Reviews
Fitting
Wiring of the License Plate Light can only be done from the top of the Bracket, there is no hole to pass the wiring through. This is a waste because the design is so good…; Since the number mounting bracket, reflector bracket, and body are all fastened with the same bolt, it is necessary to pass the wiring through three holes, which is a bit troublesome and quick. However, since it is compatible with the Hook for loading and the design is good, I don't mind it once it is on.
Finally, be careful with the Tail lamp protection Cushion as it is hard to locate. I use a small amount and store the rest FOR REPLACEMENT.
View detail
Fits: YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R
Fender Eliminator is a cosmetically pleasing product, but its construction is subtle.
[How is it used?
Installed on a YAMAHA XJR400R 2007 model.
I didn't want to go with OEMFender because it seemed too fussy, so I went with Fender Eliminator.
I thought the Fender Eliminator itself was made the same way, so I bought this one, which was cheaper on Sale.
Was the one you received as per Image?
It was just as Image.
I felt it was heavier than I expected due to the material, and I am glad I chose black, although there were also products in a plating style.
Was the installation difficult?
For those who usually disassemble for maintenance, etc., it is easy.
The actual work itself could be done in about an hour.
However, as I will add below, it was very poorly made, so Large was strange.
How was your experience with it?
The bolt is securely fastened with a lock nut so that the bolt does not loosen while driving.
[Included Parts:were they on?
Instruction Manual 2 copies, DAYTONASticker
[Was there anything that disappointed you?
This is the most NegativePoint of this issue.
The instruction manual says to install the tail cowl with the blinker attached to the Fender Eliminator Bracket, but in reality, the blinker is covered by the bolt at the bottom of the tail cowl, and the bolt cannot be tightened without the blinker attached. However, the blinker is actually covered by the bolt at the bottom of the tail cowl. In fact, the blinker is covered by the bolt at the bottom of the tail cowl, and the bolt cannot be tightened with the blinker still attached.
I can't complain since it is only an Other Brand Product, but I was a little disappointed that it could be called an exclusive product.
Other items that would be helpful
I hope you will take a look at the installation points and hang:I have attached a video of the installation.
Availability and clarity of Instruction Manual:It is written in simple Illustration and bullet points, but it is difficult to understand if you are not familiar with it.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100
Well-fit and study kit
Installed this on my American ZRX1100. Instructions are included (in Japanese, which I read, but a translation app should work fine) and are detailed. Fender replacement is solid aluminum, seems very sturdy. Definitely cleans up the back and provides sturdy mounting for signals and taillight. Demerits: License plate holes are spaced for Japanese license plates, so you'll either need to drill out your plate, or the mounting surface if measurements don't line up. Mudflap materials do need to be cut by hand and rigged up to be secured to your frame - it can be tough to get a perfect fit, but the supplied materials come pretty close. You lose your tool kit box under the tail, but it looks like there's space for it. Maybe drill your own mounts if you want to try to keep it? View detail
Fits: YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom)
It was felt refreshed!
It was felt refreshed! View detail
Stylish!
Surprisingly many people are dissatisfied with the BOLT Shoulder Bag's Rear Fender, aren't they?
Installation should take about 30 minutes to an hour.
In some videos, the Bolt on the Fender side is removed and the Bolt is lifted up, but it was not necessary to go that far to do the work.
One concern is that when the OEMFender is removed, the coupler inside the Fender is exposed, so I am concerned about whether the Fender will be waterproof and sturdy enough to withstand large amounts of rain.
The overall construction is solid, so I think it will be safe from vibration.
View detail
Refreshing Rear
The rear area was refreshing and the reflector quickly loosened the screws and was gone! It seems that other people lost it too. Please do something about it, DAYTONA, or make it Nut to prevent loosening from the beginning, or put Spring washer between. View detail
DAYTONA Fender Eliminator Installation
I think Style is nicer and better after installation.
I felt that the Instruction Manual was very detailed and easy to understand for anyone to install.
I had a hard time installing the OEMBlinker, so if you are thinking about changing the Blinker, it might be better to do it at the same time.
Only the Wiring of the License Plate Light is a little unsatisfactory.
You can hardly see it once it's installed, but it would have been nice if there was a hole or something to allow the back of the Kit to pass through.
I wanted to open the Drill if there was one.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
It's Bolt On, but there is a problem only a little.
There is also a handling Instruction Manual, which is easy to understand, but some parts diagrams are different from real ones
There was something I thought. (There is no problem with installation)
Just remove OEM's Rear Fender and attach Body with Bolt,
Temporarily tighten all Screws, then push the Body as far forward as possible
It's okay to fasten it.. Otherwise, stop 2 RearCover 2 holes in Pitch
I think that it will be a little gapped.
View detail
Looks great- difficult to install
roughly a weeks shipping over to Aus. Instructions in Japanese so had to install via diagram. Not ideal as does not show you sequence and if you do not follow step by step you end up having to unscrew and rescrew to successfully install. Anyway got there in the end and it does look great. Allows you to reinstall your number plate light, however angle of license plate means the light is not as effective as previously. Good product, albeit fiddly to install yourself. View detail
Fits: HONDA CB400SF Spec-III, HONDA CB400SF Revo
Easy installation! But ...
I thought that installation was easy or not, but I was a bit embarrassed because I was still removing the original OEM Parts Number. I worked while searching Net so I managed to install it.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R
If it is a Fender Eliminator, this is a cheap pie
Although I tried to make WR250X a Fender Eliminator, I saw several kinds from other companies, but it seems to be strong in one piece molding, It is easy to do with this alone, so I chose this item.
Wrestling Tail of WR 250X got rid of and it got cool in Simple.
However, if you are singling by car type, I wanted you to turn on the Coupler of the License Plate Light for the car model.
I did not trust anything included but purchased separately.
View detail
Appearance Refreshing.
It is good that OEM's most RearRear Fender is shaped to prevent mud splash, but Black Material : Since Plastic is cheap and not good, I replaced it with this Fender Eliminator KIT.
I can not prevent the mud splash, but I am satisfied with the appearance refreshing. The LED of License Plate Light is also bright feeling.
Because the difficulty is Steel, it may be rusty and Wiring behind the Fender is exposed, so some waterproof processing may be necessary.
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Ninja 400, KAWASAKI Ninja 400
I installed it in Ninja 650
I installed it in Ninja 650. Since it is the same as Ninja 400, it will be installed. It was installed without problems. Fender Eliminator is Parenthesis nice! View detail
Fits: KAWASAKI NINJA250R, KAWASAKI Z250 (2013-)
Fender Eliminator Kit Various - - -
Each Manufacturer is Aluminum or Steel, License Plate Light is also OEM reuse, etc. There are various, but DAYTONA 's Kit includes LED License Plate Lamp, Slim reflector which is the product of Mr. DAYTONA.
I think that looks are personal and hobby can be divided, but in the case of Ninja 250 License Plate Light protrudes a little conspicuously?.
In DAYTONA 's Kit, it is possible to remove Blinker' s Bracket so it is a Recommendation for anyone who wants to join a pasted blinker.
View detail
Fits: HONDA CB400SF Spec-III, HONDA CB400SF Revo
Attach to cb 400 sb
Body is light weight Body and rigidity, reliability is good feeling. However
I can not understand the figure of the installation Instruction Manual,
Although the place to say is the Minus point, since Styling has been dramatically upgraded, it is a satisfying product.
View detail
Fits: HONDA CB400SF Spec-III, HONDA CB400SF Revo
As expected it is a special item. It was Just fit.
Because it is a special item, it was able to be installed without feeling uncomfortable.
With Japanese Vehicle Inspection Correspondence, the angle of License Plate is exquisite.
I thought that the description of Instruction Manual was difficult to understand, but I could install it in about an hour.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
It attached to CB400NC39.Attachment does not have a gap, either and it attached it easily.Although the rainy day also rode, the bottom of a sheet did not have most rain invasion, either, and was beautiful.Since the circumference of rear one was also felt
It attached to CB400NC39.Attachment does not have a gap, either and it attached it easily.Although the rainy day also rode, the bottom of a sheet did not have most rain invasion, either, and was beautiful.Since the circumference of rear one was also felt refreshed and appearance also became good, it is satisfactory. View detail
Fits: YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R
a webike Monitor -- -- it was felt very refreshed! A slim Reflector is lovely. It is if a part is not processed. A screw thread is not tightened. I think that the work of attachment manual was early completed more when the d
a webike Monitor --
-- it was felt very refreshed! A slim Reflector is lovely.
It is if a part is not processed. A screw thread is not tightened.
I think that the work of
attachment manual was early completed more when the details etc. of the
portion wishing [
] printing pointed out also by the Impression in the direction of very well others were incorporated in the manual and could
Obtain not only a number but the Point etc.
View detail
Fits: YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R
Since it is a type using a pure number plate illumination lamp, it is more modest in the price. Since a number angle is 45 邃? he seldom has a feeling called the fender less !. It has not leaped up strangely and is very natural. I also regard a
Since it is a type using a pure number plate illumination lamp, it is more modest in the price.
Since a number angle is 45 邃? he seldom has a feeling called the fender less !.
It has not leaped up strangely and is very natural.
I also regard a slim reflector as the fender less being matched.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R
Since the pure number stay extended for a long time was not unsatisfactorily pleasing, it fender-less-ized with the refreshing. Although it is attachment, Mayne's fuse will have been flown if it is working connecting a battery when carrying out wiring
Since the pure number stay extended for a long time was not unsatisfactorily pleasing, it fender-less-ized with the refreshing.
Although it is attachment, Mayne's fuse will have been flown if it is working connecting a battery when carrying out wiring of a license lamp.
Those who consider attachment by that after this need to work, after removing the negative terminal of a battery! The work of wiring itself cuts wiring of a license lamp from the first, and it is the easy work which connects wiring of attached LED.
A fender less is used, and it becomes more sharp looks, and is satisfactory!
View detail