Reviews
Fits: Others for Φ7/8-Inches Handlebar
Simple, beautiful finish and satisfying functionality
[How is it used?
When the handlebar on the VANVAN 200 was set back to NORMAL, the previous HURRICANEMTYPE 280mm did not fit the equipment around the handlebar properly, so it was replaced.
Was the one you received as per Image?
I think "Made in Japan" is not a bad thing. It is beautiful.
Was the installation difficult?
No problem. It is easy for anyone to install the parts by temporarily fastening each part and tightening them after installation. To prevent scratches, a thin cutting sheet is attached to the back of Brace's Handlebar Fixing Parts before installation.
How was your experience with it?
The L size 325mm was just the right size for the VANVANSTD Handlebar. The diameter was the same as the handlebar diameter, so it was easy to install TPMS, etc.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
I like "Made by HURRICANE" the best among all the handlebar braces available in the market. It is simple and beautiful without any length adjustment or fancy decorations.
View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR, Others
Attachment installation
I bought it to install attachments for navigation and helmet holders rather than reinforcing the handlebar. The compatibility was also confirmed on this site. View detail
It was short
I found this item, new and unused with exterior pain, at a used Parts store and purchased it.
I tried to put it on a WR250X that I replaced with a Taper Handlebar, but it was too short for SSize.
I use only Clamp and use Shaft as POSH.
I did not feel any vibration reduction.
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
I put it on my NC750S.
I had 5InchNavigation directly attached to the Handlebar, but decided to install this product when I replaced it with 7InchNavigation. I thought it would be a little bit in the way because the parking brake is located on the left side of the handlebar, but I was able to install the Limit.
7InchNavigation and a smart phone are attached to this Brace. 。 Large Navigation is now easier to see because it can be attached straight instead of at an angle. 。 Size is "S" 255mm.
View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
Used with GSF1200HURRICANEHandlebar
Vibration on the Steering is reduced. 22.2, so a Smartphone Holder or USBCharger can also be attached. View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
convenient in many ways
The price is a little high, but it is very convenient to be able to attach various things to Handlebar.
It looks beautiful and is a solid product.
It was easy to install
View detail
Extra thick!
I was looking for a Handlebar Brace to fix my phone on my VFR800XCROSSRUNNER 125 and I chose this one which can be used with the thick Pipe handle.
When running at a certain speed, it picks up the Gap of the road surface and the vibration is quite large, so I decided to make it as thick and firm as possible.
The result was perfection, the Klikka Phone Mount that I was using worked well, the vibration was not Large, and it was stable.
I felt that it was a little expensive, but it looks like it can be used for a long time, so good!
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
Scooter for commuting
I installed it after I replaced it with the HURRICANEHandlebar Kit. It looks much better. View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
It is in use with W800 after replacing EZ-FIT-Bar
EZ-FIT-Bar (For GSX 1400) It is in use at
I was worried about the Handlebar Brace from another company, but the beauty of Plating made me think about it I chose HURRICANE
The above EZ-FIT-Bar is Exactly 255mm size
What did I think of the installation? It's not very good It's not very good, I feel like it's far from the classical images of old cars I think it's a very good product But the product itself is good quality and good in my personal opinion
But it's Neck that's a bit expensive
View detail
Fits: HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 RS, HONDA FUSION, HONDA FUSION, HONDA FUSION
Hurricane Handlebar Brace Reviews
The model I ride is a 2018 cb1100ex, mounted on a genuine handlebar. By choosing the thickest thickness, we pursued a sense of unity with the handlebar. It is thick and sturdy, and it is easy to mount a guitar cradle or action cam. The classic look is a bonus! My model is a 2018 cb1100ex, mounted on a genuine handlebar. We chose the thickest thickness to pursue a sense of unity with the handlebars. Its thick thickness makes it sturdy and easy to mount on a guitar holder or action cam. Classic appearance is a bonus! translated by google translate View detail
Fits: HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 RS, HONDA FUSION, HONDA FUSION, HONDA FUSION
Hurricane handlebar brace review.
The model I drive is a 2018 cb110ex, and I chose the thickest type of handlebar brace. Most of all, I like the appearance that gives a sense of unity with the handle, and it is thick and sturdy, so it is quite easy to mount an action cam or a cradle. My model is the 2018 cb110ex, and I chose the thickest handlebar brace. Best of all, the handle and unity look are the best, and the thick and sturdy ones make it easy to mount an action cam or cradle. translated by google translate View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
You're glowing
A painful work scooter, SEA BASSCJ42A, which I installed in my 17th year of redecorating I got the HURRICANEHandlebar from We-Big and the Touring? Quantity:It is Pair The recommendation is MSize, but it seems to interfere with Brake master This time I used SSize255? I was troubled a lot I selected and erased and selected and erased View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
Handlebar's Small object mounting space increases
I wear SizeSS on CB 1300. Since it is the same thickness as Handlebar, Navigation and various Small objects installation Space will increase at a stretch, CB 1300 think that it is exact Size in SS. Helmet with Hel lock to prevent burglar is also perfect if you have Brace. Because it is Screw stop, there is no change in rigidity of Handlebar, it is a good feeling.
Although a gap can be delicately formed with Handlebar, is it such a thing?
View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
For Smartphone Holder installation
I thought that I used smartphones instead of Navigation and purchased 22φ Handlebar Brace.
Once I installed and ran, I got a little loose and so tightened up again.
View detail
Structure is solid, although the Place for one Inch handles does not have goods very much and a comparison is impossible.It purchased to engine fine oscillating mitigation and Navigation attachment.Since the thickness of a Bridge bar can therefore choose
Structure is solid, although the Place for one Inch handles does not have goods very much and a comparison is impossible.It purchased to engine fine oscillating mitigation and Navigation attachment.Since the thickness of a Bridge bar can therefore choose 22 mm of Holder relations abundantly, it is saved. View detail
A Main key and a Navigation are near, and since it is hard to carry out operation, the purchased Navigation for Motorcycles whose size of a Monitor is small unlike a car having become near with its eyes, and having become legible, and the Clearance of an
A Main key and a Navigation are near, and since it is hard to carry out operation, the purchased Navigation for Motorcycles whose size of a Monitor is small unlike a car having become near with its eyes, and having become legible, and the Clearance of an Ignition key can be taken, and it becomes easy to operate it. There is a profound feeling also in appearance. View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
Die length is seen and SS is chosen. Although it was satisfactory, when temporary doubling actually tends to attach, a Clutch, a Brake, and its Clamp part are near, and difficult for it. Since it will clamp into R portion exactly by a HORNET pu
Die length is seen and SS is chosen.
Although it was satisfactory, when
temporary doubling actually tends to attach, a Clutch, a Brake, and its Clamp part are near, and difficult for it.
Since it will clamp into R portion exactly by a HORNET pure Handle, position doubling is difficult again.
Nothing [ that it is expected that composition of a Clamp part is not improved ], when a rigid Up is expected, although the
attachment itself is possible.
Since
appearance was thick, it became good.
View detail
Fits: HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 RS, HONDA FUSION, HONDA FUSION, HONDA FUSION
It attached to the Handle of a HURRICANE. The touch after wearing is not uncomfortable at all for the same Manufacturer as the Handle. The place with which the Clamp of 22.2 Millimeters size can be attached is O.
It attached to the Handle of a HURRICANE.
The touch after wearing is not uncomfortable at all for the same Manufacturer as the
Handle.
The place with which the Clamp of
22.2 Millimeters size can be attached is O.
View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
The position was decided, and the thin Sponge sheet was attached to Pipe sidewall in tension about 10 minutes so that a crack might not be attached to a Handle. Since it is the Plating, it adapts itself to the surroundings and is the pure style.
The position was decided, and the thin Sponge sheet was attached to Pipe sidewall in
tension about 10 minutes so that a crack might not be attached to a Handle.
Since it is the
Plating, it adapts itself to the surroundings and is the pure style.
View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
SS Size was attached to CB1300SB. Attachment is easy, without removing the existing Parts. The texture of the neighborhood of the Handle does not change, either, but since it is almost the same as the path of a Handle, he has a feeling wh
SS Size was attached to CB1300SB.
Attachment is easy, without removing the existing Parts.
The texture of the neighborhood of the
Handle does not change, either, but since it is almost the same as the path of a Handle, he has a feeling which rigidity went up to appearance.
A feeling of
handle operation does not change and does not become the obstacle of extraction and insertion of a key, either.
View detail