Reviews
Fits: HONDA CBR600F, HONDA CBR400RR, HONDA CB750, HONDA CB400SF, SUZUKI IMPULSE400S, SUZUKI IMPULSE400, SUZUKI RF400RV, SUZUKI GSF750, SUZUKI RF400R
Fits front forks with CB1100 ABS of some years.
[How is it used?
I purchased the Fork/Caliper pitch 80mm/40mm to fit an older CB1100 Fork with ABS.
Was the one you received as per Image?
Quality is as high as the Image.
Was the installation difficult?
Basically Bolt On, but if it has ABS, it is better to install in Shop to make it work properly.
How was your experience with it?
It is well made and feels secure. I think it is indeed Active.
Recently, CHINA products have been distributed, but there are some cases where the products cannot be installed due to insufficient accuracy or defective products.
[Included Parts:were they on?
It comes with Bolt and Shim.
[Was there anything that disappointed you?
None in particular. Satisfaction level is high.
▼ CB750 (RC42) It is the same pitch as the Fork of the STD Disc and fits the diameter of the STD Disc.
View detail
Fits: YAMAHA XJR400S, YAMAHA XJR400, YAMAHA TZR250, YAMAHA T MAX, YAMAHA SRX600, YAMAHA RZ350RR, YAMAHA SRX400, YAMAHA RZ250RR, YAMAHA FZX750, YAMAHA RZ250R, YAMAHA FZX750, YAMAHA FZR400RR SP, YAMAHA FZ-6N, YAMAHA FZ6-S FAZER, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA R1-Z
RZ Caliper support
Front forkTZr on RZ250 (3ma) I purchased this product to equip a Brembo caliper to a vehicle of
The texture is good and fitting is no problem.
I think it looks good with the meat removed.
View detail
Fits: YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250 C, YAMAHA MAJESTY250, YAMAHA MAJESTY125, YAMAHA MAXAM
This is a different Type product from the picture
I have no problem installing it.
The installation method of the Type is different from the image.
View detail
Fits: YAMAHA FZR400RR, YAMAHA XJR400S, YAMAHA XJR400, YAMAHA TZR250, YAMAHA T MAX, YAMAHA SRX600, YAMAHA SRX400, YAMAHA RZ350RR, YAMAHA FZR250R, YAMAHA FZ6-S FAZER, YAMAHA FZ-6N, YAMAHA RZ250RR, YAMAHA RZ250R, YAMAHA FZX750, YAMAHA FZX750, YAMAHA FZR400RR SP, YAMAHA R1-Z
Perfect accuracy
I've used their Caliper support in the past.
Again, the Center came out well with the pimping and no problems at all.
It also comes with a Shim for adjustment, but I didn't need it at all.
It looks chic and Large satisfied.
View detail
Fits: YAMAHA FZR400RR, YAMAHA XJR400S, YAMAHA XJR400, YAMAHA TZR250, YAMAHA T MAX, YAMAHA SRX600, YAMAHA SRX400, YAMAHA RZ350RR, YAMAHA FZR250R, YAMAHA FZ6-S FAZER, YAMAHA FZ-6N, YAMAHA RZ250RR, YAMAHA RZ250R, YAMAHA FZX750, YAMAHA FZX750, YAMAHA FZR400RR SP, YAMAHA R1-Z
Center
I used it on my RZ250RR
I'm happy with the Center without Shim!
I recommend it because it looks good and isn't expensive
I've got over a thousand miles on it now and no complaints
View detail
Fits: HONDA CBR600F, HONDA CBR400RR, HONDA CB750, HONDA CB400SF, SUZUKI IMPULSE400S, SUZUKI IMPULSE400, SUZUKI RF400RV, SUZUKI GSF750, SUZUKI RF400R
Mounting on 92 cb is complete!
Good thing. In addition to Brembo, we have confirmed that the 40mm universal caliper is also compatible. It fits very well. Thanks to this, it was mounted safely on the old cb. View detail
Fits: YAMAHA FZR400RR, YAMAHA XJR400S, YAMAHA XJR400, YAMAHA TZR250, YAMAHA T MAX, YAMAHA SRX600, YAMAHA SRX400, YAMAHA RZ350RR, YAMAHA FZR250R, YAMAHA FZ6-S FAZER, YAMAHA FZ-6N, YAMAHA RZ250RR, YAMAHA RZ250R, YAMAHA FZX750, YAMAHA FZX750, YAMAHA FZR400RR SP, YAMAHA R1-Z
Just fit
When using Support, Caliper seems to be hanging in many cases, so it was a bit uneasy to install, but I felt relieved that the position did not go down to that point.
Because Front fork 's Bracket is Black, I chose Black Anodized, but it was Large Correct Answer. I looked nice and did not have much afterthought, so it was good. There is a slight gap between Bracket and Support, but I felt that Parenthesis is good in reverse.
Let's put the Center firmly in place when installing. There are quite a few individual differences in vehicles. It is safe because it comes with Shim which seems to be sufficient.
However, because the attached Caliper bolt can not be felt like for building materials, I replaced it for Taper type. Although it said, although it searched quite a lot, I think that there are almost no choices of Bolt.
View detail
Fits: KAWASAKI BALIUS, KAWASAKI ZZR250, KAWASAKI BALIUS2
BlendCaliper essentials
I used it to attach Brembo caliper.
Built-in details etc. Is perfect.
It's my choice, I should have made Black - - -
However, installation and precision etc. , There is no problem in making.
It is awesome if it is a bit cheaper.
View detail