Reviews
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
OK in its own way
I think it is suitable for old cars. if the length of lever is longer by 10mm, I feel it is easier to use. View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA Steed VLS Springer NV400CSW, HONDA CB750F, HONDA Bross 400, HONDA Zervis., HONDA Steed 600, HONDA Steed 400 VSE, HONDA Steed 400, HONDA jade, HONDA VRX400 Roadster, HONDA NS-1, HONDA CB125T, HONDA AX-1, HONDA CB600F, HONDA CB600F, HONDA VT250 Spada, HONDA Shadow Phantom 750, HONDA Shadow Slasher 750
Used for VTR250
OEM-like, yet inexpensive
The VTR250-03 I bought used had a Short Type variable lever, but it was difficult to use, so I switched to this one.
I think they are very similar to OEM parts. The cost is very reasonable, so even if you break it, you don't have to worry about it.
Don't forget Grease/Oil when replacing.
View detail
Fits: HONDA CB250R, HONDA CBR250R, HONDA CB250F, HONDA CB250R, HONDA CB250F, HONDA CB125R, HONDA REBEL500, HONDA REBEL250, HONDA REBEL250, HONDA GROM, HONDA GROM, HONDA CBR400R/CBR400R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CB400X/CB400X, HONDA CB400SF, HONDA CB400F/CB400F, HONDA CB300R, HONDA CB500F
I wanted the shape of the image.
I was not satisfied with the lever shape of the grom JC61, so I bought it with a ray of hope in the picture, but it was still the same shape as the OEM.
I have no problem with it, since it's valuable enough as a spare, but I'd like a Short, preferably in the shape shown in the image.
Brake Side has a good shape of short lever in 202-079SR, though.
View detail
Fits: HONDA Benly CD90, HONDA Benly CD90, HONDA diocesan, HONDA Spacey 80, HONDA Journo Clare, HONDA jazz, HONDA gyro X, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA livudio, HONDA Livudio SR, HONDA Livdio ZX
Old Scooter Parts
Used for Eve Smile. I was dissatisfied with the grip and after changing it, it is easier to ride Stress. View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA Steed VLS Springer NV400CSW, HONDA CB750F, HONDA Bross 400, HONDA Zervis., HONDA Steed 600, HONDA Steed 400 VSE, HONDA Steed 400, HONDA jade, HONDA VRX400 Roadster, HONDA NS-1, HONDA CB125T, HONDA AX-1, HONDA CB600F, HONDA CB600F, HONDA VT250 Spada, HONDA Shadow Phantom 750, HONDA Shadow Slasher 750
It exchanged together at the time of brake lever exchange. I was easy to grasp lever form and thought that texture was also good considering a price. A point regrettable [ one ] has GATA in a pivot part compared with a pure lever. Operation do
It exchanged together at the time of brake lever exchange.
I was easy to grasp lever form and thought that texture was also good considering a price.
A point regrettable [ one ] has GATA in a pivot part compared with a pure lever.
Operation does not seem to be affected.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
Clutch is now lighter.
When I installed it, the grip of the clutch became surprisingly light because I cleaned and applied grease. It looks great with WhiteTank and Contrast in Black. The installation took a little more time than the brake lever. The photo is not Clutch but Brake lever. (NC31) It is View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA VFR1200F, HONDA CBR1000RR, HONDA CB1300 Super Touring, HONDA CB1300 Superbordor, HONDA CB1300 Superfor, HONDA CB1300 Superbordor, HONDA CB1300 Superfor, HONDA CB1100, HONDA CB1100, HONDA CB1300 SAA (ABS) 10-12, HONDA CB1300 SA (ABS) 10-12, HONDA CB1300 SAA (ABS) 10-12, HONDA CB1300 SA (ABS) 10-12
In a standing duck.
When I went strawberry picking, I got stuck standing up on the CB1100RS and my LeftLever broke off.
Limit FingerQuantity as it has been broken for quite a long time:Because there was only 2pc left, it was the toughest Clutch operation ever.
I wanted to replace it immediately, so I ordered it from We-Big, which had it in stock.
It arrived quickly and the inconvenience was only momentary.
The product was almost identical to the OEM with no problems.
I will try to avoid the same thing.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
That's a lot easier
I replaced the Clutch lever and Brake lever at the same time
Because the OEM Product Lever was only a little far away, Lever operation Grip I had to regrip the Lever with my fingers, or I had to regrip the Lever with my fingers, so I thought it was a good idea to improve and replace it You were right You were right It's much easier And the part where the clutch switch hits (Because it's sharp?) Because there was an imprecation that it would break, the part was beaten a little and made round There is no problem at present, because Engine is applied to each GEAR other than Neutral I'm relieved
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
Cost Poor performance
I used this for CB 750 RC 42, Lever liked Black. It used to be a Korea made BlackLever, but I like it because it is glossy here. It is Exactly to RC 42 and there is no astringentness The operation feeling is very good View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
It is easy to use
Even when it is exchanged from OEM, there is almost no sense of incongruity in use and design.
Moreover, since the fingertip grips firmly, it does not slip and fingers slip off almost.
Because the Lever holder is Black, I got a feeling of cohesiveness and made it Black and it was the correct answer.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA Zervis., HONDA Steed 600, HONDA Steed 400 VSE, HONDA Steed 400, HONDA jade, HONDA VRX400 Roadster, HONDA NS-1, HONDA CB125T, HONDA AX-1, HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA Shadow Slasher 400, HONDA Shadow 400, HONDA Shadow Classic 400, HONDA Shadow 400, HONDA Shadow 750
Good
I bought this lever set for CB400SS, which is a vintage style motorbike and this product is very suitable and fit the style. Exspecially the chrome coating, a huge difference compare with original Honda Lever and even shinny than any other "Silver" lever. Good pricing, Good product! View detail
Fits: HONDA NSR80, HONDA NSR50, HONDA NS50F, HONDA MBX80 Integra, HONDA MBX50
To NSR 50
NSR50 installed in the previous term. I bought this Lever because it is cheap.
There is no point of dissatisfaction at the moment. Easy to install.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
operation
I exchanged because Clutch was hard. As a result, it is somewhat lighter, but Handlebar and Lever are just good. A little Custom feeling came out. It is a pity that the tip is round, but looking will change if you cut it flat. View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
According to Brake
Because Brake was made with KIJIMA's Adjuster, along with that, Clutch was also exchanged.
Since the installation was with Bikini cowl, it was work of loosening the Wire of Engine side, but it is easy even for an amateur even if you know how to do it.
Let's make Grease up neat.
The shape changes slightly from OEM, I like it.
The price is also cheap and satisfying.
OEM to Spare when falling.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA Steed VLS Springer NV400CSW, HONDA CB750F, HONDA Bross 400, HONDA Zervis., HONDA Steed 600, HONDA Steed 400 VSE, HONDA Steed 400, HONDA jade, HONDA VRX400 Roadster, HONDA NS-1, HONDA CB125T, HONDA AX-1, HONDA CB600F, HONDA CB600F, HONDA VT250 Spada, HONDA Shadow Phantom 750, HONDA Shadow Slasher 750
Cheap Lever
I bought it for Stock of for Repair.
It is cheaper than OEM, Lever also got closer to hand than OEM so I expected to improve operability.
As you can see in the image of Manufacturer, it is a little far from the center because Lever's point is far from the center, so people who hold the end of Lever may be a bit handy.
Still it is better than OEM because it is in front.
Regarding the adjustment function I do not want Gold as much as Lever, but it is a recommendation for those who changed the position to hold.
View detail
Fits: HONDA CB250R, HONDA CBR250R, HONDA CB250F, HONDA CB250R, HONDA CB250F, HONDA CB125R, HONDA REBEL500, HONDA REBEL250, HONDA REBEL250, HONDA GROM, HONDA GROM, HONDA CBR400R/CBR400R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CB400X/CB400X, HONDA CB400SF, HONDA CB400F/CB400F, HONDA CB300R, HONDA CB500F
Instead of OEM
Buy OEM because it bent overturned.
Installation and precision can be installed without any problem with OEM.
I hope to have Short lever and Black.
You can rest assured if you have one as a spare.
View detail
Fits: HONDA Benly CD90, HONDA Benly CD90, HONDA diocesan, HONDA Spacey 80, HONDA Journo Clare, HONDA jazz, HONDA gyro X, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA livudio, HONDA Livudio SR, HONDA Livdio ZX
Black Lever
OEM's Lever was Silver, I bought it because I wanted to make it Black. As for installation, it is almost same shape as OEM so there is no problem. Painting is not beautiful, but it is a satisfactory Level personally. View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
Cospa strongest
Price is the strongest
The shape becomes close to the hand, so it becomes easier to put in force and it is GOOD
Painting is beautiful for the price and price is fine
There are subtle bubbles when looking at near, but it is not about noticing it when you are bothering about driving about 30 cm even if you drive
However
When it is VT 400 S, the part that came before this comes down..
It is also slightly shorter than OEM
Wobble is slightly more than OEM, but it seems to be within the allowable range and within error range
Overall it is a good product
View detail
Fits: HONDA NSR80, HONDA NSR50, HONDA NS50F, HONDA MBX80 Integra, HONDA MBX50
Since it fell while running the gravel road, and the Clutch lever had broken from the root, it purchased.This product was purchased also when it had broken before .Immediately after attachment, a motion is very astringent, and unless it makes it g
Since it fell while running the gravel road, and the Clutch lever had broken from the root, it purchased.This product was purchased also when it had broken before
.Immediately after
attachment, a motion is very astringent, and unless it makes it get used to operate repeatedly, it does not become a smooth motion.Since it was a Lever uniquely attached by the model on which
it has ridden, it had been rescued very much.
I need your help well in the future.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA Steed VLS Springer NV400CSW, HONDA CB750F, HONDA Bross 400, HONDA Zervis., HONDA Steed 600, HONDA Steed 400 VSE, HONDA Steed 400, HONDA jade, HONDA VRX400 Roadster, HONDA NS-1, HONDA CB125T, HONDA AX-1, HONDA CB600F, HONDA CB600F, HONDA VT250 Spada, HONDA Shadow Phantom 750, HONDA Shadow Slasher 750
It attached to VTR250 currently used for Gymkhanas. It fell during practice, it broke with a snap from the middle of a Brake lever, and since it had been forced to have purchased, the Clutch lever was also purchased in passing. It is shameful,
It attached to VTR250 currently used for Gymkhanas.
It fell during
practice, it broke with a snap from the middle of a Brake lever, and since it had been forced to have purchased, the Clutch lever was also purchased in passing.
It is shameful, if it does not have a Spare lever although such play is carried out.
Although he thought that he would buy the cheap thing of the Manufacturer of the same name as the movie of the
ancient times, since he wanted to receive early, this product was chosen by the thing with a stockout.
(A price is ... although it is twice)
Lever form is a NORMAL and a little different, its bend of a root portion is strong, tends to apply an index finger, and has become.
It will be the form which is easy to grasp in the one where a hand is smaller.
(Refer to photograph)
Since especially the hand is not necessarily small, I think that a benefit is not necessarily received so much, but differing from a NORMAL has [ a little ] sense of superiority.
Since it has not ridden perfectly yet after attaching, it has not verified about Lever form.
Although the
Clutch lever had not broken, since it purchased with much trouble, it exchanged.
Some original Levers were put in the tool box at business, when it was.
Since it fell over with under [ sufficient ]
practice, the cut was made in the root of the ball at a tip by the Grinder so that it might not break from middle like a Brake lever.
Only a ball will break [ strange now / failing to get off the ground ], even if it carries out a way.
The Lever which had broken replaces the new article of a Polished, and if the circumference of the always seen Handle becomes beautiful, the whole Motorcycle becomes tight and appears.
View detail