Reviews
Mirror by Yamaha
This is something that is inevitably needed because Yamaha's Mirror uses Opposite Thread Screws. View detail
Yamaha's Opposite Thread Screw A must-have for cars
I purchased this product when I switched to Napoleon OnMirror because my OEMMirror was rusting.
The Mirror position is slightly higher, but it was successfully installed.
View detail
Fitting accessories
My motorcycle is a YAMAHA NMAX155 2021 model. I modified the TANAX AOS4 rearview mirror. If this heightening screw is not used, the AOS4 rearview mirror will touch the brake oil tank. This height-increasing screw is just right to increase the height by 2CM, and this screw has a variety of specifications suitable for the rearview mirror seat threads of various motorcycles. The left side of NMAX155 is the straight tooth, and the right side is the reverse tooth. -------------------------------------------------- -------- My motorcycle is Yamaha Nmax155 2021. I modified the TANAX AOS4 rearview mirror. If you do not need this to increase the screw, the AOS4 rearview mirror will touch the brake oil pot. This increased screw increase is just right, and this screw has multiple specifications that are suitable for various motorcycle rear -view mirror threads. NMAX155 is on the left is the positive teeth and the right side is against the teeth. Powered by Google Translator View detail
Opposite Thread Screw Adapter
I purchased the Opposite Thread Screw Adapter because it is essential for Yamaha cars.
However, the Mirror position is higher due to the Adapter, so it would be better to have a lower Adapter.
View detail
It is a must for Yamaha cars.
It is just a conversion Bolt but it scratches easily. monkey Wrench should not be used. It gets scratched easily. View detail
Scratches easily
Purchased for Mirror replacement.
I had heard that it was prone to scratches, so I worked with caution, but the scratches were firmly in place.
It's a cheap product, so maybe it can't be helped, but I'd like it to be made a little sturdier.
View detail
It is a reliable Napoleon On product.
This product is a trusted Napoleon product and you can rest assured that the Adapter will be high, so that's a Point that needs attention! View detail
Kills two birds with one stone by adjusting the height as well.
[How is it used?
Used to install Mirror from Other Brand Product, a must have for Yamaha vehicles. I have used it on various Yamaha cars.
Was the one you received as per Image?
The surface is cast iron with a semi-glossy painting, so it blends in with the surrounding parts.
Was the installation difficult?
Pimping. When installing Napoleon's Shark Mirror 1B, the Right Side had to be raised because the Accelerator Wire and Mirror Bracket interfere with each other, and the height of the Opposite Thread Screw Adapter was too high. The 20mm length was just right.
How was your experience with it?
The Mirror is now installed Refreshingly, and the eye movement distance is slightly reduced because the Mirror is slightly higher.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It doesn't now that it is installed, but it is susceptible to rust and will rust in less than a year if it is not well cared for after rain (in my experience so far).
Other items that would be helpful
Opinions and requests to Manufacturer:Material already in your products:There is a Stainless Steel Opposite Thread Screw Adapter, but please release a Black Dyed Stainless Steel Opposite Thread Screw Adapter even if it is a little expensive. It's my dream for many years.
View detail
No drawbacks other than easy to rust when exposed to rain.
This is required equipment when installing UniversalMirror on a Yamaha vehicle.
As you know, Yamaha uses Opposite Thread Screw for RightMirror, so it is not possible to use Quantity:Pair (for Left and Right) Normal Thread Screw cannot be used with commercially available Mirrors.
This is the Adapter to solve that problem.
The Left Side is not necessary, but Quantity:Pair (for Left and Right) In order to adjust the height of the Quantity, the Left Side is also included.:2pc. Set with Quantity:1 Set for 1 Vehicle is Quantity:Set
There are two types of paint:Black and Plating, but I choose Black every time because it does not reflect light and is not noticeable in my field of vision.
It's new, so it's still clean, but in the past, I've found it to be very rusty, which is a weakness of this adapter.
(No matter which Manufacturer's Adapter you choose, it will be very rusty)
The Adapter surface can be prevented from rusting by cleaning it frequently and spraying it with silicon spray, but the problem is the screw mountain part.
I don't know if this is due to the fact that the screw part of the mirror is iron and the mirror holder is aluminum, which causes electrical corrosion, or if it is due to the capillary action that allows rainwater to enter.
So, the recommendation is to lubricate the screw part first.
Just a drop of engine oil and screwing it in makes all the difference.
However, when the screw threads are lubricated, they become overtorque, and it is easy to destroy the receptacle screw on the Mirror Holder side when tightening, so be careful about that.
View detail
Expected
I bought and used it as a spacer because the mirror position of other companies is low. I am satisfied with the sense of unity that I cannot think of the other company's product. It is convenient if there is a little longer use. View detail
It can be used normally
I used it to put Mirror on the Other Brand Product.
It can be used normally.
Good thing it looks so OEM-chic and unassuming!
View detail
Installed on TOWN MATE 90
I bought it because it's a Yamaha Motorcycle and it's an Opposite Thread Screw
The OEM was broken, so I replaced it with the Mirror of Napoleon On as well, but it doesn't come on without it.
I bought the Plating one because Mirror is Plating, so I matched it!
The Mirror is a little higher, but I had no problem with it.
I also added Bracket Boots as well, so I guess it was just as well.
View detail
Is this what it looks like?
I'd like you to release the Black Anodized in Aluminum.
Also, Quantity:Pair (for Left and Right) I'd like to see the total weight published.
Previously. It's about making the bike lighter and losing weight yourself! And there was an article about...
View detail
A must-have for Yamaha
Most mirrors on the market are not Opposite Thread Screw.
But Yamaha has Opposite Thread Screw, why? Aside from the reason for this, I'd like to see a commonality in these areas.
Now, this Adapter is a necessity for the Yamaha cars. It may be a little bit high on the Mirror, but that's okay.
View detail
Nice Screw Adapter
This TANAX Left-Handed Screw Adapter is very useful. It allows me to lift up the mirror a little bit, and to allow me to install a mount between the mirror and the screw adapter. View detail
Some people need necessities
Unnecessary for people who do not have trouble with OEMMirror
For those who want to replace Mirror with purpose
We bought to attach the mirror folding Mirror to SEROW
Since I wanted to use Mirror as it is with Honda SL 230, my previous car contributed to Reduction in cost
Because Merit and Demerit are products that differ considerably among people, I want you to think well and purchase
View detail
Mirror high
At the time of handling, Left's Mirror hits the arm at all times and Mirror moves sometimes, so I bought it for fixing a little high. Yamaha exclusive use Quantity : Pair (for Left and Right) I bought it with. View detail
Because it is a Yamaha car
【What made you decide the purchase?】 Yamaha car to install Mirror with no reverse screw setting
【How was it actually used?】 Goods without mistakes
【Was it difficult to install? (Hard parts case)】 Easy
【Please tell me the point of installation and hang (in the case of Hard parts)】 nothing special
[Is there anything I was disappointed about?] nothing special
【Hope for Manufacturer - Please tell me if there are any improvement points】 I want you to set the reverse thread to Mirror rather than to this product
【Have you compared items?】 We decided to make Tanax safe though considering Manufacturer which releases reverse thread screw adapter
View detail
Required for Yamaha cars
I purchased Napole OnMirror at the same time. I tried installing Motorcycle's Mirror attachment part was not very good, but it was easy to install and it might be good as a product. It would be nice if Mirror itself had Opposite Thread Screw setting if possible. View detail
When a Stadium Mirror was attached to SR400, the span of adjustable range was narrow, copied only lower back, moved the own face, and was checking back, but height came out by putting in this product in between, and visibility became high very much.Althou
When a Stadium Mirror was attached to SR400, the span of adjustable range was narrow, copied only lower back, moved the own face, and was checking back, but height came out by putting in this product in between, and visibility became high very much.Although
purpose of use may be different, it purchased and it was good.
View detail