Reviews
Trusted KTC
[How is it used?
Purchased a new Driver because I lost the one I had been using.
I bought this product because I thought, "If I'm going to buy something, I'm going to buy KTC!
Was the one you received as per Image?
It was as per Image as it was a product I had originally seen.
How was your experience with it?
It is easy to grip and use, and I felt that it is a Driver that I will be able to use for a long time to come. The construction is solid, so I think it is a large difference from cheap drivers.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I've been using it for years.
The handle is large, so it is not suitable for light turning.
The precision is outstanding, and I guess KTC is made in Japan.
The part to turn with force is also secure, and it is hard to use other cheap tools.
View detail
Easy to use
[How is it used?
The size of the Fixing Screw of the Generator Cover is Large, so I purchased the No.3 number because the normal Phillips Screwdriver was almost tarnished.
Was the one you received as per Image?
As shown in the picture, it was bigger than I expected, but it was just right for my use.
How was your experience with it?
As described as a firm Fit to Mt. Screw, it was Firmly engaged and did not feel like it was going to lick at all.
I thought it was comfortable to hold and very easy to turn.
The hexagonal shaft makes it easy to apply Torque, and it is also used as a penetrating driver, so it is likely to be used more often in the future for maintenance of old cars.
[Points to note]
It is difficult to get a sense of size, but for the 1st pc Penetrating Driver, No.1 or No.2 is good.
I chose No.3 because the Screw mountain I use is a bit deep and wide.
How did it compare to other products?
I only had a Phillips Screwdriver, which I didn't know well at Homsen, but it is incomparably better than that.
The ease of use, such as the feeling of fitting snugly to Screw Mountain and the ease of gripping, is good for the price.
【Review】
It was easy to use, as it is a highly rated Driver.
For light maintenance, an inexpensive one would be fine, but for those who do heavy maintenance, it would be worthwhile to have one pc.
View detail
Easy to apply force
I bought this to replace the Driver because it was getting tired.
As KTC claims, it has a shape that makes it easy to apply force.
The cross-section is almost square, so I don't think there is any driver that can compare to this product when turning the screw with LargeTorque applied anyway.
On the other hand, once the screw is loosened, when you turn it round and round, it requires a hang to remove it at high speed because it is low geared due to its rectangular shape.
I have a lot of opportunities to turn a stuck Screw, so I wanted a Driver that could hang a LargeTorque anyway, and I like it.
Since it is a Penetrating Driver, it can be used by tapping it with Hammer.
I once beat GunGun to the point of destroying Driver, but I can still use it today without any damage.
The precision of the tip is also well done as only KTCBrand can do, and as long as you choose the right size, you will hardly lick it.
Also, since it is magnetized, it is less likely that the loosened Screw will fall off.
Because of its overall thickness and rigidity, it is difficult to access narrow gaps, but I use different drivers for the right places.
View detail
Easy to grip, though.
It is not suitable for twirling.
The accuracy etc. is preeminent, and it is as if it is KTC.
You can turn the part with force without worry.
However, it is a little large pattern to use for motorcycle maintenance.
I'd like to see a small one in the line up too.
View detail
KTC is the best
It is easy to grip, the rigidity is high, and it is hard to lick the screw, and it is a first-class product indeed. View detail
Nice touch!
How good quality and design with a lumpy feel and considerable weight. I bought it as a hobby. This is a PenetratingDriver and the axis is square and can be turned by MONKEY. Sounds good. View detail
Easy to use
It was very good to use, so I tried aligning the remaining 2 Size.
Compared to the way I do not understand it is still easy to use.
I'm thinking of buying Minus too.
View detail
The first step of the tool
Until now I used cheap tools from the Home center. Eg was also organized without difficulty, so there was no problem, but since Bit has deteriorated, I tried purchasing daringly. I was able to purchase it cheaply because it was Sale.
It is a feeling I used, but as expected it is a Kyoto machine in the world. Bit's snag is perfect and it is very comfortable! The handful is moderate Large and easy to use! Plus is cheap, but it is troublesome to lick it, so even if it's at home center, you can put things securely even a little excited I think that it is good! Plus and Minus usually do it also, so I think that I do not lose it if I have one! One KTC for my family!
View detail
I think it's good.
I was using Vessel's Wooden HandlebarDriver, but as the number has decreased and it began to slip, I replaced it..
Compared to Wooden Handlebar, Rubber's wartsboot Grip is not slippery, it is easy to put power in a square.
The tip does not exactly engage with Screw and it does not rise.
Stand up Driver and support your butt with your index finger Round and round When you turn it also fingers are likely to hang around the square corners.
Length of shaft is a bit short, but it is easy to put force and can also apply Wrench with Penetrating formula.
It seems to be heavier than the drivers of other companies, but I think that it does not matter so much if it is the frequency of personal motorcycle maintenance.
View detail
It is a shame driver
Driver uses WERA, PB, Vessel, TONE, SIGNET and so on.
I purchased and used TPMD 18 of this Driver 8 book KTC and used it as a comment.
- Because it is rectangular, power comes in, but it is unsuitable for continuous turning and heavy.
- The coloring of + and - is easy to see, Design is also good.
- Is it due to chemical adhesion? "KTC" Label got peeled off (Crying).
** Label should be printed or engraved (Secondary disaster prevention).
I tried using a high Driver, but I say it is ownership desire or quit with self-satisfaction.
After all, I repurchased KTP's LTPMD 126 that I used before.
For me this is the most inexpensive and Recommendation.
Although the number is different, it is 2000 yen cheap even for the same KTC!
View detail
Manufacturer goods, quality is different to drift.
When holding the part firmly and turning Screw
Torque will be applied steadily and Screw will be knocked
Worry is drastically reduced.
When saying things, you can hit the bottom with Hammer
It is made of Gold genus as possible.
Very easy to use Cost performance
It is an excellent product.
View detail
Automatic for Vehicle wanted it to be shorter (number 3)
Since the Bar End of our Motorcycle is tightened with Screw lock + strong Torque, teeth do not stand in the usual Driver, but you can remove it with this Driver.
Also, so there is no place to use No. 3 so much (number 3) If you have one item - - - I thought, please do not do too long for automatic for Vehicle.
Recent automobiles are made Small as they make it Small, so there is Screw in the back place, even if there are places where parts can be seen - - - Depending on Manufacturer, there are things that are not easy to maintain.
In our Motorcycle, there may not be necessary for Motorcycle as there are only places used only for Screw of Cover of Air Filter, Screw of Battery terminal, Bar End.
However, the impression of Japan Manufacturer was received as truly as making the product itself.
View detail
Driver of count 1 has few scenes that can be used
Since I purchased Penetrating type Driver of the same series, I tried to purchase this product with the first count by trying to arrange it in one place, but now I can not find a place to use in our Motorcycle.
So I tried using it for purposes other than Motorcycle, but again I choose Screw for automatic for Vehicle.
Although I can turn it without licking firmly, I can not turn Screw which can be turned by No. 1 Driver which is not Automatic for Vehicle of other Manufacturer.
If you put it in a tool box it may be useful time someday because it is a Penetrating expression, but I think that it is not necessary to forcibly buy a person who is not necessary so much.
(Since it is heavier than Non-Penetrating one, it will increase the weight of the tool box... )
View detail
We do not recommend regularly, but where we need power ○
Not to mention Japan Manufacturer, but more than anything, price is cheap for Specifications.
Although it is an impression of using it, I do not recommend regularly because Driver itself is heavy.
I think that there are individual differences, but the handle is not cylindrical and it is square "Hold firmly and put your strength" It is very easy to use for minutes, but it is so tightened so strongly (removal) It is hard to use for the part that you do not need.
Also, as mentioned earlier, the Driver itself is heavy, so to handle lightly it needs to be strong so it gets tired when used continuously.
It is a bit disappointing that it was heavier than other Manufacturer's Penetrating formula, but it seems that the strength is so high.
View detail
Easy to use
It is easy to have a sense of rough feeling of Rubber rubber and a square of Grip part and to put in force. When Screw is stiff, it requires pushing force and twisting power, but it is easy to put in force. I like it more than a round hand. Because it is a Penetrating formula, you can knock on the head of the handle. I can recommend it.. View detail
Good tools
Even if WAKOS Raspene was applied, it did not loosen and it did not loosen even if you hit it with Penetrating Driver Plus screw of old vehicle.
Since it is structured to be able to apply 12 mm Double-end Wrench, with both hands "Turn while pressing" I feel like I can work the ideal of. I purchased it with a feeling that it might manage somehow.
The result is that Screw has loosened quite easily.
Double-end Wrench can be worn and easy to put in the power of the grip part was just right.
Again, tools should buy good things.
I think that it became cheap shopping as a result.
Especially since Screw at the head of the Plus is easy to knock out, we recommend using a good tool like this Driver.
Because it is Large strange since it is noisy.
View detail
The Driver of safe KTC was chosen. since it is penetration Type and a Hammer can strike the back of a handle -- -- I regard many things as probably user-friendliness being good. -- the time of however, being purchased, since it is sho
The Driver of safe KTC was chosen.
since it is
penetration Type and a Hammer can strike the back of a handle --
-- I regard many things as probably user-friendliness being good.
-- the time of however, being purchased, since it is short more than it imagined --
-- I consider that it is better somewhat to choose slight length.
(it is hard to use a bad point is Colet (although it is whether to be in - -;
explanation, since the tip of the Driver is the
magnet, there are no
worries about a screw thread which are attached, are removed and are sometimes dropped!))
View detail