Reviews
Perfectly designed
[How is it used?
Purchased for MONKEYZ50J.
I wanted to install a MikuniVM22carburetor, but it interfered with the Tank, so I bought an Intac Manifold Variable Attachment. I thought it would be a good idea to buy a Minimoto product for the time being.
Was the one you received as per Image?
I thought it was as shown in the Image and well made, so I thought it was worth the price. One thing I did not expect was that the variable attachments were thicker than I expected.
Was the installation difficult?
Installation is simple:simply mount it with the depressed side toward the front of the vehicle and fasten it with the included dish Screw.
However, the included countersunk screw was too long and could not be tightened, perhaps because it was a 4LMONKEY, so I bought a shorter countersunk screw separately and installed it.
How was your experience with it?
It has been working fine with no leaks.
The carburetor in question, however, I managed to install it.
However, the thickness of the variable attachment is quite thick, so I tried various angles, but it was too high and interfered with the tank, so I could only use it in a certain direction.
Even in that direction, there is some interference with the tank when the chalk is raised, probably due to the structure of the carburetor. At any rate, I am glad I bought this Attachment because without it, I would not have been able to install the carburetor.
[Included Parts:were they on?
Attachment that matches the inside diameter of the Gasket and intake manifold?
[Was there anything that disappointed you?
The thickness is still Neck. It is well made, but it would have been 5 stars if it were thinner.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Can be done without interference.
If you put "with Cell motorEngine" on MONKEY, you will not be able to install carburetor, so you will need this in high probability.
It depends on the Tank, but I was disappointed that the only angle on my MONKEY was where the Fuel Cock was about to hit Limit.
View detail
to adjust the angle of the carburetor
I bought it to mount the MAGNA50 carburetor backwards
Product name is [MONKEY Intake Manifold Adjustable Attachment] But the HondaHorizontal, including the SUPER CUB I think TypeEngine can be used to install anything
Normal cylinder head with 16mm in take port diameter ring and The ring of 22mm diameter in take port of regular head system is also included
If nothing is attached, the in take port diameter is 26mm with no steps It can be installed
Of course the mounting bolts (Hexagon Cap dish bolts) are included
In my case, I inserted a 22mm ring into the regular head of SPTakegawa It was installed with the
The upper and lower Gasket is also included, so if you just want to swing it around, this Manifold Variable Just purchase the Attachment and you're done
It will be a little forced, but if you prepare a long M6 Bolt, without pivoting, just It may also be used as a Spacer
MAGNA50 has Cell Motor, so Carburetor is installed backwards It's very difficult to do, but thanks to this Manifold Variable Attachment, it's a bit Only the light was visible
I haven't run it yet, but I don't think it's hard to suck secondary air as the cutting accuracy is fine
I didn't know these products were available at this price …
Minimoto is various
Personally, I'd like to have a long hole on the circumference for the plate bolt to attach to the cylinder head It would be nice to be able to fine-tune the angle if I could, but that's asking too much, lol
Overall, the cost performance is good and this is a product that can be called a Recommendation It is
View detail
Maybe it's good
When the engine of MD90 was replaced with the CT110 engine, the carburetor intake was used I bought it to change the face
The gasket is very solid and well designed
The use and performance side of things is still to come
View detail
Used for C50 CUB
Used for acquaintance's C50 Bore up
Outside for MONKEY IN Manman and PE 28 Carburetor Normal head (High Camshaft)
I had not decided whether to move the carburetor sideways or before, so I'm MONKEY mani so either KITACO swinging 16 pie (Because it is Normal head) I was planning to purchase, but if Minimoto was the way I knew that 16 and 22 could be changed with Attachment. Even if you change the Head you do not have to buy again and there is also the possibility to divert it to another car Horizontal Type.
I am using the KITACO version of 22 for my own CUB but this is useful
We sell maniku more finely from other companies, but the price is also the price and the corresponding carburetor will be limited (If Insec Typecarburetor, can I respond with insurance change?) So KITACO will be able to repurchase mani again and of course you can use it for Horizontal Type other than CUB (Attention per frame as Adapter mani becomes high)
This time Normal head lightly spreading port so I will set it up with 16.
Although it corresponds only to MONKEY, CUB is not machining without pon attachment, is not it also attached other Horizontal Type?
It is JAZZ between Frame and MAGNA It's DAX I do not know solo but from MONKEY is there a narrow Horizontal Type between Engine and Frame?
View detail
It is the best adapter! I got it to fit mikuni VM22 carb to 125cm³ chinese engine with starter on top: there was no long 26mm manifold and short one should be rotated because of starter position. Old adapter was with rubber ring which has destroyed and e
It is the best adapter! I got it to fit mikuni VM22 carb to 125cm³ chinese engine with starter on top: there was no long 26mm manifold and short one should be rotated because of starter position. Old adapter was with rubber ring which has destroyed and eated by engine after 10000km, I had to change burned-out exhaust valve. Now there is no more airleaks! This adapter is flat and well made, it perfectly adheres to manifold and engine surfaces, new gaskets in kit is very good too. Also used some grey silicone sealant on тоp of mounting bolts to expand the contact surface. Now I can put together my big 26mm carb, 26mm short manifold and 26mm engine intake port for smooth airflow! View detail
Convenient Items!
When entering VM 24 carburetor it can be installed angularly if it is the attached Manifold, I learned this acquaintance to a acquaintance.
It is convenient to be able to adjust the angle, but to Manifold's Size
I am glad that the color that is also included is around.
Thanks to this Parts I was able to install it properly.
View detail
For carburetor adjustment
Usually I think that it will be used for carburetor's neck pretense, since it is hard for carburetor adjustment of CHALY, I want to offset a little carburetor upwards. However, I decided to cut Frame as expected. It may be just right if there is one centimeter thickness. It is also ◎ that the caliber of Adapter is 26 millimeters, ◎ that Gasket is not an O-ring ◎, Sara Screw is not Husagonal but Plus ◎, the making is surprisingly good feeling.
View detail
For mounting pc20
When I tried to attach pc 20 to MONKEY, I used it instead of Spacer because I hit Cylinder, so I used it instead of Spacer! I thought it was Screw of Plus but it was Screw of a hexagon hole! Personally I hate Screw of Plus So it was nice to be here. View detail
It is common. if it attaches to the place shifted one from the transverse plane, a gasket will not hit -- w -- common except it
It is common.
if it attaches to the place shifted one from the transverse plane, a gasket will not hit -- w -- common except it
View detail