Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

Brake Switch Clear all

NTB

04 Aug 2023

Brake Switch

Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA XR50 Motard (MOTARD), HONDA XR50 Motard (MOTARD), HONDA XR400 Motard (MOTARD), HONDA XR400 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard, HONDA XR250, HONDA XR250, HONDA XR250

Japanese Webike user

4/5

NTB FrontStop-lamp switch for HondaDREAM50.

I have always found NTB products to be inexpensive and of high quality, so I ordered from them again,

The signs speak for themselves." This is what I mean,
I realized that NTB's products are nothing less than OEM parts, View detail

NTB

17 Jul 2022

Brake Switch

Fits: SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI WOLF 125 (Wolf), SUZUKI Volty typeT, SUZUKI Volty Type T (Volty Type T), SUZUKI Volty typeI (VOLTY Type1), SUZUKI Volty typeI, SUZUKI Volty typeC, SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 125 (VECSTAR), SUZUKI VanVan 200 (VANVAN), SUZUKI VanVaN 200Z (VANVAN), SUZUKI VanVan 200 (VANVAN), SUZUKI TL1000, SUZUKI TL1000, SUZUKI SV400, SUZUKI SV650, SUZUKI SV400

Japanese Webike user

5/5

Purchased as Repair Parts Stock

I bought it as Repair Parts stock. stop switch is suddenly ruined, so I stock it. View detail

NTB

21 Nov 2020

Brake Switch

Japanese Webike user

4/5

It's okay, I think.

Has the stop-lamp light been unstable lately? I checked to see what it was, and I suspect it's the Switch or Wiring area of the front brake.
It seems that there is no problem in the energization of the wiring, is it made by OEM Alps Electric? I ordered it to see how it works because the Switch of
The next day it arrived, I was surprised, when I replaced it, the problem was solved at once.
The difference between the OEMSpec. and the OEMSpec. is that the parts around the terminals and near the terminals do not seem to be waterproofed.

If it is used as it is and there is a problem, it will be disassembled, and the contact point and the energizing part will be cleaned, and I think that Maintenance will be done.

When energizing and investigating this time, when lighting is unstable, first of all, it may be the best to suspect Switch, when it is Single Body without installing Switch, it lights without a problem, but when I operate it after it is installed and fixed, it does not light, it blinked and became unstable.
Later, I disassembled the OEM, but it seems to be a distortion of the contact point or inaccuracy, and it depends on a slight angle of Lever to energize or contact failure.
The original installed OEMSwitch is not reusable for safety reasons.

I have experience with malfunction from dirt and degradation carbonization of contacts, but it is the first time that contact failure occurs from a slight distortion of Case or current-carrying parts.
It often revives when I polish the contact points and the energized parts and put them back together again, but it is a part that needs to be operated reliably. View detail

NTB

20 Aug 2020

Brake Switch

Japanese Webike user

3/5

Not good

It stopped working about a month after the replacement.
Phenomenon:Stop-lamp is still on even if you don't hold Lever.
It seems to have developed a sticking inside. Lubrication did not improve it.
Well, I've been storing it outdoors with a Cover, and I've been hit by rain a few times … View detail

NTB

04 Aug 2020

Brake Switch

Fits: HONDA HornetCB900F (Hornet), HONDA Hornet900 (Hornet), HONDA CL400, HONDA CBR929RR, HONDA CBR600FX, HONDA CBR600FS, HONDA CBR600FR, HONDA CBR600F4i, HONDA CBR600F, HONDA CBR1100XX, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA CB400 SUPER FOUR (Super FOUR), HONDA XRV750, YAMAHA XJR1300, YAMAHA XJR400RII, HONDA CB1300 SUPER FOUR <ABS>., HONDA CB1300 SUPER FOUR <ABS> (SUPER FOUR), HONDA XLR125R, HONDA XL1000V, HONDA XLR200R

Japanese Webike user

4/5

Ordinary Switch

It was broken before I knew it, so I replaced it. Normal Switch with nothing of note at all, thank goodness it's inexpensive, nothing to write 60 words on. Normal. View detail

NTB

10 Jun 2020

Brake Switch

Japanese Webike user

4/5

OEMParts same etc

After 20 years, the Brake switch has been extremely malfunctioning and seems to have reached its limits, a few years ago It was repaired in sections, but the contact point also deteriorated I gave up on the repair
This time I tried to change from OEM parts to the same etc. parts for the first time, but there was no problem in installation and operation I think it's almost the same as OEM, it's not obvious from the look of it, and the contents and cases are not different from OEM You can expect the durability of the OEM same
The price is also less expensive than OEM, and the parts are very complicated to disassemble and repair These parts are very useful and helpful in cases where there is a need to have the car inspected and serviced Savior PartsManufacturer
In addition, you can use CokingSeal agent near the case matching surface for moisture-proof measures Treatment
View detail

NTB

06 Jun 2018

Brake Switch

Japan User(translated)

3/5

Used for Rear SetsRear brake

Originally used for Front brake lever is Bolt On so ginger
Improved Rear brake on Rear Sets and installed it.

Durability is a problem, but the price is cheap so buy again if it breaks. View detail

NTB

27 Apr 2018

Brake Switch

Japan User(translated)

4/5

Nice

In that era, I am satisfied with this price
Alone
Thank you, even if it is told that more
There is no doubt about satisfaction
I wonder how much quality you have,
It is satisfying if exchange is OK

It is easy to install. However,

View detail

NTB

17 Apr 2017

Brake Switch

Japan User(translated)

4/5

Almost satisfied

CBR600RR (PC 37 latter term 2005 year) It attached to. I swapped it for 12 years because it became useless.
I thought that the product was the same as it was originally attached. (Maybe you just did not notice the difference)
Behavior also works without problems so it was good. View detail

NTB

20 Feb 2017

Brake Switch

Japan User(translated)

4/5

Exactly

I thought that the Front brake's switch is exclusive, but since the shape was similar, I purchased it and installed it Just size. It works without any problem. View detail

NTB

08 Nov 2015

Brake Switch

Japan User(translated)

5/5

Cheaper than OEM Parts Number

Since the Brake lamp of the Front brake has stopped running, it will be replaced.

Just Wie Big was in Sale, so I was able to purchase it cheaply.
The shape was the same as the OEM Parts Number that was originally installed, and the price was cheaper than the OEM Parts Number.

We have stock in Big, so it arrived immediately at hand.
Parts exchange was done soon. View detail

NTB

22 Sep 2015

Brake Switch

Japan User(translated)

5/5

It is convenient because you do not need to check the OEM Parts List

Purchased parts on image and existing parts below image.
No problem in shape and texture. The result of action test is also the same.

There is no time to check the inventory of ProductNo of the Parts List (Careful one may be better checked). It was very convenient because it can be purchased.

I do not know Cost performance because it does not check inventory of OEMParts. (I do not know whether Parts will come out. )
I feel like a reasonable price. View detail

NTB

05 Sep 2015

Brake Switch

Japan User(translated)

3/5

It was an initial defective item

Since the switch originally attached to KLX 250 has become unstable due to poor contact, exchange with the same one.
After installing and checking the operation, running to the nearby Convenience, I got Lever but got stop-lamp.

When I removed the Switch and disassembled, the inside board Spring was broken.
As Manufacturer adopted products are reliable I think that Regular's initial defective product.

Since it can not be helped, I purchased another one.. View detail

NTB

11 Apr 2015

Brake Switch

Japan User(translated)

4/5

Mounting on APE

I diverted the Master cylinder of NSR 50 when making the APE disc, but I bought this product because the Brake switch was broken.
It is a matter of concern that the gap is empty, but since it is a difficult place to see it, there is no problem as the Stop-lamp goes on. View detail

NTB

16 Oct 2013

Brake Switch

Japan User(translated)

5/5

The Stop lamp of a Front brake is a substitute from a point or the original manufacturer's product of lost
kawasaki250TR.I think that it is worthy of regarding it as mist in
price although exchange was challenged by itself by
useless origin.*
which the
result is bingo as a cause, and was exchanged and repaired -- I am dramatically glad if there are models of the
complete range also including an old vehicle type or all the Manufacturers I praying. View detail

NTB

02 Aug 2013

Brake Switch

Japan User(translated)

5/5

Since the portion of the pure terminal had broken, it exchanged. Attachment was also immediately broken by the almost same structure with it being pure.If this Manufacturer has the same goods as brand-name parts, I would like to use here, since s

Since the portion of the pure terminal had broken, it exchanged.

Attachment was also immediately broken by the almost same structure with it being pure.If this Manufacturer has the same goods as brand-name parts, I would like to use here, since structure is also solid at a low price rather than he buys

brand-name parts. View detail