Reviews
A must for Brake hose replacement
There are many other inexpensive Copper Washers available as Universal Products, but they are often slightly larger in diameter or of poor quality.
In this respect, the quality of this product is stable and the texture after assembly is very good.
View detail
JA55 Left hand Brake for mounting
It was used without any leaks.
The price is for 10 sheets, so you don't have to worry about failure.
View detail
Washer I use all the time.
It is used for GSX-R1100.
Often used for maintenance of Front brake, Clutch and Rear brake.
The relatively low cost and the choice of the number of sheets to purchase ensures that there is no waste.
I have used it many times now and have never had a problem.
View detail
It came with your new Banjo. (Lol)
It came with the new banjo bolt, but will be a spare. View detail
Crash washer
I used it to replace the rear brake line. It is ordinary, but it is BALIBALI for peace of mind. I use a solid product because it is a life-threatening part. View detail
Crash washer
I also purchased this product to replace the hose. It is a little cheaper than other products, so it is very helpful. View detail
Stable Crash washer
Quantity:1 Set of 100pcs. was not in store stock and was purchased from WeBig!
I can't store it in Large quantity like Motorcycle shop, so I use Active's Quantity.:1 Set of 100pcs. is so-so convenient
It seems to be sold in a limited edition in New color Crash washer!
I think I'm the only one in the world who can afford it.
If there is no resale of the limited time sale, Oidon had to buy it.
I'm getting excited!
View detail
Purchased as a spare for maintenance
Purchased as a spare part when changing the brake hose routing, etc. The washer is the same as the washer included with the purchase of the mesh hose and can be used with confidence. View detail
Convenient
Used for maintenance. When disassembling, it is essential to replace these parts, so you don't have to worry about stocking a lot of them.
It is a reliable Brand, so you can rest assured.
View detail
BrakeOH
I bought this because I OH'd my Brake.
No Fluid leaks, no problems.
It would be nice to be able to specify some number of sheets.
View detail
spare
I bought a 10-pack with a large number of sheets because I use a choice of spares and processing accuracy.
I will Repeat again.
View detail
exchange
BrakeMaintenance:Replaced together with field replacement. Since it is a consumable item, it is replaced periodically.:It's good that they are sold in sets. However, even if there are many of them, the selling price remains the same. View detail
Aluminum parts are made of aluminum.
The oil drain bolt is iron, and the washer used to be copper, but now it is aluminum. The oil drain bolt is iron, and the washer was copper, but I decided to use aluminum. It is softer than copper, so the crush is better, and it seems to seal better. View detail
Large doubles as Small
Because the number of pieces is unexpectedly necessary when the hoes such as Front and Rear are replaced, even 20 pieces are not a lot. It is not a part to be exchanged too often, but since Large also serves as Small, let's buy in bulk with room to spare. View detail
I can't start without it. (Lol) Don't be stingy
It's not crushable, but you can't be too stingy with it. View detail
Ordinary CrashWasher
It's a regular CrashWasher.
It is also called Gasket.
This Washer is made of copper and seals the Bolt seating surface by collapsing under the tightening axial force.
Since it is basically non-reusable, it is inevitably needed when loosening the part where CrashWasher is used.
The inner diameter is 10mm, so the size is used for general brake line.
There are two types of CrashWasher, aluminum and copper, but I personally prefer the copper one because it is easier to identify the CrashWasher by its appearance.
I've been using these for years simply because of their availability, and I've never had any leaks.
Because the damage when it leaks is extremely large and repair is troublesome, I think that it is better for mental health to use the thing of a famous place though the thing which is less expensive is seen here and there as for CrashWasher, especially when it uses it for Brake line.
View detail
Crash washer is the only choice.
[How is it used?
Since I changed the Master Cylinder of YZF-R25 used in the race to bremboRCS
Changed the Banjo bolt on the Master Cylinder side from 1.25 to 1.00 Pitch.
I used it in that case. The number of sheets used is two.
How was your experience with it?
Hose and Banjo are produced by ACTIVE, and I chose ACTIVE because they are Goodrich products.
It may not be a problem with otherManufacturer, but I feel confident that I can use it without any problem in outer diameter, inner diameter and thickness.
Note that due to the thickness of the Banjo bolt and the thickness of the Banjo, the thickness of the Crash washer that can be used will vary.
How did it compare to other products?
I would recommend copper over Aluminum, although it is a different product or Material.
If the aluminum is too corroded, or if you want to adjust it a little, you can loosen and tighten the Banjo bolt repeatedly.
This is because they wear out more quickly than copper ones.
[Points to note]
Nothing special, just note the Banjo bolt and Banjo's Size!
View detail
If the Banjo part is Aluminum, Material:Use the Aluminum Washer!
If Active's ACPerformance lineHose is Aluminum Banjo, Washer is also Material:Use Aluminum. View detail
Copper Washer for DAYTONA High spec line Brake hose
I use DAYTONA High spec line brake hoses for my motorcycle and my motorcycle buddies brake hoses, and I think Copper Washer is good because High spec line Banjo is Steel. I have been buying Copper Washer only for many years. View detail
I want to keep it on hand
Any manufacturer's Washer will do, but I chose Active's because of the AC PERFORMANCE fitting.
Because it uses seven sheets at a stretch when the maintenance of Caliper is done before and after, I want to keep it always in a lot.
It's a very common Washer, nothing to write home about.
(Not in a bad way, mind you.)
I can seal it normally and it is enough for my needs.
View detail