Reviews
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Exactly in subtle Size
The normal Φ8 hose clip is too thin and tight, while the Φ10 hose clip is too stiff.
This is a dedicated Hose, so the Size is Exactly.
That alone is already worth it.
Cloth-wrapped Spec. but the cloth feeling is weak.
It will have a fairly smooth surface finish.
So, it is not suitable for older cars that want to have a full cloth feel.
Performance is unquestionable!
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
very durable, strong, no leaking
I've installed 3 Kohken mesh type oil tank hose on my motorcycles for 3 years and now on Hayabusa. It's high quality, very durable, strong and no leaking. It has 2 clip available which is a advantage for being ready to install. View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Durable hose
Excellent quality of brake fluid hose, it is easy to install and have been using it for 5 years plus, and still no leaking. Recommended View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Brembo master cylinder
Buy Hose cut too short (laughs)
Compared to the texture of the Brembo master, I would like a more luxurious feel.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Fluid Sweat
After six months, Fluid sweats and ruins it.
Quantity:I bought 2pc and both of them are ….
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Good Quality & Packaging
The quality of the item is good. The hose is very durable and the clamp is fit to the hose. The item was apcked nicely without any dent. View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Changed to brembo
I tried to connect this Hose along with bremboBrake and Tank replacement, but it seems a little stiff. It seems to be a little hard, and the tightening seems to be weak even with the attached Band.
It seems to come loose under load.
In the end, it is exchanged to a normal Hose.
It looks good, but if you take it on and off a few times, the mesh on the surface will start to peel off. It will be like
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Handle with care.
This Hose is covered with Mesh and I like its high quality appearance, and I always use it when I install Master Cylinder of Tank Separated Type.
When I installed it this time, the Hose insert was too tight and the Mesh covering was spread out, causing it to come off and become tattered.
You should not work on it by force because it is only covered with Rubber hose.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
It looks good.
Depending on the position of the Tank, I think you can use both two (Brake and Clutch) in 10 cm.
It is not recommended for those who are in a position where the bend of the hose is too tight.
I have a brembo RCS, H2 mouth cut tank and POSH brackets and it feels pretty tight.
If you want to install the tank horizontally and neatly, the normal Hose will be more ideal for you.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Mesh hose of Koken Original
This one looks better and seems to be more durable than the brembo OEM Hose. View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Koken OriginalOil Tank Hose
It has a higher quality feel than the brembo OEM Hose. It also seems to be more durable. View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Custom parts are all about looks!
A slightly sturdy, mesh-embedded hose
As others have written, the Hose is thicker and takes a little more care when bending it.
But since appearance is everything, I think this thickness is a large thing.
I'm sure it's thin and Mesh is possible, but that thickness seems to give it an Other Brand Product feel
Anyway, the Cool is more transparent than the regular Hose, and the Hose is more attractive than the regular Hose.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Mesh is good.
The normal rubber hose will cause water droplets to come out around the hose.
With Mesh hose, you don't have to worry about that.
I also always use mesh hose because it is safe from external shocks.
The length is 10 cm, so if you want to use it longer than that, you can't use it.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
It looks good
Used for GALE SPEED's Tank and Radial master
It wasn't too hard or too soft, just right.
Mesh hose looks great.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
It looks good.
Because of the thickness of the Rubber tube, it is harder to bend than the normal hose.
It's even more so with a short connection. It's a very tight fit, so if you connect it to the Tank, the Mesh part will recede. I don't mind it so much because it's hidden by the clip, but I think it would be better if the rubber tube is a little thinner and softer.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
KOHKEN Mesh Oil Tank Hose
KOHKEN Mesh Oil Tank Hose with 2pc clip is very nice, strong, and easy setup with AEM titanium tank oil anh Brembo 19RCS Cors#29;a corta on my Triumph Speed twin 1200 View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
It's pretty solid..
Hose is thick and reinforced with Mesh, and it is better than Rubber hose.
I am a bit curious, so I take a moment to bend it. I do not want to apply the bending force on the Nipple part. Since the price is not high at all, I think it would be better to buy it a little longer and cut it.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Too good firm or too bad
We replaced it together with bremboRCSMASTER.
Although the texture is good, after six months of assembling like an image Brake fluid has blurred from MASTERNipple.
Although it is good Hose, weak part when used with ShortElbow shape too much "MASTERNipple this time" It takes a burden on the part and it is not good.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Texture is better than ordinary Rubber hose
Brembo radial master
When you exchange Master Tank Bracket
Length did not match and I used this product.
It is Pank's Tank Bracket
10 centimeters is enough.
I cut it and installed it because it was long..
Cutting was cut vertically with a new Cutter blade.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Very different!
In changing FieldTank, because it does not reach current, search Oil Tank Hose.
Master Cylinder is brembo so buy it by believing the item description.
Material is also firm and reinforced with Mesh.
Unlike just RubberTube, it is hard to bend because it is hard, but I feel that collapse is small even if bent.
There is no regret feeling even if you connect to rizoma's FieldTank.
View detail