Reviews
To install a 320mm disc on a '21 ZX-6R!
From the first play with the Brakes in 2023 to the Master Cylinder, Brake line, Caliper, and Clutch replacement, it was finished. The only thing left was the disc, and I had a long-sought brembo at the summer We-BigSale.:I purchased a Floating Disc. 310mm OEMDisk size would have been fine with the 9mm PLOTOffset collar I have been using, but I purchased a 320mm…OEMSizeOver, so the Offset collar was also changed.
To select an offset collar, I borrowed an 11mm offset collar from a friend and measured it. However, when I selected 14mm, the measurement result showed that the pad contact surface slightly protruded from the disc. Therefore, we decided that 13mm Offset collar by KOKEN would be the best choice! I decided to go with the 13mm Offset collar by KOKEN. The color of the collar is black, and while PLOT's Offset collar is matte black, Koken's is glossy black. The OEM dwell pin fits perfectly, as expected of made in Japan quality. The only complaint I have is the cushioning material. It is a thin and thin Nylon cushioning material and I don't notice it even if it falls on the floor or table. The only complaint I have is that the thin, dusty Nylon cushioning material is too thin to notice if it falls on the floor or table. (Chuckles)
View detail
Is this what you got? Too bad.
The color is totally different from the sample. I was aware of the slight error since it is a picture, but the color is totally different.
The package is listed as titaniumium gold, but the actual color is somewhere between gold and orange.
In addition, one of them is obviously a different color, so much so that I think it's the wrong Material. 。 I wonder if the electrolysis process took too long during anodizing. This product is not suitable for shops that charge for labor.
Since the work is not progressing, we will use it temporarily this time for now.
View detail
Just right for an adjustment.
Bought this because I needed it for a Caliper replacement.
It's not a strength problem, so you can use it.
It's hard to get a better impression than that with a product like this.
View detail
It is the best texture.
In attaching brembo to H2SXSE, it is absolutely necessary.
I had trouble wondering whether it was 8 mm or 10 mm, but made it the same as 10 mm for Z 900 RS.
Installation is easy!
Because it is uneven, it will be worn out OEM Color.
Mounting Bolt was easy to replace as it was OK with OEM diversion.
View detail
Quality is not mistaken
I do not mistake the quality, but the price is high.
However, the installation will be Fit with Exactly by making solid details.
It looks pretty nice as it looks at the color of Anodized.
View detail
I should not miss it - - -
Purchased along with introduction of brembo's CNCRADIAL CALIPER to GSX-R 750 L 0.
The color is two colors, Black and Hard anodized aluminum, but since Caliper's Color was HardAnodized finish, I chose Hard anodized aluminum for near color.
I have chosen - - - Honestly is not it too high?
It's a must-have parts - - -
Cospa is too bad - - -
Afterwards it was a brand new but there was a small scratch. Well I guess this is about Japanese people (Lol)
For the time being, in order to make scratches invisible, I installed the scratched side against Brake rotor.
View detail
Along with the 320 mm formation
Purchased along with making the disc of GSX 1300 R HAYABUSA 320 mm
Was.
At first, interference between disc and Caliper by overlapping appropriate Washers
I confirmed the contact surface of the pad to the disc, decided the height and purchased it.
In my case it was 5 mm thick and Large was durable.
I think that the goods themselves are made very accurately.
However, I think that the price is a little expensive.
Since there are also kinds of Aluminum, there is knowledge of materials, can be processed by oneself,
Or if there is a place to underwrite the Gold genus processing nearby,
With a price of two thirds
I think that it is possible to produce it.
* Anodized of surface treatment is also necessary.
When there is circumstances like me and there is not time to install,
When there is no place to process nearby etc.. The
It is recommended.
View detail
use a brembo -- use what -- they are necessaries for carrying out Caliper exchange -- keep in mind that it mistook once [ ? ] and has placed an order.Everything but a Size has a kind of unevenness of an attachment part.
use a brembo -- use what -- they are necessaries for carrying out Caliper exchange -- keep in mind that it mistook once [ ? ] and has placed an order.Everything but a Size has a kind of unevenness of an attachment part. View detail