Reviews
No other Size
Used for Horizontal TypeEngine HeadBreather Hose 650mm 6mm Diameter.
After searching for a compact product that could be directly connected to a 6mm inner diameter Hose, we found this product, which fits easily into tight spaces and meets our objectives.
Just look at the picture and Quantity:I bought it thinking it was 1 Set of 2pcs. but in fact it is Quantity:It was 1 pc. so it was disappointing in terms of cosmetics.
View detail
Cracks soon.
As an indicator for a pwk28 dedicated to a 2-stroke engine, it may lack strength and rigidity against vibration. Power Filter, which is heavier, cannot be installed, and only lightweight Funnel can be installed. View detail
Perfect
Quality and Texture Information Lightweight with Aleuminum I think it'll be nice and serve as a guard for the feeling of use Product 498-1300100 to purchase together It's difficult to install The cost performance and comparison price range with other products are similar. You can choose your favorite brand Delivery and packaging to WeBike in a week The packaging is great 2 concerns when purchasing is 1 set You have to buy 2 sets View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
Axle guard by SHIFT UP
Grom (JC92) I installed it in
Material:With DURACON, it came off from the base when it fell over and had to be replaced even though it was still usable and worn out, but Material:With aluminum, you don't have to worry about that, so you can use it for a long time.
I am very satisfied with the price and the color selection.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA CHALY 50, HONDA CD50, HONDA BENLY50S, HONDA CL50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MONKEY BAJA
Required if Bore up.
When the engine displacement volume is increased by bore-up, the scale of explosion becomes larger than that of the OEM, and the oil pump designed for 50cc of the OEM cannot keep up with the oil circulation. Therefore, we introduced the Reinforced Oil Pump.
[Oil pump's role].
The oil pump pressurizes and pumps the engine oil to circulate it to the various parts of the engine. 。 This enhances lubrication, cooling and cleaning effects.
[What happens due to lack of Oil circulation.
→ oil film breakdown and increased oil temperature.
The oil pump sucks up engine oil that has accumulated below the waist and circulates it above the waist. (The oil then flows back into the lower back to continue circulation.) Cylinder Cylinder head Camshaft Piston Therefore, if the oil cannot circulate properly, there is a possibility that these parts will break. To explain this in a simple way, if the oil film on the parts runs out, the parts will be damaged and the oil will be lost. [Burns in] it appears as if ... 。 Naturally, parts that are seized are unusable and must be reassembled.
Effects of Reinforced Oil Pumps
Circulation of the proper amount of oil reduces the burden on the parts of the drive unit. 。 Also, by increasing the Engine Displacement Volume, a larger volume of oil can be circulated to the engine, which generates more heat and thus cools the engine even more.
*OEM oil pumps are designed for OEM for 50cc, so if you bore up, you will have to reconfigure the oil pump with an enhanced (higher discharge) oil pump to match, or the oil will not be circulated in time.
This Oil pump has a capacity = amount of Oil to send 。 If OEM Product is diverted, the capacity will be as follows ： Assuming that 50cc is 1.0, it is about 1.8 to 2 times larger.
good point
Heat generation from the Engine after driving has subsided.
Even if you go for a long ride and turn it around a bit, there is no longer any heat drop.
Idling is stable.
A bad point
I also removed the oil, removed the →clutch cover, and replaced the →gasket.
It's worth changing, though (laughs).
When you bore up the engine, it is strongly recommended to install a Reinforced Oil Pump. If you are looking for a domestic manufacturer, SHIFT UP is the cheapest.
If the Bore Up Kit you purchased becomes useless because you were too stingy with the Gold amount, the cost will be large…. 。 Some of you may have assembled the Bore Up Kit with the NORMAL oil pump, but it is not a stingy PARTS, so I recommend not to drink that opinion too much.
If there is room, it would be even more effective if the orifice of the oil coming out of the oil pump is enlarged.
View detail
Almost the only external Stud bolt
Since DAYTONA's reinforced Stud was discontinued, there was no other choice but to purchase an external Stud.
However, I have heard that it is stronger than OEM, so I am hopeful about the performance of the one I chose by process of elimination.
View detail
MJQuantity for Keihin PBcarburetor by SHIFT UP:Set
I used it in the Carburetor setting of the C50SUPER CUB.
Since there are six different types, I was able to find a good spot by changing it out, running, running and changing it back in. I am very happy with the purchase.
View detail
Durability..
I am using it with Bessler's GoldenPad and the initial bite is thin. I read that the Floating Pin will be replaced at about 3000, but I haven't seen how much it will lose yet.
Really, at 3000, would it be tough to drive around town?
View detail
No durability
The quality of Rubber is poor and cracks immediately after 6 months. View detail
To balance with Rear...
When replacing the rear suspension, I used a RateUp spring to get the balance.
I used #15 Fork oil for the installation.
Spring with the same Variable rate as the OEM, but with a RateUp of about 10%.
I couldn't tell the difference myself. (^^;)
View detail
NSR50 being assembled
I am building a NSR50 from the frame up, and although there are a lot of cheap used rear suspensions on the auction site, I thought it would be a bad idea to mess with them, so I bought a brand new, moderately priced rear suspension from SHIFT UP.
I have not ridden the car yet, so I don't know how comfortable it is or how controllable it is, but I am satisfied with the cost performance.
Also, regarding the installation, I had to tap on the top and bottom of the frame to get the tight tolerances for the frame fit. I am not sure if this is correct or not, but I was able to install it.
View detail
I installed it.
The center fit was a little looser than OEM, but no problem. 1 hour of use on Circuit, even contact with the pad, no problems. Large sturdy.
The feel of the product is fine.
View detail
Xr100 with vm26
This manifold is just what I needed to fit a mikuni vm26 on my xr100. It's a high quality part and worth every penny! Will definitely order again! View detail
CUB to Blowby hose in!
CUB I put it on first, of the Blowby hose. The price was good and inexpensive. View detail
CUB to Blowby's extraction!
CUB I put it on my Blowby's and took it out. The price and construction are great. I would like to get one more. View detail
SHIFT UP
I like the products of this brand. I'm looking for parts to create a custom look for my Monkey. This product not only has a beautiful appearance, which is combined with other installed elements, but also has functional properties (engine cooling). I had great pleasure working with this part. View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
Exhaust Studs
These feel great but were missing the nuts to hold the exhaust on. not a problem but would be nice if they were provided as showen in the pictures View detail
Large seat knob that allows for the easiest operation by hand
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with an all gold anodized finish. About the feeling of use, While not the best product if you just wish to fill the open frame for a better cosmetic look as they are larger and protrude out, they would have to be the easiest operation by hand to allow for quickly gaining access under the seat. Products to buy together, Shift Up make some incredibly comfortable and affordable handle bars for the Monkey 125 that would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the seat knobs for my installation was very easy due to the ease of access and simple nature of securing the seat bolts by using your hand to tighten once the original bolts have been removed. Cost performance and comparison with other products, The pricing of the product is great. You receive a high quality part with a ergonomic design made from quality aluminum stock with a high quality anodized finish. There is a similar option available from Kitaco but at a higher price and with black as the only colour available. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA DAX125, HONDA GROM, HONDA GROM, HONDA MONKEY125, HONDA MONKEY125
It's wonderful!!!!
This is my impression from the simultaneous installation with OUTEX's Stem Stabilizer.
The front suspension has been strengthened and made stiffer to increase stability at the Corner!
View detail
Fits: HONDA XR100 Motard, HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 100
ape100 engine Knock Pin Set
There is no difference from the About quality and textured product It's not used yet. It's going to be used for engine overhauls Recommended if installation difficulty engine disassembly is possible Cost performance and comparison with other products It is easier to buy and use compared to std products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice when purchasing Since it is an aluminum product, it must be stored clearly I recommend this product if you do engine overhaul View detail