Reviews
Lightweight Compact
I had been using an ordinary ram-mounted Arm, but when I transplanted it to the FairingBracket from its previous mount on the Handlebar, the length of the Arm became an obstacle to handling, and because it was heavy, the angle of the Arm sometimes changed due to vibration or shock. The length of the Arm was an obstacle to its handling.
That is why we changed to a short arm. The short arm is lighter than the short arm, and it also reduces the load on the base.
View detail
Robust retention and mysterious unity
[How is it used?
Quantity of about 8 years and 80,000 km (YZF-R25, 10,000 km in half a year, the rest YZF-R6):2pc. Use Set
Installation:All of them are installed by building a base on the handlebar, R25 with Nisshin Mirror Holder, R6 with CF POSH Mirror Holder (https://www.webike.net/sd/1125900/) and YAMAHAOEM Parts (https://www.webike.net/sd/1125900/) with M10Ball (https://www.webike.net/sd/1125900/) and Short arm (https://www.webike.net/sd/1125900/). R6 is equipped with CF POSH Mirror Holder (https://www.webike.net/sd/21313052/) and YAMAHAOEM Parts (https://www.webike.net/sd/25729937/) with M10Ball (https://www.webike.net/sd/24021956/) and short arm (https://www.webike.net/sd/21313052/). Short arm ()
Equipment used
Xperia 5 I don't even remember because I have no records before and I wasn't really interested in smartphones.
1. Xperia 5 (docomo) approx. 2 years
2. Galaxy S21 (docomo) about 1 year
2-1.DriveMan BS-8 (https://www.webike.net/sd/23219567/) parallel operation
3. Xperia 5 iii (simFree) about 1 year
4. Pixel 7 Pro (simFree) approx. 1 year
Was the one you received as per Image?
Simple look and somewhat rough information as per Image
Was the installation difficult?
Once the ball of the base is fixed, Arm components can be tightened and loosened without the need for tools, making them easy to use.
However, the Handlebar is used with the smartphone attached to the Quantity:Pair (for Left and Right) It is necessary to check the interference with the Screen, etc. by cutting the screen in half, so it is necessary to check after attaching it.
How was your experience with it?
Even after fixing, some Quantity:Pair (for Left and Right) There is some play in the rotation of the wheel, but it did not rotate while running and did not cause any problems in use.
Although it is not known whether the Smartphone and Camera we used have optical image stabilization, we have never experienced any problems with the Camera.
I have never had a phone fall off without the rubber claws, though. It is just meant to be a precaution.
The rubber part alone can be replaced, and the color can be selected from three colors (https://www.webike.net/sd/24186773/), so the expense is modest when deterioration is somehow a concern. Adhesive also included.
Since it is clamped by four claws, it is necessary to pay attention to the position of the Button (dedicated to Camera of Xperia or Action of iPhone 15Pro) if it is located on the edge of the Smartphone. (I mean, even the Pixel7Pro with two buttons on the Right Side sometimes pressed them.
The size of the gold part of the OEM mounting base of the Driveman BS-8 (also 10) and the gold part of the center seal of this product when the seal is peeled off are brilliantly the same, and when the gold part is disassembled with appropriate double-sided tape and transplanted and attached, it becomes a much sturdier and more robust mounting base than the BS-8's optional Handlebar Mounting. The Mount base is much sturdier and more robust than the BS-8's optional Handlebar Mounting. (It is also possible to clamp it with a nail to further increase stability.
I think I gave up on Seal because its texture is similar to that of YAMAHA's tuning fork Sticker, and it looks similar but slightly different in Largeness.
[Included Parts:were they on?
No Instruction Manual or any other instruction manuals are included in the product images.
[Was there anything that disappointed you?
Nothing special. However, I would have been sad and run to SYGN HOUSE if I didn't know that it was made in the United States and used by the military, but that it was not so particular about the appearance of the product.
Originally, we had used a holder composed only of resin from Miknowla, but the time and effort required to attach and detach the Smartphone was far less. Also, the claim that it is also used by the military made me feel more secure on my motorbike, which has a lot of vibration.
I have never encountered any image stabilization problems, and would have continued to use this product if there were not more Buttons on the Smartphone side.
View detail
If there is no reason, this" is" good.
[How is it used?
About 7 years and 70,000 km
XGrip for Smartphone to attach Smartphone and DVR
Mounting points are around the handlebar
Was the one you received as per Image?
Simple package, somewhat rough product as per Image. I would like to say that it is heavy, but it is heavier than I had imagined from the fact that I had heard that it was made of aluminum and from the appearance of its small size.
Was the installation difficult?
The OEM Knob is simply loosened, inserted, and tightened.
If theft is a concern, SecurityKnob is available, but it is a bit bulky.
It is possible to use an Inch size nut to secure the Merit, which can be loosened and angled without the need for tools (use the nut for installation. (Use the Nut for installation, but do not over-tighten it.)
How was your experience with it?
Compared to the standard arm (https://www.webike.net/sd/21313050/) and long arm (https://www.webike.net/sd/21313048/), there is no Spring inside, but it has not come loose or come off.
Since it is the shortest Arm, I thought it would be the least likely to cause a sense of mess when attached around the Handlebar. The support length is also shorter, so it is somewhat safer.
The short length of the cable makes it less flexible. However, the position of Charger was originally taken into consideration, so there is no particular impact.
The lightest Arm components except for those with different materials
[Included Parts:were they on?
No particular product only.
[Was there anything that disappointed you?
Nothing special. If I had to say, it would be nice if Bolt wasmm Size, but there is no problem if you don't change it from the original parts.
Quantity:If you want to buy this product, you need to purchase it from RoseRose because the Set comes with a standard arm, but unless you need a standard or long arm for height or position reasons, I feel that this product is the one to choose if you are looking for lightness.
View detail
I didn't use it right.
It was attached to a steel Fuel Tank and used as a base for a Phone Holder, but when running on a day with a high of 40-Degrees, it tore from the border of the inner Gold genus. It seems that the heat softened it and it could no longer support the weight.
"Must be used indoors/inside a vehicle." I'm not complaining because I used it on an unusually hot day when it says, "I'm not complaining, but just FYI.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Cospa is good
Smartphone Holder is using RAM Mount.
This type is the best looking and the best way to fix it without getting in the way, so I use this type for all my motorcycles.
View detail
It's a bit expensive
I want to mount my phone in a position where I can see it easily on my Racer9GT, so I have a FairingBracket installed.
However, the bar to mount is 12mm, which is considerably slimmer than a handlebar, so I had to use a regular mount base with a Gon Seat or something like that, but I found a product that is perfect.
It was originally designed to be attached to the bar portion of Mirror, but the size was JUST right. Spacer also comes with several sizes to fit various sizes, so it can be used for other purposes.
The Base that originally came with the RamMount was ported to the other Motorcycle, so the Arm and Body can be used.
Still, this price seems high for Base alone, but...,
View detail
ease of use
[How is it used?
City driving and touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
good
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Only Ball can buy it.
Only the Ball portion has become saggy.
I only bought this one because Bolt is still available.
Webike is kind enough to buy only here.
View detail
ease of use
[How is it used?
City driving and touring
Was the one you received as per Image?
Yes
How was your experience with it?
good
[Points to note]
None
How did it compare to other products?
I've never used any other Manufacturer.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
tightly packed
It can be mounted most securely in any way.
Honestly, I think it's expensive, but it's a good deal because you don't have to worry about it because there are so many different types of Mounts to choose from.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
It is quite a nice attachment!
These parts replace the bolt for the Handlebar Clamp and allow the RAMMount to be installed.
I am in this state of attachment (⇒ see photo).
It was quite a challenge, but I like the way it is attached to the handlebar and it does not affect the handlebar easily.
This will be useful for attaching a smartphone or Radar or something.
View detail
That it is a lightweight MODEL of the same SERIES!
It's hard to see in the picture, but since the style is to attach directly to the Handlebar Clamp, we wanted to make it as light as possible. PlasticMODEL." The Company has changed the name of the company to
In terms of the Short Type, the shape is exactly the same as that of the Gold Model, so there is no problem, and it was installed successfully!
It worked better than expected, it's perfect!
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Essential Items for attaching the Smartphone Holder to the ZX-10R.
Essential Items for attaching the Smartphone Holder to the ZX-10R.
The installation itself is not so difficult, but the Screw where it is attached is special,
It is impossible without a proper Torque wrench.
[Maybe it's just the '24 model, but...]
It also requires a locking agent, so at first glance it looks like it can be popped on, but to a certain extent it is.
Tools and equipment are sometimes necessary.
I've only been using it for a short time, but the RAM Mount system is just as good. Durability is for sale,
It is safe in the knowledge that it will not break that way unless it is defective in the initial stages.
View detail
very strong
I installed the Ram Mount M8 bolt holes with 1" ball directly on the handlebars of Ducati StreetFighter 1098S. I installed the Ram Mount ball with M8 bolt, bolt holes made from aluminum so it's very strong. View detail
For Fat bar
[How is it used?
I purchased this product to install Gopuro on my Fat bar.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Just sandwich it between Screw and Nut, but in the case of Fat bar, since it is 28.6Size, sandwich the collar that comes with it.
Both Screw and Nut are small, so be careful not to lose them.
How was your experience with it?
It is just the right Size so it fits securely.
[Included Parts:were they on?
Size adjustment collar is attached.
[Was there anything that disappointed you?
I think it would be easier to use if it were more Compact, but it is good because it is durable.
View detail
It's easy to use, but it's a Large size.
[How is it used?
I purchased this to mount my Gopro.
Was the one you received as per Image?
It is standard, but quite longer than the Image.
And it is quite heavy.
Was the installation difficult?
It is easy to use because you just turn the handle to loosen it and insert the ball into the loosened part. However, when I loosened the Dial too much and it came off, parts were scattered.
Please be careful not to loosen it too much.
How was your experience with it?
It is long but easy to use because of its flexibility.
[Included Parts:were they on?
Instruction Manual。
[Was there anything that disappointed you?
I wish it was a little lighter and Compact. It's a bit tough on the half side, so which would you take?
View detail
Usability is good
[How is it used?
RamMount for GoproCamera shooting on Fat bar's Road motorcycle.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is attached in the same way as a normal go-promount, so it is simply attached with screws.
How was your experience with it?
With other GoproMounts, the height was not high enough for the handlebar, and it was hard to see the front of the camera.
The RamMount has a standard setting and was easy to install without having to think about how to install it.
[Included Parts:were they on?
As shown in the image.
[Was there anything that disappointed you?
Neck is a bit pricey, but it is easy to use.
View detail
Good camera mount, high quality that lasts!
The RAM Mounts designed for the GoPro do not come with the GoPro thumbscrew or the stainless acorn nut as depicted in the photographs. Instead, they ship the GoPro adapter with a nylock nut, a tiny machine screw, and a washer expecting this to be used in lieu of the GoPro thumbscrew. One can easily re-use their thumbscrew, but the Acorn nuts have to be swapped over from leftover GoPro mounts or purchased, but they are not retained in the RAM GoPro adapters! This allows the nuts to be easily lost. The rubber balls on the RAM mounts combined with the stout center assembly are the biggest selling points of the RAM mounts. It puts the other brands to shame! However, I am not a big fan of the sheet metal screws used to attach the ball assembly to the base. I could understand if it was lean manufacturing to reduce the number of specialized adapters, but almost all of the RAM mounts use the ball assembly. It would have been more secure and practical to produce an integrated ball assembly for each of the bases. That way I could still swap between mounts but bypass the need for the 2 sheet metal screws that could strip out the plastic or fail over time. I would have liked to see the ball assembly integrated into the suction cup mount. I also would have liked to see the thumbscrew included, or at least provide an acorn nut or nylock nut that is retained in the plastic GoPro adapter. This way the end user can simply reuse the GoPro thumbscrew without digging around for extra nuts. The machine screw included with the RAM mount is a smaller diameter that isn't as secure as the GoPro screw, and as a result the included nylock nut (which is too small to retain in the housing anyhow) has a smaller thread diameter that does not allow the use of the GoPro thumbscrew. It's almost as if RAM designed the GoPro adapters as a secondary after thought. I do like the twist lock suction cup mount. It provides a sturdy camera mount on glass or smooth surfaces, and the double socket arm is very secure and adjustable. Overall: 4/5 stars. I don't like how RAM included the GoPro adapter without proper hardware. The use of sheet metal screws to secure the ball assembly to the base is also cheaply done. It should have been integrated from the get-go and still allow for lean manufacturing principles. Otherwise it is a very solid mount. View detail
stable and without shaking
I put RAM MOUNT Gopro ball mount 1" and RAM Mount short arm palstic in the DJI action camera and installed it on my Ducati StreetFighter 1098. During driving the RAM MOUNT is very stable and without shaking. View detail
Think of it as a consumable item, maybe once a year.
The Hold feeling is excellent.
I have Rubber's Strap on just in case, but it's so good that it doesn't seem to fall off without it.
This is the third one I've bought, and within a year the plastic part in the middle comes off, it gets rickety, and one of the four holds falls apart….
Spare Parts is also available, but we end up replacing it.
The fact that it is so appealing that I keep using it because I can't find any other good product!
View detail