Reviews
Necessities
[How is it used?
I compete in Enduro races with my RM250, and since it is a 2-stroke, I often have to change plugs, and I have been using this plug wrench for a long time.
I lost it during a Race the other day and had to buy it again. My Machine does not have good access to Plug, so I have to choose this Wrench.
Was the one you received as per Image?
As per Image. And I used to use it.
How was your experience with it?
The length is still exquisite. It is possible to reach the Plug by passing through the Glasses. The Glasses part is notched so that it can be inserted through the plug's guyliner.
[Points to note]
How did it compare to other products?
I think there was a good one from HondaOEM Parts, but I heard through the wind that it has been discontinued.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
A parallel two-cylinder 2Cycle can reach it!
I purchased this product to use for R1-Z.
So far, I have not had to replace the plugs on the road, but I have a set of plugs and this Wrench tucked under the Seat.
Please note that if you have a parallel TWIN 2Cycle, it has a shape that can be used donpically, but if you have a 4Cycle or other Plug in a secluded location, it is almost impossible to use it.
In this case, we recommend a SocketType Plug wrench with Rubber inside to keep it from falling off.
This Wrench has a notch that allows the Plug Cable to be inserted even in tight spaces.
It is convenient to have one because it is not hexagonal and can be tightened little by little.
View detail
A must-have for any 2-stroke motorcycle rider
Many 2-stroke motorcycles have a plug sticking out of the engine, so it is easy to access the plug by looking through the engine from the side.
If it turns round and round with Wrench etc. without using the Plug socket etc., it is possible to remove immediately, but when it roams with Net, it finds this commodity which seems to be more convenient, and purchases.
Normally I would buy a tool that I can use for a variety of things, but this product is a tool for removing and installing the plug, and it's not a cheap 100 yen 200 yen tool, it's over 2000 yen. But when I actually used it, I wondered why I hadn't used it before! But when I actually use it, I wonder why I didn't use it before!
If you have a 2-stroke motorcycle and want to make maintenance a little easier, we recommend you purchase this product as soon as possible.
View detail
Anyway, it's easy to use.
I bought it for a HusabergTE125 Plugfor Replacement.
It's very easy to use because it's easy to turn in tight spots and apply moderate force. It's not too long, so it's hard to damage the Screw hole of the plug by overtorque. It is also a point that there are
View detail
You can use it even if the space around the plug is narrow.
? 【What made you decide the purchase?】
Even if the space around the plug is narrow, it is structured to fit in the plug.
? 【How was it actually used?】
As expected, Wrench caught tightly in the plug.
? 【Was it difficult to install? (Hard parts case)】
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
? [Is there anything I was disappointed about?]
Nothing in particular.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I think that it is more likely to be plugged even in a place where the overall thickness is a little thinner.
? 【Have you compared items?】
DRCRatchetBragWrench
? [Others]
I'm happy if the price is a bit cheaper.
View detail
Not suitable for Scooter
Buy for tzr50r Plug replacement. Bring it to the vertical engine, but it is somewhat unkind to Soroter's Horizontal Type. I think that it is necessary for ns-1 or nsr 50. View detail
Easy to use!
NSR250R (MC21) It is a very useful item for Rear bank's plug exchange.
Removing the Right Side 's Reserve tank, it is narrow, but you can swap it by holding hands from the gap.
It was a bit of time to take off the Fuel Tank outdoors as it became dark especially at the time of Touring..
It is very useful when it is called.
View detail
For KX85II Plug exchange
The Plug socket Wrench that comes with the KX85 II has no gap and can not be used when the Radiator guard is attached. So I purchased the Spanner formula Wrench. You can use not only Spanner but also Glasses.
It is a very easy-to-use tool with a texture similar to KTC product.
View detail
Since the Motorcycle store which has been indebted was using it, it purchased.Since practical use is considered and it is made, it is satisfied.since a size is also good exactly -- in-vehicle -- I want one more for business -- coming out -- the shin.
Since the Motorcycle store which has been indebted was using it, it purchased.Since practical use is considered and it is made, it is satisfied.since a size is also good exactly -- in-vehicle -- I want one more for business -- coming out -- the shin. View detail
B Plug (width across flat of 20.8 mm) as used in the field of the part number of NGK -- it is a Plug wrench of business. Although the Spark plug of water-cooled 2 strike is on a head summit in many cases, in general, the Clearance of a Head, and
B Plug (width across flat of 20.8 mm) as used in the field of the part number of NGK -- it is a Plug wrench of business.
Although the Spark plug of
water-cooled 2 strike is on a head summit in many cases, in general, the Clearance of a Head, and a Tank and a Frame is small and it is difficult to access from a top by a socket end Plug wrench in the state of in-vehicle.
Although what is necessary is to carry out in す outside a Tank and just to tackle thoroughly, when fixing at a Garage,
on the way, good also for such a reason -- し [ it does not become precocious ] --
TRIAL Machine -- a Plug or ぶらせる -- since things are a certain things well, it is walking around with this product as a Plug wrench which can be used on the way.
Since it is specializing in the use as a Plug wrench, Jo is a thick mouth a little according to the hexagon-head part of a Plug as large Torque needlessness, but an overhang is small, and although the Flare-nut-wrench-like opening of a ring portion cannot escape an insulator part truly, the Terminal part can escape and is quietly convenient.
Although
usage is restricted, since it is specializing in the limited use, it is a product with the raison d'etre of こそ.
It is not bulky in a cellular phone, either and uses conveniently.
View detail