Reviews
LED Tail Unit is the best!
I have previously installed Bulb Type LEDs from Motorcycle Supply Store,
Small and Stop brightness is almost the same (hard to tell if Brake is applied).
I was just looking for something better.
The brightness of Small and Brake is enough to check the hat Drill and
I was satisfied with Large!
View detail
It's just so bright!
It's brighter anyway, and I don't have to worry about the bulbs running out!
Easy to install, just pop it on! I'm very satisfied!
View detail
Fits: KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400
Good
I was going to change the bulb because the rear light was dark, but I decided to buy it because I thought it would be better to change it to LED. It's easy to replace, so it's easy and good. View detail
For those of you who say CB Tail lamps are 2 round lamps!
It uses an open Battery.
CB750 that seems to have some electrical concerns.
Power savings (likely to be effective) and
Hoping to be Dress-up (look good)
And installation is easy.
Been in use for over 3 years, no blown bulbs, etc.!
Unfortunately, I can't see it myself while driving. (Lol)
View detail
No problem installing it!
It has a handmade feel to it, but I had no problems with the installation.
In the case of R1-Z, the tail light is two lights, so it is a form of wiring to the socket of one side one light.
It's just a moment to remove and install the Cover.
The essential brightness has become brighter, but it's self-satisfying because it's a place where you can hardly see yourself.
When I changed the Blinker to LED, I installed the Tail lamp as well.
It's pricey, but I chose this one because it's more reliable than the dubious Yahoo!
The wiring coking is also waterproof, so I was able to rest assured in that aspect.
View detail
Easy kit to convert Tail lamp to LED
This kit allows you to easily convert your existing Lamp to LED by simply replacing it. Simply insert the harness into the original lamp and you are ready to install.
The original Lamp has two bulbs, but Kit's Wiring connects to only one. You may need to be careful about rainwater intrusion.
Because the arrangement of LED is a design which reminds you of CB400SF, the appearance is also cool and visibility is improved remarkably. There may be energy saving effect by LED especially for RC42 which has weak electric equipment.
View detail
CB750rc42 2008 MODEL
Easy to install!
Great visibility!
It's self-serving, but 3150!
View detail
very good
Installation is easy and brightness is also necessary enough.
I think that it is a good product with high visibility.
I was surprised because there was no installation manual,
It was easy to install.
View detail
very good
CB750 RC42 2006
I changed from OEM's Light.
As we all wrote, we were able to exchange with Driver alone.
I pushed the two OEMLight and turned it like turning it and pushed this product to the opened Socket and installed it.
Since this product is one socket, it will be finished if it is installed in either one.
Leave one left alone (Remove Light) So I'd like to close it with something.
The brightness that illuminates the brightness of the Stop-lamp and the Number is also perfect.
I thought that I wanted to reduce the load of Battery, power saving and exchanged.
Very easy, finished in a very good feeling, I am satisfied.
View detail
Fits: HONDA motorola, HONDA v-twin magna [v-twin magna]., HONDA V-TWIN MAGNA [V-Twin Magna] S, HONDA TOPIC [Topic]., HONDA TOPIC [Topic] PRO, HONDA NS-1, HONDA JADE [Jade]., HONDA GYRO [Gyro] X, HONDA GYRO [GYRO] UP50, HONDA GB250 CLUBMAN [Clubman] Type 4, HONDA GB250 CLUBMAN [CLUBMAN] Type 1, HONDA gb250 clubman type 1 - type 4, HONDA CB-1 400, HONDA motorola, HONDA v-twin magna [v-twin magna]., HONDA V-TWIN MAGNA [V-Twin Magna] S, HONDA TOPIC [Topic]., HONDA TOPIC [Topic] PRO, HONDA NS-1, HONDA JADE [Jade].
Untitled
Arrived in 3 days after ordering
Once installed, Size is perfect
It was easy to install! Also looks with the product image
It is bright and it seems like LED will be recognized soon
The price is high, but ...
But I am satisfied with Large change!
View detail
Fits: SUZUKI GSX250S KATANA [Katana]., SUZUKI GSX400S KATANA [Katana]., SUZUKI IMPULSE400 [Impulse]., SUZUKI GSX250S KATANA [Katana]., SUZUKI GSX400S KATANA [Katana]., SUZUKI IMPULSE400 [Impulse].
bright!
Until now I bought the LED Bulb purchased by Yahoo auction, but the difference in brightness between Small lighting and Brake is small, I was worried that the following car will not come in when running and stopping. However, such anxiety disappeared from this LED Unit. Compared with Yahoo auc's LED Bulb, the brightness at the time of Small lighting became much brighter and I think that the difference from when you hit Brake is solid.
The Reverse side of UnitBody is Coking and Waterproof is also perfect. Although it is expensive, it is Recommendation because it is possible to remove the Valve of OEM and leave it as it is.
View detail
Fits: HONDA XR350, HONDA XLR250, HONDA XL250 [Degree]., HONDA VRX400, HONDA TLR200, HONDA NSR50, HONDA GB400 TT, HONDA FTR223, HONDA CRM250 AR, HONDA CBR400 F, HONDA XR350, HONDA XLR250, HONDA XL250 [Degree]., HONDA VRX400, HONDA TLR200, HONDA NSR50, HONDA GB400 TT, HONDA FTR223, HONDA CRM250 AR, HONDA CBR400 F
It shines beautifully
Visibility from the side is not good, but it looks beautifully when looking from directly behind in Smoked lens.
Visibility well from a fairly long distance and good visibility from the back is good.
View detail
Old Motorcycle is now Motorcycle!
Until now, how many types of LED bulbs have I worn, but I did not care for brightness at the same time and did extra expenses
I regret having to do this from the beginning.
But I am convinced now!
View detail
Fits: SUZUKI gsx1100s katana [katana]., SUZUKI GSX750S KATANA [Katana]., SUZUKI gsx1100s katana [katana]., SUZUKI GSX750S KATANA [Katana].
Voltage stability
I got lost as to whether to make Made in China with a lower price to exchange as Assi, but I chose this in terms of confidence. I was able to install it to KATANA without problem. As a precaution when installing, it is necessary to remove the light bulb, insert the Socket firmly all the way inwards, then turn it to lock it. Otherwise the License lamp will not light up.
Even if the rectality is normal, when the Stop-lamp is lit with LightOn in the Idling state waiting for the signal, the voltage drops to the 11v level. That Spec. Maybe it's pretty exciting to watch the voltmeter. When this LED is replaced, the voltage no longer drops. I think that it is better to exchange those who have similar circumstances by all means.
View detail
Fits: YAMAHA XG250 TRICKER [Tricker]., YAMAHA VINO [Vino] (SA10J) (2-stroke model), YAMAHA VINO (5AU) (2-stroke model), YAMAHA serow 250 [serow]., YAMAHA serow 225 [serow] (type 2), YAMAHA serow 225 [serow] wwe, YAMAHA serow 225 [serow] w, YAMAHA serow 225 [sero] s, YAMAHA XG250 TRICKER [Tricker]., YAMAHA VINO [Vino] (SA10J) (2-stroke model), YAMAHA VINO (5AU) (2-stroke model), YAMAHA serow 250 [serow]., YAMAHA serow 225 [serow] (type 2), YAMAHA serow 225 [serow] wwe, YAMAHA serow 225 [serow] w, YAMAHA serow 225 [sero] s
- He buys it and there is no loss.If it is into [ dark ] , a difference is known clearly.It seems that the visibility from and a following car becomes good. and exchange were dramatically easy. It is enough if there is a Plus driver in th
- He buys it and there is no loss.If it is into [ dark ]
, a difference is known clearly.It seems that the visibility from
and a following car becomes good.
and exchange were dramatically easy.
It is enough if there is a Plus driver in the case of a XG250 TRICKER.
View detail
Since it was a weak Motorcycle of the Battery, it purchased targeting power-saving. attachment is super-simplicity, one + Driver, and 5 minutes. Although there is no description, it has no problem! When goods were gained to beginn
Since it was a weak Motorcycle of the Battery, it purchased targeting power-saving.
attachment is super-simplicity, one + Driver, and 5 minutes.
Although there is no description, it has no
problem!
When goods were gained to
beginning, it thought a handmade feeling is uncanny --, and felt some uneasy.
When the light was made to switch on after
attachment, it is uniform and
visibility felt it high rather than the electric lamp with a Beauty light.
It does not change even now which passed for six months.
Although the price was wavering highly, they were goods in which
satisfaction goes.
View detail
Fits: KAWASAKI ZEPHYR400χ [Zephyr]., KAWASAKI ZEPHYR400χ [Zephyr].
It purchased for energy saving of the prevention from a rear-end collision, and a Battery. I think that it is brightly conspicuous since there are more balls than the LED Tail of other company. attachment is easy -- past -- it is -- ♪
It purchased for energy saving of the prevention from a rear-end collision, and a Battery.
I think that it is brightly conspicuous since there are more balls than the LED Tail of
other company.
attachment is easy -- past -- it is -- ♪
View detail
Fits: HONDA GYROCANOPY [Gyrocanopy]., HONDA GYROCANOPY [Gyrocanopy].
[ -- the re-contribution ] -- [usable years ] -- removing the Tail lens stopped on the two [attachment] Screws about two months, and only substituting the power-source part of this article for the Socket which extracted the Normal valve
[ -- the re-contribution ]
-- [usable years
] -- removing the Tail lens stopped on the two
[attachment]
Screws about two months, and only substituting the power-source part of this article for the Socket which extracted the Normal valve! The hole of this article is united and attached to
tail body Screw receptacle portion.
It is great although the hole Size and the position were probably manufactured with the laser cutter and the Drill by the Exactly.
working hours did not take 5 minutes.
The Tail of lighting and the illuminance difference of the Brake are always [
[wearing effect]
] carrying out clearly, and it can be very much satisfied.
In the
Valve type, there is the visual confirmation effect unique to the Unit type which is not obtained, and it can be declared that it is more than a NORMAL.
The LED Unit purchased before the
[individual subjectivity]
in order to attach to other vehicles,
The resistance included in the Tail side by itself since illuminance difference of a Tail and a Brake was not able to be used few was exchanged, or since it was a made severe thing for which the position of a fitting hole shifts and is sufficient, it was ready for some repair this time also, but it was a completely perfect satisfying thing.
Although the quite expensive thing had resistance, it is the result which convinces him of a price, and considered it as the highest evaluation.
View detail
* which the electric lamp had exhausted since he wanted to reduce the burden on a Battery if possible and which was poured, boiled and exchanged -- since it only changes with a pure Valve, anyone can attach easily. although it cannot check by its
*
which the
electric lamp had exhausted since he wanted to reduce the burden on a Battery if possible and which was poured, boiled and exchanged -- since it only changes with a pure Valve, anyone can attach easily.
although it cannot check by itself while
running -- night -- lighting confirmation, then
-- it turned out that visibility is also going up pure lay clearly.
The always [
] turned-on Tail light is v which is an excellent piece with this price excellent also as a Cost performance in
LED Unit since influence is great to safety and power dissipation.
View detail
Wearing is easy and does not start with 5 minutes.The Screw of the Cover of the Tail lamp is removed with + Driver, a pure Lamp is removed from a two-piece Socket, the Socket of a Kit is inserted in, and it only equips with a Cover. Appearance bec
Wearing is easy and does not start with 5 minutes.The Screw of the Cover of the
Tail lamp is removed with + Driver, a pure Lamp is removed from a two-piece Socket, the Socket of a Kit is inserted in, and it only equips with a Cover.
Appearance becomes quite good touch by easy work.
It is recommended at the nonchalant joke effect.
View detail