2 The Belt seems to be incompatible and the Tail lamp hid in Belt.
Carrier feels a bit loud and I tried to Grab Bar.
Since HURRICANE 's Grab Bar comes to the back of the Tail lamp, Bag can be lowered quite behind and Belt could pass sideways through Tail.
Seat which I felt narrowed became wider as I was able to lower Bag.
View detail
It was good to install.
It is more convenient for fashionability and handling than say for Tandem.
When I had a check at a dream store I bought for a new car,
If you ask and expect that it will install with Service
It was said that labor costs 4000 yen or more and it seemed to fall down.
Of course I took it home and installed it myself. (Lol)
View detail
HURRICANEHURRICANE Tandem grip
I installed it for the installation of Side bag and the installation of Hook of Touring net.
The installation method is very easy to remove Suspension and Blinker's Bolt and tighten this Grab Bar together.
Plating on the surface was beautiful and it seemed to be an OEM Product, it matched to the appearance!
In addition to achieving the original objectives, it is also very good as a grabbing place at the time of vehicle handling.
It is a product without complaint.
View detail
Since the Tandem grip was attached, management became easy.It plays an active part in a place with an inclination very.It is very helpful also when stacking a thing.
Since the Tandem grip was attached, management became easy.It plays an active part in a place with an inclination very.It is very helpful also when stacking a thing. View detail
This looks as good on the bike as it did on the web site, high quality and easy to fit, took maybe 30 minutes. very pleased and one happy wife!
This looks as good on the bike as it did on the web site, high quality and easy to fit, took maybe 30 minutes. very pleased and one happy wife! View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400
It purchased as a Grip at the time of a Tandem run. attachment has a place where a description is unclear in monochrome, and required time. The attached appearance was lower than expected Bar's height and smart touch. Since
It purchased as a Grip at the time of a Tandem run.
attachment has a place where a description is unclear in monochrome, and required
time.
The attached appearance was
lower than expected Bar's height and smart
touch.
Since he wanted to take out toughness, it bent forcibly and made it high later!
The raw material which the place to grip tends to hold is used, and it is good! When pushing the
Motorcycle back and there was a Grip, I thought that it was convenient.
Since expectation was differed from considering the
price, it is *** once.
View detail
After goods' arriving, since the Manuals were difficulties that monochrome and image quality understand explanation roughly although attachment was started instantly, it is *-1. The article itself is satisfactory and I also regard as goo
After goods' arriving, since the
Manuals were difficulties that monochrome and image quality understand
explanation roughly although attachment was started instantly, it is *-1.
The
article itself is satisfactory and I also regard as good attaching as
appearance serious consideration even in the direction by which a Tandem is not carried out.
View detail
It attached in the implications which increase a load credit place from the object for Tandems. Since the photograph of the description was indistinct, it was delayed a little. If it is you since , however an amateur like themselves also d
It attached in the implications which increase a load credit place from the object for Tandems.
Since the photograph of the
description was indistinct, it was delayed a little.
If it is you since
, however an amateur like themselves also did attachment, I will think whether it can attach satisfactorily.
It is
recommendation which I regard as the
goods themselves being high Cost performances.
View detail
[Webike Monitor] For the pearl-white vehicle of a B Style, since the Tandem bar was conspicuous in white, the Rear cowl exchanged and equipped black with the Rear cowl.VTR sharp [ the circumference of buttocks ], and lonely --
[Webike Monitor] For the pearl-white vehicle of a
B Style, since the Tandem bar was conspicuous in white, the
Rear cowl exchanged and equipped black with the
Rear cowl.VTR sharp [ the circumference of
buttocks ], and lonely --
-- it becomes a good Accent and comes to look greatly also from
back --
-- it is very satisfactory.I think that it is user-friendly that it
Is easy to have also as a
Tandem bar.
View detail
Fits: KAWASAKI Estrella Custom, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA
[Webike] Since the Tandem grip had almost hidden when attaching a Monitor Side bag, it purchased. Although the time of loosening that a Spanner does not especially reach the Bolt of a Rear-fender inner side easily about attachment was hard and su
[Webike] Since the Tandem grip had almost hidden when attaching a Monitor
Side bag, it purchased.
Although the time of loosening that a Spanner does not especially reach the Bolt of a Rear-fender inner side easily about
attachment was hard and suffered troubles, subsequent attachment and the Bolt bundle have worked to the Smooth.
Since the crevice between it and
standard Tandem grip is not so narrow, either, there is also no interference with a general-purpose Side bag, and a feeling of a Plating of the car-body rear was also raised.
Since the condition of the
Plating also suits the ESTRELLA well and the Volume of the appearance of the circumference of a sheet was also raised, it is large satisfaction.
View detail