Reviews
Racer 900 wash for Vehicle
I have a φ10-φ34 and bought it because it was too small for my Racer 900.
You can block it with Tape, but it is not expensive and is useful because it is not expensive and only needs to be inset.
View detail
It's neither good nor bad
I purchased this for use on my YZ125X.
It was installed without incident and I have no complaints.
View detail
Convenient for car wash.
To some extent, it can be used for any shape of Exhaust System. It is well made and safe. View detail
It was a perfect fit for the YOSHIMURAExhaust System.
I was worried about whether the Large size would fit before purchasing, but it was a perfect fit. I am satisfied. View detail
Would recommend, variable size is excellent.
Works just as advertised. Keeps water out of your pipe.Excellent plug to keep water out of the exhaust system. Many different sizes, can use it on both my 2-stroke and 4-stroke. Would recommend! The bright flag allows for me not to forget to remove it before my next ride! View detail
Easy to use
I bought it because I changed the Exhaust System to MORIWAKI and it was easy and affordable. View detail
Necessities for car wash
It is used for CRF250RX.
When using a high-pressure washer to wash rear fenders, rear tires, and the exhaust system itself, you can spray it without hesitation if you have this. It is easy to use because you don't have to use curing tape. It is not easy to remove. It is a must-have for car wash.
It cannot be used for motorcycles with small hole diameters such as SEROW.
View detail
Z900RS MORIWAKIShort Tube
The car wash was completed with no water and no worries - I'm glad I bought it. View detail
For car wash
Purchased to accompany car wash.
Items to be inserted into the Exhaust System outlet and used to wash the car.
It is neither possible nor impossible to use it in a normal way.
View detail
Cosy! Very convenient for car wash
[How I bought it]
I used to wash my car without plugging the Exhaust System because it was kind of a hassle when I washed my car lol.
But every time I finish washing the car, wipe it clean, and go home! When I turned on the engine, water that had accumulated in the exhaust system came out with the exhaust gas.
Impressions of use
I used it for the first time when I washed my car the other day and I put it on right after running it for the first time and it didn't melt, so I'm really happy about that lol. (I didn't think anything of it, I just put it on right away lol)
The size of the OEM exhaust system is large enough to fit almost any type of car.
If you are replacing the Exhaust System, you may not have enough Size for some things!
As long as it's plugged in tight, water will never get in, so you won't get your body wet with water from the Exhaust System like I did after washing my car! LOL.
It's definitely worth buying, as it did exactly what I expected it to do for about one Coin!
【Review】
Cheap and cosy!
It properly prevents water intrusion.
Complaints are not in the gain…
View detail
Easy to use
I use it when I wash my car, etc.
I've been using it for a long time and it's easy to use because Rubber doesn't harden either.
Before I bought it, I was worried that the weight would pull it off.
This is not the case, and the lid is securely in place.
View detail
A must-have at the car wash!
Prevents water from entering the Exhaust System when washing the car.
A bit of an Ideas product!
View detail
Used on KTM85
I bought this for my KTM85. It fits well and doesn't fall off if there is a little bump. View detail
Prevention of water intrusion into the exhaust system when washing the car
I bought this to prevent water from entering the exhaust system when I wash my car.
zx25r AXIS Lapo Japanese Government Approved Exhaust System.
Because the exhaust port was oval, it was anxious whether this product of the round form was Exactly hammed, but because the Plug part was Rubber, it pushed it in while turning, and inserted it, and actually washed the car, but water penetration could not be confirmed. It is effective.
I don't know what will happen if Level is sprayed directly with a high pressure washer, but I don't think I'll do that, so I don't think it's a practical problem.
The handle seems to be weak as a point of concern. At the time of actual pulling out, I pulled out holding the thick side of the Plug which protrudes from Exhaust System. when there is no protruding part with Large threshold Exhaust System, it becomes pulling out and inserting holding the handle, I think that it is a little uneasy.
View detail
Easy to use.
I was concerned about water getting into the Exhaust System during the Motorcycle wash.
This one just needs to be plugged in and will prevent water from entering.
The size range is wide, so it can be shared among several motorcycles.
It has a handle so it is easy to remove.
View detail
It will be a favorite
I always use it when I wash the car after driving off-road, etc. Exhaust System It keeps water out of the inside of the unit and prevents insects from getting into the unit when it's in storage It's easy to use and has no problem feeling Fit when installed Best of all, I think it's cheap View detail
I was able to high-pressure wash my off-road motorcycle!
Purchased it for an Off-road motorcycle wash for vehicle The high pressure washer was able to clean the exhaust system area without worrying about it! If you have an off-road motorcycle, we recommend you to have one! View detail
The pressure washer was able to give the car a good wash!
Purchased it for an Off-road motorcycle wash for vehicle The high pressure washer was able to clean the exhaust system area without worrying about it! If you have an off-road motorcycle, we recommend you to have one! View detail
Exactly fitting.
Although I'm loading Motorcycle into the car immediately after driving,
It smells unexpectedly hot and exhaust.
I have not loaded it right after, but I actually use it
From the side, after using Exhaust Plug
I heard that exhaust smell in the car has decreased.
I tried putting water on the ground,
There was no invasion of water near the Exhaust System exit.
I think that the tightness is high.
I thought that it was not necessary to have a red handle,
When you put it in a pit, you need a quota and power when you remove it.
It is a convincing shape.
One regret was that the handle was made by Gold Genus
I think that Rubber is molded around it,
Grab a handle with a Rubber Quantity : Pair (for Left and Right) When you twist it
It moves slightly.
I think that there is no way to get it right away,
Because it is troublesome for Rubber to leave when pulling
This is the evaluation.
However, because it has a red handle,
If I forget to remove it would be painful,
Because it will obstruct Exactly
I am saved..
View detail
Product that seems to be insufficiently built up
I bought it to prevent water from entering the muffler during car wash, but with the use of about two times, the part of the handle got out.
I forced it in and pulled it out - - -
If there is no measure such as gluing after applying knurling etc. to the handle shaft - - -
View detail