Reviews
Honda old for VehicleMirror installed on CUBC125 (JA58)
Installed a hand-held old Honda Mirror (8mm positive thread)
OEM 10mm Mirror with reverse thread 10mm Handlebar side with positive thread
So I looked for an Adapter with 8mm Mirror side positive thread and 10mm Handlebar side positive thread.
Equivalent to Tanax CM-2 Easy to install, just remove and replace OEM
I like it because it looks Classical.
View detail
For Mirror Replacement
I purchased this product to replace Mirror on my SR400.
It inevitably stands out because of its height…
View detail
Design is good
This is a quintessential Tanax.
It is an itchy product.
Quantity:I would be more than happy if they were sold in 1pc. units instead of 1 set of 2pcs.
View detail
Convenient
Mini bikes are mostly 8mm and Mirror itself is mostly 10mm, so this would be very helpful. View detail
Wrong!
I was going to use it for CRM80 but I mistakenly bought 10?→8?
I may use it someday, so I will put it to sleep in Garage.
I later purchased one that fits properly.
View detail
Fits perfectly with Plating mirror!
Required for UniversalMirror installation.
If there are many plating parts on a classic custom car such as a cafe racer, it is necessary to use a plating adapter or it will float.
The durability is fine and the finish is good for the price, so it's a commendation!
View detail
Mirror bolt
I purchased this bolt to change the diameter of the Mirror bolt. I recommend TANA-X's Bolt for Mirror bolt conversion because they have a wide variety of bolt types. View detail
It works fine.
Quantity:1 Set of 2pcs. is appreciated. The product photo shows a ding on one side of the screw, but this ding is unique to the Tanax Opposite Thread Screw, so this product, which is a Normal Thread Screw, does not have it. I am satisfied with the performance as expected. View detail
There's no problem, sir.
The Plating has a nice texture and the installation was completed comfortably.
It was a perfect match for Mirror.
Thank you for taking it for granted!
View detail
Good Material
Size reduction adapter for side mirrors from 8 mm thread to use with 10 mm mirror mounting holes, packaged in pairs. comes with washer The weight of the converter is good, the material is strong, the black color looks thick, the threads are sharp and look strong. Don't compare with cheap Chinese. Spirals tend to fall easily. Tanax Napoleon is a reasonably priced brand. I have checked several converters. Recommend this one for a good price. You won't be disappointed. Screw joint for 8 mm screws, for use with 10 mm. Packed in pairs. Available with secondary ring. The strength of the converter is strong, the material is strong, black, thick and strong. Do not compare to China's cheap. The thread is often falling easily. Tanax Napoleon is a brand that is reasonably priced. Check out many converters. Recommend that this price ok not disappointed. (Translated by google translation) View detail
Pay attention to mistakes buying! Let's see the plan of the product!
I misunderstood the information on the product name of Tanax and received it, mistake in purchase (Upside down Screw diameter) I did it..
In Tanachi "M8 -> M10" Is an adapter that converts M10 to M8.
ProductNo for those who want to make LITTLE CUBM 8 OEM Mirror M10 Mirror 【C-1 or CM-1】 Is correct. C-2, CM-2 are wrong.
I was convinced for the first time by looking at the image of the plan view at Webike to buy again.
Originally the product title of Tanax is confusing.
Although I commented as a bad point, the expression method of the product is too bad.
In this case buy mistake victims should come out. (I gained momentum for Large on other purchase sites)
The product is just installed, so corrosion resistance is the future verification.
View detail
8 mm to 10 mm
I will convert the diameter of Screw at the base of Mirror, but since it was attached to Mirror, I did not use it after all.
However, if it has this, it may be quite useful. I can use it in other places.
Making is good.
View detail
Purchased with Mirror exchange
When exchanging OEMMirror, conversion from 8 mm to 10 mm is required and purchase.
I am satisfied with the look that does not feel uncomfortable.
If you desire Quantity : 1pc. I want you to prepare the goods of.
View detail
Product itself is not bad
I attached it to the MONKEY's normal mirror but the height became high and Balance became worse 2 - I think that the product itself is not bad it was removed in 3 days View detail
Opposite Thread Screw correspondence
Purchase because I wanted to install DAYTONAMirror.
Although it is a plain part, it is a product that seems to be good to make well.
When purchasing it is Opposite Thread Screw correspondence or it is necessary check!
View detail
I made it same Manufacturer as Mirror
Cheap Stainless, Silver colored things are rolling around the house ...
Anyway, I tried to make it the same Manufacturer
Since I attached Stay boots after this, I can not see it ... w
If both Mirror and Adapter are those of Napoleon company, it is good to have a sense of unity!
Until now I have attached Adapter or whatever I'm rolling appropriately as it is good for now, but as expected I thought that Silver color Adapter in BlackMirror ...
Scooter is often hidden by Stay boots, but it is a place that you can see as a normal Mission car
Recommendation!
View detail
Without this it is impossible for Yamaha cars.
The Mirror diameter of CYGNUS is 8 mm.
Since 8 mm Mirror is few in the Other Company Product, it will be looking for 10 mm Type.
Therefore, this Opposite Thread Screw Adapter which is peculiar to Yamaha is necessary, and this adapter of 8 mm → 10 mm Opposite Thread Screw is necessary.
When ordering, look carefully on HP's Manufacturer 's HP
Large thing is to check well that there are no mistakes.
Let's be careful because it seems that there are too many types and there are no translations.
Left Side Spacer of just height is bundled but Quantity : Pair (for Left and Right) I think that it is a conscientious Manufacturer's consideration because it is essential to change Mirror.
View detail
I used a 10mm->8mm adapter for a Cub. The quality, especially the coating is great. It hasn't rusted although it's been left 5 years out in the rain. However, the inner side will rust. I couldn't remove adaptor from the mirror because of the r
I used a 10mm->8mm adapter for a Cub.
The quality, especially the coating is great. It hasn't rusted although it's been left 5 years out in the rain.
However, the inner side will rust. I couldn't remove adaptor from the mirror because of the rust.
I used a large wrench to remove it but it required quite a bit effort.
Now I now why some second hand mirrors are sold together with adaptors.
You can see how much rust I'm talking about from the picture.
I scraped off some of it but it still looks awful.
The reason why it gets so rusted is because the screw hole faces upward and has a dead end.
Water will enter screws even though they don't seem to have any space.
I advise you to coat them with highly rustproof anti-seize and urea grease before you insert them.
I'm satisfied with everything else except the fairy high price.
I don't need two. I wish they were sold individually.
View detail
It equips quickly. -- a Mirror merely low type -- a part for a conversion Adapters -- becoming high -- -- it is worrisome although it is unavoidable.
It equips quickly.
-- a Mirror merely low type -- a part for a conversion Adapters -- becoming high --
-- it is worrisome although it is unavoidable.
View detail
At the time of wearing of the polygon mirror of a Takegawa to SUZUKI-SMX50, since a pure Mirror-screw part differed [ 8 / M] in the Size of a polygon mirror from M10, it purchased. Since the color was also almost the same, there is also a feeling of
At the time of wearing of the polygon mirror of a Takegawa to SUZUKI-SMX50, since a pure Mirror-screw part differed [ 8 / M] in the Size of a polygon mirror from M10, it purchased.
Since the
color was also almost the same, there is also a feeling of unification.
Motorcycle Parts article store may be sufficient, and I think that it is also good to have placed.
View detail