Reviews
Good thickness to withstand STREET use!
I bought a battered 900SS (900SL) and am Restore.
Although battered, the visible exterior is relatively clean, with no cracks, cracks, or discoloration on the screen.
The body is 30 years old and has some minor Abrasion that may have been acquired during the process of use, but no problems that would require replacement.
I was going to use it as is, but ...
When I applied it to the car body under restoration, I found that it was distorted quite drastically.
I thought that the Screen of the Initial Model without Oil Temperature Meter was installed on the body of the Second Type Model with Oil Temperature Meter on the Meter, so the Oil Temperature Meter might have pushed the Screen and deformed it (in fact, the Oil Temperature Meter part was scraped off in contact with the Screen). I thought that the Oil Temperature Meter part might have been deformed by the Oil Temperature Meter (the Oil Temperature Meter part was actually scraped by contact with the Screen), or that the Mirror Bracket was bent and the Cowl was deformed when the vehicle tipped over, and the Screen was distorted by the bent Mirror Bracket. However, it seems that the Screen was distorted by the weight of some luggage that was placed on the Screen during long-term storage.
So, I replaced only Screen to try it out.
Fortunately, the reading was per Large and the distortion disappeared with Screen replacement.
In replacing the oil temperature meter, we should have purchased one for the Second Type Model, which has an Oil Temperature Meter, but this time, we dared to purchase one for the Initial Model, which does not have an Oil Temperature Meter.
The reason is that the Initial Model does not have a raised Screen and has a more beautiful connection with the front curve of the Cowl.
The design of any car model must be an Initial Model that the Designer thought was the coolest!
I think that the beauty of the model when viewed from the side is spoiled by the Second Type ModelDesign with a raised Screen because the Oil Temperature Meter is retrofitted to sell the product and the Screen makes contact with the product as it is.
However, the Oil Temperature Meter in question is violently contacted as it is.
I'm shaving the Meter side of the contact area, but I guess people usually don't like to shave ...
The Second Type Model's raised Shield is also more windproof (the Screen for the Initial Model is much lower), so it is also suitable for normal use.
Since the mounting dimensions are interchangeable, it is recommended to use the Second Type Model with or without the Oil Temperature Meter for touring applications.
However, it is only the Initial Model that is completed in terms of design!
ScreenMaterial performance is unquestionable!
I would have preferred a thinner, more transparent and distortion-free ScreenCraft product, but unfortunately Webike does not carry it.
I gave up on the ScreenCraft product, which is characterized by BALI nko cracking in one shot when it falls over, and went with the more sturdy ACRYPOINT product, but there are no problems at all with transparency or distortion.
It is obviously thick and sturdy, so I don't feel that it will always crack if it falls over like ScreenCraft.
The hole positions did not match, but this must be a problem on the DUCATI side.
Even if it does not fit, it is only about half of the Screw diameter, so a little shaving with a round file will do the trick.
In particular, the 900SS is a spec. that is fixed with a well nut, so it does not matter if the gap is a little low or high.
View detail
It looks good
The OEM Product has almost no wind protection effect, so it was tight when touring, but thanks to the 6cm higher height, the wind exposure seemed to be reduced. However, the clasp is a little too small and does not stop properly. View detail
Perfect hole position
[How is it used?
We used this Screen in combination with MC21's Saiya Cowl.
We were worried about OEM used products and TIGERPerformance's Screen, but we chose this product because of its shape and transparency.
Was the one you received as per Image?
It arrives with a protective film attached to prevent small scratches until installation is complete.
It is also quite transparent.
Was the installation difficult?
Installation is easy
The hole positions were perfectly aligned with those of the Saiya Cowl, so there was no need to modify them.
I also used a Nylon rivet from KITACOConvenienceParts because it had an M4 hole and I did not have an OEMRivet. (https://www.webike.net/sd/1343087/)
How was your experience with it?
The shape is a matter of personal preference, but I personally think it is a good length.
The transparency of the ScreenBody makes it look good.
[Included Parts:were they on?
This is the only product, so an M4 Rivet is required if needed.
[Was there anything that disappointed you?
Not at all!
【Review】
I was concerned about the accuracy of the mounting holes since it is an external Screen, but there were no problems at all.
The transparency is quite satisfactory.
View detail
exchange of new products
I thought about renewing the screen, and considered the inexpensive Thailand moth screen, but I was concerned about its accuracy, so after much deliberation, I decided to go with ACRYPOINT's ClearScreen. I was worried about the accuracy, so I decided to go with ACRYPOINT's ClearScreen. I was relieved to find that the product was almost OEM and solid. I am looking forward to installing it! View detail
I'm not sure.
I was not sure about ZeroGRA, but I chose this one because the delivery time was 3 months.
The texture is good and I am satisfied.
View detail
Maybe not, but it's a possibility.
It's only a possibility.
Headlight will melt
I can't think of any other possibilities, so it's just a possibility.
I contacted Manufacturer.
Thank you for your purchase.
Thank you for your inquiry.
We believe it is highly unlikely that our LightShield will melt or go bad.
And no such incidents have occurred to date.
It may be different because I received a reply that
Headlight is about 15,000 yen for 2 parts.
Also, it can be installed without modification.
Widening the holes in the mounting section allows for installation similar to OEM.
The braid on the edge is always stretched at both ends and doesn't stick properly, so I think the only way to attach it is with double-sided tape.
View detail
The security of JAPAN!
This is Screen from JAPAN!
Very solid product with very little distortion!
It is easy to replace with PortoOn and is perfect for a little dress-up.
View detail
ACRYPOINT Street Type Screen
My car: Kawasaki z900rs cafe. Modified product material: abs plastic. Modification effect: it looks good, the texture is very changeable with and without sunlight. Purpose: Reduce wind resistance on the chest and improve driving experience! Purchase experience: delivery time is very fast, the goods arrive soon, very satisfied! You can install it by yourself, without any damage! ---------------------------------------------- My motorcycle is Kawasaki z900rs cafe. The material of the product is plastic. The looks after modification has become beautiful. When there is sunlight and when there is no sunlight, its texture is different. I use it and feel the wind resistance on my chest is reduced. Lead to an improvement in my driving experience! Its installation does not need to damage the car, and it can be installed by itself. Webike delivery time is very fast, I am very satisfied! Powered by Google Translator View detail
It's not a mokko-feeling shape, but a gentle curve with no distortion and high texture.
After struggling with Zero Gras, Pooch, and MRA, the beauty of Curve and a moderate [Color] I was attracted to Smoke and bought it.
As for the wind blow of high speed, the direct hit from the chest to the upper part has been drastically reduced, the world of silence where nothing is felt if you get down with a little bit of concern about hitting your shoulders (laughs), the satisfaction level is higher than the Zero Gra that I bought before, and the fact that I corrected it with File about 1mm of the mounting hole is cancelled!
View detail
I couldn't put it on
I purchased it for NC29, but the width, etc. did not fit for some reason, so I bought it on the Mirror Bracket side The size on the Cowl side is different from the other, so it could not be fixed
There was no problem with the installation of the original NC29's, so I don't think it's a body issue I think
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
Rectification effect, strength, strength
Screen in Japan
Accuracy was well done and it was Bolt On
It also improves wind protection and makes driving on the highway much easier
OEMs really do have Screen, don't they? You'll get about as much wind as you can, but this is the solution
[Color] I think it has a custom look to it because of the smoke
View detail
It sucks
I tried to install it on the 2012 GSX1300R HAYABUSA, but the shape of the car was not right to begin with It's not a good fit Doesn't fit? If it doesn't fit, tap it lightly with a plastic hammer, because there are individual differences, but the instructions I worked on the street and the cowl cracked When I asked for a response from the power supply, they said the Cowl was a no brainer I really shouldn't have bought it I am writing this so that the same damage will not be repeated View detail
z900rs transparent windshield
I think it looks better than the original one. Easy to install, however I did swap the plastic bolts that came from the package to normal bolts for a more secure install. View detail
I am generally satisfied.
4 ~ 5cm higher than genuine. Compared to genuine, the effect of the wind has increased to about shoulder height. Fatigue is greatly reduced. Looks like a genuine state, it is very easy to replace, and the price is reasonable. I recommend this product. The included sticker is bad :) ps. I am a non - English speaking country, so there is a limit to the expression. Look at it. View detail
As expected
Some Ripro products have a sweetness in quality, and if possible, I do not want to use it much, but in the case of Parts where OEM Product is out of print, there is no choice but to rely on Ripro products. In the case of overseas products, we may encounter products that are not accurate and can not be installed unless processed. So this time, the most important thing when choosing Screen is quality. Since ACRYPOINT's products are made in Japan, it was as expected quality. I think that the price is affordable. View detail
Taka 3 cm. But 3 cm
Installation is Hexagonal Wrench one, Bolt 6 ten times to remove and replace only 10 minutes work.
The shape is comparatively close to NORMAL, especially I do not feel like changing Large, but 3Centimeter It has become longer As the wind that is indeed running is changing the flow seems to make the high speed running a little easier.
It is more smoke-sensitive than I thought, and although I see Black CROSS in the picture, visibility is not so bad.
It is not easy to see somewhat at night, but it does not mean I can not see it.
It was worth replacing it with a feeling that it looked tightened.
View detail
There is transparency and I think that thickness is also solid. After is which this transparency has?
There is transparency and I think that thickness is also solid.
After
is which this transparency has?
View detail
since a wind is equivalent to the lower part of a Helmet and it is very hard to run it even if it carries out in the inner middle whose angle adjustment is possible at the time of a highway run (it is satisfactory if an angle is formed most, but it is not
since a wind is equivalent to the lower part of a Helmet and it is very hard to run it even if it carries out in the inner middle whose angle adjustment is possible at the time of a highway run (it is satisfactory if an angle is formed most, but it is not good in fine sight), a pure Screen is pure -- the windshield effect was expected and this article that a 20-mm overall length was longer was purchased.
attachment is dramatically easy only by removing six Screws which have stopped the pure Screen and attaching this article.
Although the vehicle type which had ridden before also exchanged Screens, a hole did not suit and troubles were suffered, but this article has a hole exactly and it has attached it satisfactorily.
Although the color of the
Screen is a gray Smoke, it is well with the color of a car body, and it is pleasing.
Moreover, the Screen was effective in the Meters which were hard to see at the time of fine weather, and the another attached screen of the Navigation having hidden with the sufficient degree from direct sunlight, and having become legible by the favor which is a Gray.
Although it was the most expected windshield effect, it compared pure and was an improvement of a some grade.
Since the upper part is not drawing the curve and the Screen is not necessarily extended top 20 mm even if die length is extended 20 mm, there is no method.
Even if it carries out after [
attachment ] high speed operation, he gets the jitters under run, there is no sound, and there is no problem.
The
windshield effect is used being pleasing, although it was restrictive.
View detail