Reviews
Difficulty in inserting into Lever is a drawback!
It feels good and will last about a year! The only …Minus is that it's hard to insert into the lever!
I can't get it in properly unless I put it in boiling water to warm it up… it rips if I force it in lol.
View detail
Not good
It was not good. I installed it once, but it didn't feel good. I took it off. It may be a matter of taste. View detail
PRO GRIP:#480 lever-grip product number: -- the vehicle type wide use goods corresponding to 74895 merchandise information -- detailed -- color:red inside diameter: -- 10phi die-length: -- please do not let * solvent adhere 75 mm - Lever grip which al
PRO GRIP:#480 lever-grip product number: -- the vehicle type wide use goods corresponding to 74895 merchandise information -- detailed -- color:red inside diameter: -- 10phi die-length: -- please do not let * solvent adhere 75 mm
- Lever grip which also controls vibration that it is hard to slide.
View detail
I can hold Lever firmly.
Lever grip is a pain to install every time.
It's a common method, but I use detergent to install it.
It is Large strange to put the head part in every time, but once it is in, it is Large strong.
However, if you struggle with it too much there, it will dry out and the second half won't glide and you'll end up with a thousand pieces.
However, the grip feeling when gripping the lever is completely different between having this and not having it.
View detail
Good for vibration countermeasures
Grip is also made soft material, vibration is not transmitted to hands and it does not get numb and it is saved.
Also in the summer winter, there is not much heat from Lever.
The interval between Grip and Lever is slightly short, so my fingers will hit you, but I think this is unavoidable.
I think that the price is somewhat higher, so I think that it is better to buy it at the time of Sale etc..
View detail
Good with this hand goods
It was attached to xr 250 before. First of all, Material : Rubber is good but Length is insufficient After 2 centimeters long it is good If it may be unavoidable on the material, but if you use it
Rubber twisted, so I used it a lot and lost it
Currently I use Silicon tube but this one is pretty good. I think that it is good as a product of this hand to those who are said to be not dedicated.
View detail
There is more effect than price
【What made you decide the purchase?】
In the midwinter the Left fingers were getting cold and in trouble.
【How was it actually used?】
The feeling of coolness from Lever decreases, and Touch does not feel uncomfortable.
【Was it difficult to install? (Hard parts case)】
I had a hard time installing it. I was prepared to look at other people's impressions beforehand.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I also prepared a Compressor, but in the end I just used a neutral detergent and water in Spray. As you turn it up, you go in and get in. If somehow we could attach one, we could do surprisingly quickly the second time. Work on a cold day does not recommend because Rubber will cure.
[Is there anything I was disappointed about?]
There is nothing special now.. I would be happy if the durability is good.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It will be in millimeters, but it may be a little longer.
【Have you compared items?】
I also have a Sponge type, but I chose this Rubber type considering Touch and durability.
[Others]
I bought Black because Lever was Black, but if you color it differently from Lever it will be Dress-up as well.
View detail
It got easier to grasp.
Lever is easy to grasp by installing it, and it will not slip again.
Because it has various colors, it can be used as an appearance Custom.
However, the installation is Large strange is Minus.
As a hang of installation, I first apply LETTER to LeverBody to make it slippery. Next, wind and grip Lever grip with Towel. Then you plug in Lever with your strength. I need familiarity and power, but I can not take it if I can attach it. Although it may slide with detergent at the beginning, please try as it will not slip if it dries.
View detail
I've been using a red sponge type one, but I felt like unifying the color to black and green, and so I bought this part.I can't compare it to my former one because the material is completely different.But it doesn't slip and you won't get tire
I've been using a red sponge type one, but I felt like unifying the color to black and green, and so I bought this part.
I can't compare it to my former one because the material is completely different.
But it doesn't slip and you won't get tired.
Your fingers will not slip even if you lightly apply the brake using the tip of your finger.
It will be a small decoration too.
It depends on your taste, but its performance level is what I really dreamed of.
The installation was quite hard, though.
Here's some advice.
First, you will find it difficult to pierce the tip.
You need to open it and press it in with both hands.
If you succeed that part, then you need to press in the remaining half, and then push up the upper half again.
That's how it goes. If you repeat this process it will fit in smoothly, I guess.
It won't move a bit if you try to press the upper part and the lower part simultaneously.
It says to refrain from using any solvents, but I applied some parts cleaner, because it didn't move.
There's no problem up till now.
Just apply a little and push the upper half, and then the lower half.
Finally adjust it to the place where your finger touches when actually applying the brake.
Though it was hard to install, I am satisfied with its performance for now I can grip the brake without slipping.
I also like it because the color has been unified to black and green.
View detail
Whenever it carries out Lever exchange, he is trying to certainly attach as improvement in a Touch, and protection of a Glove.purchasing, since a lever position becomes somewhat further in case of the Sponge type -- a Manufacturer -- although it is vario
Whenever it carries out Lever exchange, he is trying to certainly attach as improvement in a Touch, and protection of a Glove.purchasing, since a lever position becomes somewhat further in case of the Sponge type -- a Manufacturer -- although it is various, it is considered as a thing made from a Rubber certainly like these goods.It can ease, although the cold of the Lever of winter is not as a Sponge type, either, and I think above all that a feeling of operation becomes good in a completely different class.Although it is somewhat serious to let the swelling portion of a lever tip pass, attachment can be attached with a Smooth, if a Lever is wet with water.Saying that the Grease is stuck and a Parts cleaner is blown cannot be carried out to a rubber commodity (a Parts cleaner melts a rubber commodity.).a Gasoline -- the same -- it is -- since -- don't carry out by any means. View detail