Reviews
Even with the bike spending most of it's life out in the sun the black colouring shows no signs of fading
About quality and texture, I can confirm that the quality is great and the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This set of Honda decals just looks great on the fuel tank and even with the bike spending most of it's life out in the sun the black colouring shows no signs of fading. Products to buy together, If you are a fan of Honda bikes like myself then you could also add a some apparel from the Honda riding gear range to your cart so you look the part when you're out riding. Difficulty of installation, I can say the fitment of the decals for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the decals to help the adhesive have the best chance of adhering to the paint. Cost performance and comparison with other products, The pricing of this product is great. Your receive two decals that are of a good size and great quality from a well known brand. The pricing of decals similar to these that are part number specific to a bike will be much higher. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fuel TankRepair for the finishing touches.
[How is it used?
NSR250R (MC21) Repair and repaint finish of the Fuel Tank of
YAMAHA Super JOGZr Wing BlackDecal is also available in Red and Black, but I chose White because I wanted a Normal look.
Was the one you received as per Image?
It is my fault for not reading the description at all, but Quantity:Pair (for Left and Right) Of Quantity:This is a Set item. (If you make a mistake and use Quantity:2pc. I bought a Set lol)
The color and Size feel were as expected.
Was the installation difficult?
The tank is a three-dimensional shape, so it was difficult to align it with the actual object.
It is recommended to use masking tape to mark the corners of the transfer seat so that the corner of the seat and the corner of the transfer seat are aligned.
Also, once applied, the transfer Seat was too strong and tore off a bit when I tried to put it back on. I had no choice but to stick it as it was.
How was your experience with it?
As an OEMSticker, I have no complaints about the look and feel of the product.
The difference in the finish of Restore is considerable without it.
[Included Parts:were they on?
This Sticker and transcription Seat only.
[Was there anything that disappointed you?
Not particularly
【Review】
Quantity:Pair (for Left and Right) The product is in a "good" condition, and I am satisfied with the quality.
Please be careful only with the alignment when attaching.
View detail
Just looks great on the fuel tank of my custom build
About quality and texture, I can confirm that the quality is great and the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This set of Honda decals just looks great on the fuel tank of my custom build and even with the bike spending most of it's life out in the sun the pearl red colouring shows no signs of fading. Products to buy together, If you are a fan of Honda bikes like myself then you could also add a some apparel from the Honda riding gear range to your cart so you look the part when you're out riding. Difficulty of installation, I can say the fitment of the decals for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the decals to help the adhesive have the best chance of adhering to the paint. Cost performance and comparison with other products, The pricing of this product is great. Your receive two decals that are of a good size and great quality from a well known brand. The pricing of decals similar to these that are part number specific to a bike will be much higher. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Tank has been revived.
I put it on Tank after repainting.
It takes a little hang to paste, but after pasting, the Tank
It was revived.
View detail
Hardly!
It was difficult because it is a transfer type. when I put it on the tank of REBEL250, the surface with strong curve was against the tip of YAMAHA Super JOGZr Wing Black. when I peeled off the seat, the part of HONDA letters was difficult. it was torn and chipped. I bought it again and reapplied it. I tried to buy another one and reapply it, but it was still chipped somewhere. When I put it back on, I was still concerned about it, but to be honest, I am the type of person who doesn't care about details, so the next time I ride a motorcycle, I will look closely and I won't be bothered by it. View detail
It is quality and satisfactory.
It is quality and satisfactory. View detail
Parenthesis good
This is a purchase for the repainting of a GORILLA Tank.
It used to be the same Honda Wing Mark, but it was an old type, so I will try to repaint it this time as a New type Wing mark with Makeover!
There are many different colors to choose from, and the selection was fun.
The reverse side of the Package has instructions on how to apply the Sticker, so I would like to see it applied securely after the Tank is repainted.
View detail
Per Tank Cover installation
As well as the HondaDecal35.
Is the Application Sheet too sticky?
Or maybe it was the wrong time to put it up (laughs).
They took part of my wing (laughs).
Since the Flare part of the Fire blade is where I should have put it, I put one here for now (laughs).
I guess that means I should be more careful with the paste.
However, I think that buying from webike is probably better than buying from Amazon (guess lol).
Everyone, if you're going to buy something, buy it on webike (laughs).
View detail
It's so obvious!
I put it on the Tank of REBEL250
I stripped off the NORMAL sticker and replaced it with this sticker
It's more Large-textured than OEM, so it stands out!
It's easy to stick on
View detail
Pasting is difficult, but it is very good if it can be done well
It is a transcription type so it is difficult to paste on parts other than flat surfaces.
I got a little wrinkle.
I will challenge it again when I paint the whole time next time.
View detail
It became a good Accent.
It is Honda OEMWingDecal.
Quantity : Pair (for Left and Right) Because I wanted to stick it symmetrically, it took time to position it.
With Mr. Decal, Material is considerably thinner and weaker than Sticker.
If you paste even a little, you probably will not be able to repast.
Yukkuri pasted carefully.
What is durability like?
It's Shock when it's sober - - -
Size may have been good even if I went around Small one more time.
But I'm almost satisfied.
After all Honda wings mark suits you!
View detail
To paint Tank
I bought it for Tank painting.
Attention is necessary when pasting.
After sticking to Tank, finger etc all the way to stick to Tank etc. If you do not press it properly, you will peel off together when peeling the transparent SEROW Han.
Since I failed once, I was moved a little when the SEROW Han peeled off cleanly.
SEROW Carefully when peeling off the hanger!
View detail
I put it on Tank
【What made you decide the purchase?】
I purchased it because it was Honda's WingMark.
【How was it actually used?】
Vehicle tightened.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There is none.
[Others]
I pasted it on resin Tank. Again, Gasoline permeates resin Tank, so now it is full of bubbles.
View detail
One point
【What made you decide the purchase?】
I bought it because Fuel Tank was feeling lonely
【How was it actually used?】
When stretched to resin tank, bubbles can be formed, but it will not peel off.
[Is there anything I was disappointed about?]
There is none
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none
【Have you compared items?】
There is none
View detail
Since it is a Type restretching is not effective, cautions are required.When it stretches and paints by the Urethane Clear of 2 liquid mixture immediately, the paste of a Sticker has separated in some places.It may be OK one if it is after making it dry f
Since it is a Type restretching is not effective, cautions are required.When it stretches and paints by the Urethane Clear of 2 liquid mixture immediately, the paste of a Sticker has separated in some places.It may be OK one if it is after making it dry firmly. View detail
Once it sticks, the feeling of tension which cannot be removed will not accumulate.Moreover, ~ in which it failed.It is really difficult to stick on a curved surface.But a result is a Cool Sticker to the extent that it is absentminded.
Once it sticks, the feeling of tension which cannot be removed will not accumulate.Moreover, ~ in which it failed.It is really difficult to stick on a curved surface.But a result is a Cool Sticker to the extent that it is absentminded. View detail
If it is searching with the dent of the Tank since there is no Decal of a HONDA Wing though natural although re-paint application was carried out after shape correction, since the size also had a Decal of the same about cheaply, it will purchase. Although
If it is searching with the dent of the Tank since there is no Decal of a HONDA Wing though natural although re-paint application was carried out after shape correction, since the size also had a Decal of the same about cheaply, it will purchase. Although there is likely to be neither attachment nor a fear of separating since the quality which was able to be stuck was good to the extent that it did not know that it is almost [ in appearance ] pure at least by a light Gap, since it was attachment of a Film and positioning was completed simply, Probably, it will be OK since Urethane-Clear paint application as a Tp Coating was also carried out just to make sure (*'∀`). View detail
Since the car body was white and the sheet was red, the red Sticker was used. Since it is HONDA= red's Image, it sticks on right and left, and it is a Tune focused on appearance. COSPAR also does right and it is 。.
Since the car body was white and the sheet was red, the red Sticker was used. Since it is HONDA= red's Image, it sticks on right and left, and it is a Tune focused on appearance. COSPAR also does right and it is 。. View detail
The color purchased this time is a Pearl black. Although there is also a hit degree of light, and a photograph looks fairly black, gray one is an impression close to . Although it looked black by the degree of light, of course, it was not blacke
The color purchased this time is a Pearl black.
Although there is also a hit degree of
light, and a photograph looks fairly black, gray one is an impression close to
.
Although it looked black by the degree of light, of course, it was not blacker than that he imagined and it
Was.
Since how to stick is a transfer Type, as for
demand, how to stick fundamentally is adopted in positioning of a one-shot deal, but the surely more anxious one should use a neutral detergent water solution in an explanatory note at less than
1%.
It seems that it is and can perform position repair of some.
A use place is used for the part currently attached to the pure Gas tank this time [
].
If it sticks well so that
air may not enter, it is not different from
HONDA wing mark currently attached to the pure Gas tank, and looks finely.
If a Size and a color suit the direction which considers use of a
HONDA wing mark, it will be a Recommendation.
View detail
Although the Tank of the APE was equipped, it is a Just fit in Size!! The form of the Decal is also satisfactory.
Although the Tank of the APE was equipped, it is a Just fit in Size!! The form of the
Decal is also satisfactory.
View detail