Reviews
The texture isn't bad.
I had to use a tool to adjust the angle of the Mirror, so I removed it immediately…
The thing itself is not bad. It's just that it didn't suit my usage.
View detail
Installed on TOWN MATE 90
The OEMMirror was a little wider and easier to see, but it broke, so I bought it.
First of all, the vibrations don't make it hard to see.
Plating, clean, and rust-free.
It is almost impossible for it to shift as it is fixed by screw after adjustment.
View detail
When in doubt, Thanax God
This is what the best Mirror is all about
I installed it on two cars in total, TW200 and CB400SF Tanax Napole OnTrad mirror
[Design]
Personally, I like this unassuming Mirror by THE Royal Design very much!
Among them, this Mirror has an exquisite Bracket thinness
MirrorBody is also thin, small type and stylish
And all of those elements are made with a nice saltiness that feels like it doesn't interfere with visibility
That's what Tanax is all about
[Visibility]
Unlike OEMs, it's a pretty small type, so some people may be concerned about it It looks better than I thought it would
My impression is that it looks like the OEM equivalent of an OEM
The TW200Level's vibration was no PROblem
There's a little bit of Garbage in the cheap ones, where the vibrations blur and you can't see anything in a certain rotation range There is, but it wasn't like that
However, the way it looks is good, but not by a long shot There is no fine adjustment function that you can do while driving Because it is fixed by screw as you can see in the picture
If you want to change the angle on the spur of the moment, it's basically impossible to do so
It's a great way to fold up the Mirror when you want to slip through, or when you want to fold up the Mirror in a narrow bicycle parking lot That kind of Situation
Also, it's disastrous if the Screwle comes loose in any way
With OEM, you can adjust the angle of the screw by hand even if it hits a foreign object, but in this guy's case, the screw comes loose So bran bran bran
Stop and fix it again
That's the annoying part
Setting up the car before it starts running is an important product
[Durability]
There are cheap MotorcycleParts!
I'm still rooted in the fact that ALBA's Mirror used to be a fast Rust, but this Tanax I used the Mirror in the rain for a year and it did not rust at all
Maybe there was at least a spot of rust
I think the durability is reasonable in terms of being able to keep it in the same condition you bought it in
If you compare it to GunDam, it's Mirror like Jim
View detail
Normal!
There was no particular need to do so, but the body of the car that has been customised in a way is black Because I was curious about Plastic's Mirror and because I had accumulated some points, I bought it and I saw it
Plating's Mirror is many, but the price, design and reliability of There are few balanced ones, I think
Texture and appearance
It is called "Plating" but the body of Mirror is made of Stainless Steel It was not able to get rid of the dullness after a little polishing, so I applied buffing and bracket It became quite beautiful
(→ Photo 1)
The length seems to be about the same as the OEM, or a pleasantly short one This is before polishing
(→ Photo 2)
Mirror doesn't have any weird distortions
(→ photo 3)
Installation
It's no different than any other Mirror
Right Screw only (No Opposite Thread Screw is available)
After installation
Although the projected field of view becomes wide, it looks a little small There is no problem at all
(→ photo 4)
It doesn't pick up the vibration as much as the others Therefore, the field of view is also in Large strange Beauty
By the way, 106cc Spec. vehicle is MONKEY Resonance is only at Idling
Good points
It can be installed in M8 or M10 so that it can be used for a wide range of vehicles
The angle adjustment point is solid
The bad part
I want more angle adjustment range
There is no Opposite Thread Screw setting
general comment
It's calm design suits MONKEY as well as Large It's a good choice because it also works well with OthersNAKED and CLASSIC I think
So there is a reason for the longtime seller
I think I got a good deal
Recommendation
View detail
A long-established manufacturer
Due to the shape change of Bikini cowl
A change from the square Mirror of WeikeMODE
It's a simple looking Mirror that looks a lot like
In a single engine motorcycle, which is prone to high levels of vibration
Obviously, the blur has been reduced and is easier to see
It's a standard type with a reasonable price
You've got a lot of years of knowledge to draw on I'm impressed
The area of the mirror becomes Small if compared with the square Mirror
I think the performance is the same as the OEM round mirrors
View detail
This TRAD mirror has an excellent view of what comes from behind, My bike suffers from excessive vibration , this mirror minimizes this effect, I would prefer if the arm is slightly longer as my jacket's arm is visible on the mirror hence the 4 stars.
This TRAD mirror has an excellent view of what comes from behind, My bike suffers from excessive vibration , this mirror minimizes this effect, I would prefer if the arm is slightly longer as my jacket's arm is visible on the mirror hence the 4 stars. At a standstill like before moving out the image is fantastic, great for safety View detail
It is longer than OEM!
Purchased as ReplacementMirror for JAZZ.
It projects considerably to the outside than the OEM, but by turning the Mirror it brings it slightly inside, so it will be appropriate for that.
Viewability is overwhelmingly better than OEM, Manufacturer also supplies OEMMirror Manufacturer so you can trust.
View detail
Used for MONKEY
I know that OEMMirror is the most expensive and easy to see, but I wanted to get a sense of Custom, so I was looking for Mirror.
Initially C. F. Posh, KIJIMA, KITACO Z2Type Mirror was included as a candidate. Large I thought that the shape of the kiss could be matched to MONKEY, but actually when looking at mass merchandisers and reviews, there are many reviews that Bracket is short and the back is not photographed, and for Mirror it is a security part It is the same as nothing if the back is not reflected, because it is for protecting yourself Custom feeling is somewhat inferior, but this item was chosen. It is slightly shorter than OEMMirror and the Mirror diameter is a little small, so visibility is not a problem at all, but positioning is slow because Mirror's adjustment range is narrow. I think that it is better to match it carefully.
View detail
I think that it is conscientious to price and make.
I think Quality is more than price. Although there is no Turner mechanism etc. necessary for the inspection, but the field of view is also good and the car looks SMART more than anything so I am satisfied with Large. View detail
It also suits the SR.
SR is NORMAL except for Exhaust System. Headlight and Blinker are Round Type and Mirror feels something wrong like a square. Also, I also liked the Round Type Mirror because I was on an off-road car for a long time. For that reason I searched for Round Type Mirror that would become SR and this product HIT.
Impression was not so concerned about the vibration of Mirror.
When Idling it gets somewhat broke but does not tremble for running normally. The ease of viewing is normal. Trad mirror means that it became Trad and it became one of my favorite items.
View detail
Because dirt on the OEM mirrors became conspicuous, I exchanged them for this product.I installed cheap mirrors, which are the same shape as this product, on a scooter that I used to ride; they were useless because they easily got rusted and the posit
Because dirt on the OEM mirrors became conspicuous, I exchanged them for this product.
I installed cheap mirrors, which are the same shape as this product, on a scooter that I used to ride; they were useless because they easily got rusted and the position moved while riding.
This TANAX has had no problem.
Round-shaped plated mirrors goes well with Gholia, I think. It was a satisfied buy.
View detail
If CD125 is pure, it becomes a Mirror made of resin. That form did not think too other than a metaled round shape and this Mirror. Very pleasing by the field-of-view cinch and an appearance cinch, although attached also to the MONKEY for the same
If CD125 is pure, it becomes a Mirror made of resin.
That form did not think too other than a metaled round shape and this Mirror.
Very pleasing by the field-of-view cinch and an appearance cinch, although attached also to the MONKEY for the same reason.
View detail
It is used for Ape50 Type-D. It got disgusted deep-black [ the original manufacturer's product ], and purchased this article of the Chromeplating. -- although durability is not known yet since there are few runs -- appearance -- hard -- -- i
It is used for Ape50 Type-D.
It got disgusted deep-black [ the
original manufacturer's product ], and purchased this article of the Chromeplating.
-- although durability is not known yet since there are few runs -- appearance -- hard --
-- it became good.
View detail
Although form is satisfactory, I think that blur will be pressed down if a Stay is thicker.
Although form is satisfactory, I think that blur will be pressed down if a Stay is thicker. View detail
Since an original manufacturer's product rusts and it became lazy, it purchased. Although the cheap article of the Home center was examined, too, I hear that the major brand was good and it purchased here. Although attached and run, a field of view is g
Since an original manufacturer's product rusts and it became lazy, it purchased. Although the cheap article of the Home center was examined, too, I hear that the major brand was good and it purchased here. Although attached and run, a field of view is good, without vibrating. I think that I should have exchanged early. It is a Recommendation. View detail