Reviews
It holds a lot.
There is plenty of room for a helmet and a rain coat.
Top case of other Manufacturers is opened and closed with a key, but SHAD's Top case can be opened and closed only with Lever if it is not locked, so there is no need to worry about locking in a key.
When opening the package, the top case is packed only with Vinyl sheet, so you should be very careful when using Cutter.
When I took out the contents and opened the box, I found that there was no Base for installation....
If you look closely, you can see the Quantity at the bottom of the Case.:It was set, it's really Bigli.
Included Parts:InternationalManual (English Version) Instruction Manual (illustrated so you can understand it even if you can't read), Mounting Bracket, and Base (Cover). Parts:InternationalManual(English Version)
SHAD seems to be a manufacturer in Barcelona, but it is actually older than GIVI.
View detail
Good case from Shad
I initially liked this shad sh40 box for its appearance and size. It is not very big and at the same time not too small. It perfectly fits my set of camping stuff. Also,I do not plan to carry heavy things in it so as not to overload the back of the motorcycle. It looks great on my Honda cb1100. Also, for convenience, I purchased a rear back for the passenger. I also purchased the top red overlay so that he harmoniously recommend it for purchasе. View detail
Good comfort, and the design is great!
Grab Bar Carrier made by DAYTONADAYTONA [Daytona original] Toppings to
The BracketBolt/Nut things that came with it were not very available Sweat
We went to the home center many times and went through a lot of trial and error As a result, the method of fixing the car body with the joint plate of a thick plate together with the U shaped bolt A sturdy fixation is achieved as if it were part of the package
The Full faceHelmet(L) in the image is stored when the contents of the Top case are empty It is possible If I think only of my own use, I could have installed a Top case of around 50L
More than 3 years have passed, but there is no water in the Case at all, and it is a strong ally for rainy weather riding!
View detail
COSPA - Satisfied with the use feeling
I bought it with CROSSCUB acquisition. I also considered other Manufacturer items, but I chose this product on the Cost side. Easy to install, capacity has plenty, Helmet and Rain jacket go in. A tour of about one night is enough. I am satisfied with no problem in terms of use. View detail
Easy to use
Because it is used for YBR 125, I thought that the biggest hurdle to the extent that there was no sense of incompatibility, and as a result the capacity was set to 40 liters. Even though things are going in there somewhat, when inserting the full face again it is a little hard when inserting Rain jacket. Although it fits comfortably if properly tatami, it will be good if it should be a capacity of 45 liters because Rain jacket wants to be thrown in without being folded up because of its miscellaneous character (^ ^;
Usability is better than GIVI. There is no need to bother to insert Key every time you open and close, and you can lock it only when you want to watch out for a moment. It is easy to detach Box.
Personally there is no Brand consciousness like Box or something so price is high GIVIetc. I think that it is far better in COSPA than the Manufacturer in terms of practicality. it's recommended.
View detail
Ideal for Tandem touring
At the end of last year 10R (SS) To 14 R (MS) change to. I reviewed the model which my wife and Tandem can do and replaced it.
Considering loading and Backrest, we installed Top case. Since the upper part is flat, I judged that it could be loaded on Case and chose sh 40.
I'm satisfied with the best Size without too much Large.
View detail
Cospa best
I used this Manufacturer 's SH 29 for many years, but it was a bit hard for Touring for one night, so I bought more on SH 40. (Since I read 29 of others on 40 pedestals, I read another one's review)
The texture and making of Case is not particularly satisfactory, and it is comparable to GIVI and high imports. (But I can not taste possession possessing Brand things)
The good thing about SHAD is that you can open and close without using keys. Where you can put Camera and Ta Brett in and out with the key inserted in the Motorcycle is out of the question.
The attachment was attached to Carrier made by DAYTONA, but the position of the hole of the pedestal and the carrier was slightly misaligned, so there was no choice, so I made a hole with Drill in Carrier.
View detail
The inside also works as Small
First I thought SH26 would be sufficient and I started to use it, so I decided to say that again because of its convenience, so I tried capacity up. It is caused not only by the originally assumed Rain Wears and Body Cover but also by Inner and Over Pants that I took off, foods and souvenirs I bought.
● Body weight is Base - With Gold included 3. It is 9 kg. (Measured). Install Carrier (Manufactured by Endurance) Considering that the maximum Large loading capacity is 6 kg, including the influence on the balance and the cornering with the car case, I think that this Large fee is the limit.
● Comparative study was on SH 39. Design feels like it is modern today, against here it is rustic Square shape. Helmet selects here as if it is better to be square rather than round if considering ease of packing as secondary. After all the cheapness of actual sales (It became eligible for Sale in good condition) , It is convenient to look plain with a handle. The hand slid and dropped in SH 26.
● Base is Small TypeType (Included with SH 33, 29, 26) It is upwardly compatible with the Small Case and you can install it as it is (The opposite is of course impossible). I do not know if there is demand.
● There is space in Lens, you can afford it with a margin if it is about LED Tape. I tried it as a stop lamp for the time being.
Just to be sure, Reflector should be better, Emon's Reflective Protector (Quantity : 1 Set of 2pcs. ) I pasted it. Size is also exactly good, there is no cheapness like Reflective Tape feeling good. In addition, as insulation measures in the summer, I plan to paste insulation Seat inside.
● And every time, Bracket's position was troubled. The interval is as wide as possible, before and after Quantity : Pair (for Left and Right) Based on the condition that Base is not going too far back, the result of trial and error in the determined Screw hole is this. Attention also needs to be paid to Base distortion due to excessive tightening, and it is handled by Nut and Washer on hand. I pasted Black Film on the part where Bracket seemed to be visible from the outside.
View detail
I feel like I can go to Touring anytime!
It is a Rear box that I use for the first time, so I can not compare, but I have a take, I do not have to lock the keys one by one, and I feel like how to tighten the lid even if compared with other companies' things.
I do not know if it can be used for a long time, but I think that I will choose the same Manufacturer next time.
View detail
Only installation is difficult point
Klx 125 We attached it to the classic DAYTONACarrier.
Givi's easybox was the subject of consideration, but I felt the appeal of opening and closing without the width or key, decided here.
As in many reviews, satisfactory stability feeling can not be obtained with only the attached parts.
I bought a commercially available 196 mm Bracket and a 50 mm long dish Screw and forced it.
Or, I think that it is not assumed from the beginning that it will be completely installed only with the attached parts.
The purchaser 's efforts are premised products.
It would be impossible to respond to a vast array of carriers.
It took quite some time for alignment and purchase, but I was able to fix it tightly.
Also, we purchased the Hologram Chiyogami paper which is a reflection part at Daiso and realized the red color by pinching it.
Base becomes Large aside, it will be a slightly different appearance, but this is useful for sticking things with this.
I have attached Diske Screw which I did not use to Base instead of Loading Hook.
Unlocking opening and closing is very convenient, but opening and closing in the first place is not a little Smooth.
Moreover, it is surprisingly a yawn exterior, and it scratches immediately as it rubs somewhat.
Capacity is 40 Liter of truly, Mesh jacket and Commuter Bag, Rain jacket can be put in room,
When we paid a big big cap and helmet of Helmet's tour cross 3, I finally crowded Mesh jacket and it got to go in or not.
Tour cross3 is just too big !!
View detail
I bought it for going to Camping touring
I bought the first thing in SH 29, I found a handy thing if the Small article goes in, but when it comes to Camping, I have to pay a fair amount - - - I searched for SHAD, I got to this product with its top side flat. I also think that I will do it because I was attaching Rubber ties to this product and a hook for loading, even in WEB search.
Although it is Storage Space, ARAI's Full face and Mesh jacket are affordable and there is room to enter a little Small objects. Because of the same Manufacturer item, we also wanted to thank the pedestal on which SH 29 could be installed. It is a shame that Reflector became White, but I felt it was enough as a function.
View detail
Because the top of the lid is quite flat, things are easy to put on!
It installed in CBR 250R.
Considering the appearance of Motorcycle of this Class
Is not this the most Large?
From now on Large will be active in Touring.
At the same time I also ordered Backrest but it will take 2 months and I will reorder temporarily Cancellation!
The one that I made four stars was a gold item to fix to Carrier
1 pc out of 4. Because the shape was different, etc.. What was troublesome when installing
View detail
SHAD SHARE SH 40 Top Case Black
Design and prices are complainant, but
After taking the way of opening and closing up the part
It can not be opened unless it is hard to do.
It was easy to install for the installation.
View detail
Once attached, you can not stop !!!!
Finally committed to handling the forbidden Box!
Looking at this by turning it on (personally) Large I feel like getting into width, but finally put out my hand.
The reason for choosing this is because the shape is square!
In the case of Camping it is thought that it can be used as a table after removing it.
There is capacity as well as 40L, I think that we can load considerable luggage when combined with storage under Seat!
View detail
It is convenient to open and close without a key.
I installed it in SUZUKI GSR 250. I've been using GIVI's Box for many years, but I tried SHAD because it was cheap this time. (*^^*) GIVI always needed a key to open and close, but this box is not very easy to open and close so it is a very easy tin. * The only problem is that the holes are not aligned with the GSR's Multi Wing Carrier at all.
I drilled a hole in Carrier with Drill.
View detail
I arrived at DAYTONADAYTONA Multi Wing Carrier.
Purchased with DAYTONADAYTONA Multi Wing Carrier for the purpose of loading up for use in commuting.
○ Material
The whole was textured a little Material : I think that it is similar to Case made by GIVI in Material of Plastic.
It is a fine touch feeling!
○ attachment
Installation instructions are enclosed and worked accordingly.
Everything is written in English version, but it is easy to understand because there is a detailed illustration.
The difficulty level is super easy!
Large cover step
(1) Put the foundation on Carrier.
(2) Bite the Spacer in the hole to use and pierce the screw.
(3) Put Bracket in the back and close with Nut.
(4) Attach a case to the foundation.
Tool used
Wrench (8) Milli
+Driver
○ manufacturing
Compared to other products square is a feature of Forme.
The quality of locking mechanism of Material and Case is high at low price.
The only drawback is that the mounting hole of the top box is the foundation Quantity : Pair (for Left and Right) It is close to being somewhat difficult to install.
Carrier drilling process is necessary due to this.
We used DAYTONADAYTONA Multi Wing Carrier for installation.
In these two cases the mounting holes did not fit easily and drilling was done on the carrier with the last resort.
Conformity is not good.
I think that Bolt of 4 long and short 4 each and 8 Spacers are included and it is possible to fix everything sufficiently. If you stop at least 4 places you can secure it firmly to the base.
○ Loading property
RPHA 10 PLUS manufactured by HJC (Helmet) When I put it in, I did not close when I turned the front. You can enter if it is sideways. I think that it is difficult to enter if the decoration of Rear's Ventilation is Large Hi Helmet.
It is handy if you use it at work as A4File comes with plenty of room !!
○ Summary
Because it is a square Forme compared with other products, there is no image of a blunt and disgusting Top box.
I think that it is a comprehensively superior product that does not sacrifice both loadability and appearance.
View detail
Outstanding Cost performance!
I think that it is as good as comparison with the high GIVI.
It is convenient to open and close the lid without locking.
Since the mold is rectangular, the internal space can be used efficiently, and baggage will be taken quite well.
It is recommended!
View detail
Parenthesis OK
It attached to the OEMCase holder of BMW R1200R.
Because it did not fit with the attached gold tool, we installed and attached Aluminum's L-Type Angle material.
Style after installation is Parenthesis nice and capacity is satisfied.
View detail
Top case (Rear box) Replacement
Until now Wise GEAR (Manufactured by GIVI) I used Box.
It was an ordinary Large crime saying that Helmet will not enter if you enter Rain Wear. Moreover, it is too popular and I see it well, so it seems a bit boring for me who is a transformational chick who seeks something different from other people (Lol)
The user of SHAD is still few, and I chose SH 40 as the size to which Helmet + Wear + Gloves will enter.
Although it seemed to be Large too much when looking at Single Body, when installed it does not feel Large Kisa. I think that the lid is not round and it is the reason of Refreshing Design.
Translation in the installation document (Please do not enter here, but Illustration could easily be installed. However, it may be a bit confusing to those who attach Box for the first time, "Translation (Please enter here) I want a notation" I lowered the evaluation by one. The product itself is satisfied with Large. It's a nice feeling ♪
View detail
It is the best match Case for PCX !!
With exactly good Large, the overhang of the width is also within the width of the Handlebar so there is no problem when traveling through the city. I installed it on the Carrier stay of WirusWin, but it was necessary to process the hole enlarging Large. Processing was Large strange because Carrier stay is strong. If GIVI it is unprocessed, it seems possible to install, so if you can not process it, let's buy GIVI obediently.
View detail